External Electrical work for Extension of the second floor with LGSF framing system for the Powergrid Centre of Excellence (CoE) at the Institute Computer Centre, IIT Roorkee

Indian Institute of Technology Roorkee · Roorkee, Uttarakhand · Electrical Equipment & Supplies · open

Key facts

Tender value: ₹91.9L
EMD: ₹1.8L
Published: 08 Oct 2026
Closing date: 29 Oct 2026
Status: open
Status as of: 20 Oct 2026 23:12 UTC
Department: Institute Works Department
Office: Institute Works Department, IIT Roorkee

Description

Percentage-rate electrical works tender for the external electrical work associated with extending the second floor using an LGSF framing system for the Powergrid Centre of Excellence at IIT Roorkee. Estimated cost is Rs. 91.90 lakh inclusive of GST and cess; completion period is 12 months.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No
Certifications: Valid Electrical Contractor License Class-A
Documents required: Affidavit on Rs. 10 non-judicial stamp paper, notarized, regarding establishment of proprietorship firm, partnership deed, or letter of incorporation for a private limited/limited firm, with written power of attorney for the authorized signatory where applicable, Self-certified copies of work orders along with work completion certificates as per eligibility criteria, Proof of online deposit of tender fee and EMD, Valid solvency certificate for at least 40% of the estimated cost, issued by a scheduled bank and not more than one year old from the last date of tender submission, Turnover certificates from CA, preferably with UDIN, GST registration certificate, PAN Card, ESI registration certificate, EPF registration certificate, Project-specific OEM authorization certificate for transformer, RMU and ACBs, Valid Electrical Contractor License Class-A, Qualifying Information (Annexure-A), Notarized undertaking on Rs. 100 non-judicial stamp paper as per the NIT, Undertaking that BOCWW registration certificate will be submitted after award and before submission of the first bill, Duly filled priced BOQ

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Percentage Rate
Evaluation: Percentage rate
Make in India (MII): No
MSE preference: No

Line items (38)

