Extension work (first floor) of UCF building, Halduchaur, Nainital

Uttarakhand Awas Evam Nirman Sahkari Sangh Ltd. · Halduchaur, Nainital, Uttarakhand · Civil Works & Infrastructure · open

Key facts

Tender value: ₹56.9L
EMD: ₹1.1L
Published: 04 Nov 2026
Closing date: 19 Nov 2026
Status: open
Status as of: 05 Nov 2026 08:43 UTC
Office: Managing Director, Kashipur

Description

Extension of the first floor of the UCF (soybean) administrative building in Haldwani, Nainital. The work is a percentage-rate civil works tender with an estimated value of Rs. 5,690,000, an EMD of Rs. 114,000, and a completion period of 12 months. Participation is restricted to contractors registered with Uttarakhand Awas Evam Nirman Sahkari Sangh Ltd. and holding Class A building-work contractor status.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No
Certifications: Contractor registration with Uttarakhand Awas Evam Nirman Sahkari Sangh Ltd., Class A contractor category in building work
Documents required: Registration Certificate, Income tax PAN, GST Registration Certificate, Rs. 100 non-judicial stamp paper with Rs. 1 revenue ticket, duly signed, FDR of Rs. 1,14,000 pledged in favor of the Managing Director, Uttarakhand Awas Evam Nirman Sahkari Sangh Ltd., Demand Draft for tender cost of Rs. 4,720, Bid Security Declaration

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Percentage
Evaluation: Financial bid of qualified bidder/firm in technical bid will be opened
Make in India (MII): No
MSE preference: No

Line items (96)

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works above plinth lev — Qty: 50.77 Cu M
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more — Qty: 6974.53 Kg
Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts — Qty: 38.22 Sq M
Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick — Qty: 122.22 Sq M
Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick — Qty: 219.81 Sq M
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured). Suspended floors, roofs, landings, beams and balconies (Plan area to be measured) — Qty: 185.57 Sq M
Edges of slabs and breaks in floors and walls. Under 20 cm wide — Qty: 57.08 R m
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) — Qty: 60.28 Cu M
15 mm cement plaster on the rough side of single or half brick wall of mix: 1:6 (1 cement: 6 fine sand) - OUTER PLASTER — Qty: 317.42 Sq M
12 mm cement plaster of mix: 1:6 (1 cement: 6 fine sand) - INNER PLASTER — Qty: 189 Sq M
Cement Plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement : 20 mm cement plaster. — Qty: 2.59 Sq M
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) — Qty: 41.63 Kg
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws — Qty: 1.8 Sq M
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). — Qty: 1.8 Sq M
Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). — Qty: 1.8 Sq M
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.5 mm thick — Qty: 1.8 Sq M
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 9.97.1 300x10 mm — Qty: 2 Each
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 9.96.1 300x16 mm — Qty: 1 Each
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete. — Qty: 1 Each
Providing and fixing aluminium hanging Floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Single rubber stopper — Qty: 1 Each

2 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
Construction of Segregation Shed and Community Compost Pit at K.N.Savulur H/O K.Naduhalli — Civil Works & Infrastructure · Tamil Nadu · ₹4.0L
Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L