Supplying, installation, testing and commissioning of 1000kVA (continuous loading) BEE 3 Star rated (Corresponding Level as per BIS amended upto date of receipt of tender) , 11/0.433 KV step down, 3 Phase, 50 Hz, Dyn 11 vector group, ONAN (Oil Natural Air Natural) copper wound transformer (Electrolytic grade 99.9% pure copper, Core made of first grade Cold Rolled Grain Oriented (CRGO) Core grade MOH or better, suitable for out door/indoor applications with On Load Tap Changer (OLTC) on HV side having AVR relay and Remote Tap Changer Control (RTCC) for automatic sensing of incoming voltage, automatic operation of OLTC and facility for remote and manual operation of OLTC HV side in range of +5% to -15% in steps of 2.5%, having cable end boxes on HV side suitable for 3x300 sqmm XLPE cable of 11 KV grade, including bus trunking arrangement on LV side including supplying and laying of copper conductor multicore control cable from transformer to HT breaker/panel for safety tripping, complete — Qty: 1 Each
Supply, Installation, testing and commissioning of 200kVAR Automatic Power Factor Correction (APFC) panel, indoor type floor mounted free standing totally enclosed, extendable, IP42, of following capacity for 3 phase, 415 V + 10 %, 50 Hz AC System for Ambient temperature -5°C to +40°C, fabricated in compartmentalized designed made of CRCA sheet steel of 2.0mm thick for framework & covers, 3 mm thick for gland plate i/c cleaning & finishing complete with 9 tank process for powder coated of approved shade ( RAL 7032-Siemens gray or as approved by Engineer-in-Charge), having front section (switch gear and control accessories) and rear section capacitor and reactor, front and rear access, having suitable current carrying capacity, extensible TPN Aluminum alloy bus bar of high conductivity, DMC/SMC bus bar supports, bottom base channel of MS Section, fabrication shall be done in transportable section, entire panel shall have common copper earth bar of minimum size of 25mm x 5mm with 2 nos. — Qty: 1 Set
Supply, Installation, Testing and Commissioning of 11kV, 630Amps, 21 kA/03 Sec, SF6 insulated, 01 way, both side extensionable, Ring Main Unit (RMU) consisting of 01 no. motorised vaccum circuit breaker (VCB) with metering module/ configuration (+V+) compatible with existing RMU Panel ABB make. The work shall be completed including dismantling, disconnections, shifting and re-installation of existing ABB make RMU (CCC+V+M) and busbar connection with new one along with commisioning of the complete set (Old+new) including re-connections of all power & control connections (proctection+metering) as applicable under the direction of the EIC (excluding 11kV cable End Termination kit(s), if required new. Note: Excluding Cable Termination Kit. — Qty: 1 Each
SITC of 800A 03/04 Pole, ICU=ICS=50kA, ICW=50kA (01Sec), Electrical operated drawout , Electric Trip Indication, Communication module mechanical Key lock, Last 20 Trip History 80 Events & suitable for SACDA compatible confirming to 61850, make equivalent to 800LSIG (Schneider) & E1N800A PR121/P-LSIG. — Qty: 3 Each
SITC of 1600A 03/04 Pole, ICU=ICS=50kA, ICW=50kA (01Sec), Electrical operated drawout , Electric Trip Indication, Communication module mechanical Key lock, Last 20 Trip History 80 Events & suitable for SACDA compatible confirming to 61850, make equivalent to 800LSIG (Schneider) & E1N800A PR121/P-LSIG. — Qty: 2 Each
Provinding and Fixing of 630A, 50kA rating and breaking capacity TPMCCB in existing cubucle including drilling holes in cubicle panel, making connections etc. as required. — Qty: 3 Each
Supply, erection, testing and commissioning of factory fabricated metal clad dust and vermin proof- floor mounted 1600A cap 440 V, 50 HZ,3 phase and neutral electric feeder pillar single/ double door 1000-1200 mm depth duly powder coated spray painted with separate chamber for instruments (e.g. ampere meter, volt meter, frequency meter, KWH meter etc.) & switch gears (like I/C & O/G MCB's/MCCB's, C/o switch with extentionable/rotary handle etc.). The feeder pillar/ panel shall have 500Amp, 415V TPN electrolyte aluminium bus bar as per IS 8623 insulated with heat shrink sleeve and mounted on nonhygroscopic supports with detachable side with hinge and locking. The switches shall be completed with lug and cable gland of suitable size of cables with connection as required. The feeder pillar should be made with 2 mm CRCA sheet. The feeder pillar should be fixed on M.S. channel 75mm X 40mm X 6mm size, complete as per direction of site in charge. The panel shall be comprised of indicator and — Qty: 70 Sqft
SITC of 3-Phase 3/4 wire accuracy class 0.5 Digital Multifunction Meter with RS 485 MODBUS communication, large four line seven digit LCD/LED display with quadrant SCADA compatible as per IEC 62052-11 and IEC 62053-22 complete in all respect as per specification. — Qty: 7 Each
SITC of tap wound / and Ring type of CT, ratio (100/5-1600/5), Accuracy class 0.5, Burden 15VA complete with all accessories and connections in all respect. — Qty: 24 Each
SITC of LED Indicator 230V, AC complete with all connections including all mounting accessories in all respect. — Qty: 20 Each
Supply and laying of copper conductor, XLPE insulated, armuored, PVC sheathed cable, 1100V grade, 3.0 Core 2.5 sqmm on existing cable tray with M.S. clamps/ Cable tie etc. of suitable size or as directed by the Engineer-Incharge, complete in all respects. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. — Qty: 500 Meter
Supply and laying of aluminium conductor, XLPE insulated, armuored, PVC sheathed cable, 1100V grade, 4.0CX400 sqmm at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with bumt bricks on sides and on top. On surface, the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respects. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. The cable shall be laid by boring the road as required and compaction of soil & repairing of surface in prior shape shall be done properly.. — Qty: 25 Meter
Supply and laying of aluminium conductor, XLPE insulated, armuored, PVC sheathed cable, 1100V grade, 1.0CX800 sqmm at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with bumt bricks on sides and on top. On surface, the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respects. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. The cable shall be laid by boring the road as required and compaction of soil & repairing of surface in prior shape shall be done properly.. — Qty: 80 Meter
Supply and Laying of 01.0CX800sqmm, XLPE insulated, armoured/ armoured as required, PVC sheathed cable, 1100V grade, on existing Hume pipe/ masonary duct (Trench)/ cable tray with M.S. clamps etc. of suitable size or as directed by the Engineer-In-charge, complete in all respects. The armouring of the cable shall be properly connected with the earth conductor as required etc. — Qty: 640 Meter
Supply and Laying of Aluminium conductor, XLPE insulated, armoured, PVC sheathed cable, 11lkV(UE) grade, 3 coreX185 sqmm at a depth of 1000mm below the ground level over a cushion of 75 mm thick sand, alround and protected with burnt bricks on side and top. On surface, the cable shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-In-Charge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps. etc. The cable shall be laid by boring the road asa required and compaction of soil & repairing of surface in prior shape shall be done properly. — Qty: 25 Meter
Supply and laying of 3CX185 Sqmm, XLPE insulated, armoured, PVC sheathed cable, 11kV (UE) grade, on existing Hume pipe/ masonary duct (Trench)/ cable tray with M.S. clamps etc. of suitable size or as directed by the Engineer-In-charge, complete in all respects. The armouring of the cable shall be properly connected with the earth conductor as required etc. — Qty: 25 Meter
Removal or Laying of ane number PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade up to 35 sqmm size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. — Qty: 10 Meter
... do but above 185 sqmm and up to 400 sqmm — Qty: 10 Meter
Removal or laying of one noumber PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade up to 35 sqmm size direct in ground including excavation and refilling the trench etc as required. but excluding sand cushioning and protective covering. — Qty: 5 Meter
do but above 185 sqmm and up to 400 sqmm — Qty: 5 Meter

2 tender document(s) available — sign up to download.

Related tenders

SUPPLY OF V.F TRANSFORMER OF RATIO 470:600 OHMS (CYLINDER TYPE) — Electrical Equipment & Supplies · Madhya Pradesh
Handheld Rechargeable Pocket Torch — Electrical Equipment & Supplies · Madhya Pradesh
Procurement of Digital Dial Indicator and Stainless Steel Flexible Magnetic Base stand — Electrical Equipment & Supplies
Contact Lever Complete of Tap Changer to M/s. REPL's Pt. No. - S-2506 or to RDSO's Drg. No. - SKEL-4659 (Alt. - 1) — Electrical Equipment & Supplies · West Bengal
Supply, Installation, Testing and Commissioning of standalone IP-CCTV cameras system at Digital Library, Main Building, TMH — Electrical Equipment & Supplies · Maharashtra · ₹6.1L
PROCUREMENT, SUPPLY, INSTALLATION, TESTING AND COMMISIONING OF LED TRACK 24 MTR — Electrical Equipment & Supplies · Maharashtra
Supply and Installation of Illuminated Name Board with LED Back Light Letters — Electrical Equipment & Supplies · Maharashtra
HIRING OF SERVICES FOR INTERNAL CIRCUIT WIRING, SWITCH BOARD FITING AND ENERGY EFFICIENT LED POINT C — Electrical Equipment & Supplies · Maharashtra