Expansion/Repairing and Renovation of SNCU/PICU at Civil Hospital, SNCU, Goalpara District under NHM, Assam

National Health Mission · Goalpara, Assam · Civil Works & Infrastructure · open

Key facts

Tender value: ₹34.3L
EMD: ₹69K
Published: 23 Oct 2026
Closing date: 12 Nov 2026
Status: open
Status as of: 25 Oct 2026 14:21 UTC
Department: National Health Mission, Assam
Office: Office of the Mission Director, National Health Mission, Hengrabari, Guwahati

Description

National Health Mission, Assam invites item-rate bids for expansion, repair and renovation of the SNCU/PICU at Civil Hospital, Goalpara. The estimated value is Rs. 34,32,477, the completion period is 3 months, and the tender requires bid security of 2% for General/OBC bidders and 1% for SC/ST bidders. Bidders must meet similar-work experience and turnover criteria.

Eligibility & requirements

Past performance: 80%
Startup relaxation: No
MSE relaxation: No
Documents required: Documents defining the constitution or legal status, place of registration, and principal place of business, Power of attorney of the bid signatory, Construction work values for each of the last five years, Similar-work experience and details of ongoing or committed works, including client references, Major construction equipment proposed for the contract, Qualifications and experience of key site management and technical personnel, Profit and loss statements and auditor's reports for the past five years, Bank-certified evidence of access to lines of credit and financial resources equal to 10% of contract value, not more than 3 months old, Undertaking to invest a minimum cash amount up to 25% of contract value during implementation, PAN Card, GST Registration, Labour License registration under EPF & MP Act, 1952, Bank solvency certificate or credit facilities, Affidavits, including affidavits for tie-up of electrical and anti-termite license, Site visit undertaking countersigned by the concerned Site Engineer, Construction methodology and schedule, including planning charts and PERT & CPM diagram as necessary, Project organization flow chart, duties and responsibilities, methodology of working, test and inspection plan, and safety documents

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Item Rate
Evaluation: Lowest evaluated bid; preference in case of equal evaluated bid amounts for bidders with prior hospital building project experience
Make in India (MII): No
MSE preference: No

Line items (97)

Earth work in excavation for foundation trenches of walls, retaining walls, footings of columns, steps and septic tank etc. including refilling ( return filling ) the quantity as necessary after completing of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. ( Upto a depth of 2m below the existing ground level ) In ordinary soil. In ordinary soil — Qty: 106.26 Cu.m.
Earth/Sand filling in plinth in layer not more than 150 mm thick including necessary carriage,watering,ramming etc. complete as directed and specified including payment of land compensation, Forest Royalty, Sales Tax and other duties and taxes as may be necessary ( With river sand or silt by truck carriage including loading and unloading ) With hill sand obtained by truck carriage loading and unloding,and to the site of work — Qty: 10 Cu.m.
With silt (predominantly non plastic) by truck carriage including loading and unloding — Qty: 20.5 Cu.m.
Plain Cement concrete Works with coarse aggregate of size 13 mm to 32mm in foundation of steps, footing of column and plinth beam as directed and specified including dewatering if necessary and curing complete (shuttering where necessary shall be measured and paid separately) in prop. 1 cement:3 Sand :6 Coarse aggregate by volume. (a)in prop. 1 cement:1.5 Sand :3 Coarse aggregate by volume.(using mixure machine) — Qty: 18.13 Cu.m.
Providing brick soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a).Brick on flat soling. — Qty: 50 Sq.m
Brick work in cement morter with 1st class brick including racking out joints and dewatering if necessary, and curing complete as directed in substructure upto plinth level ( in prop. 1:4 ) (a) In proportion 1:3 — Qty: 8.2 Cu.m.
(b) In proportion 1:4 — Qty: 7.9 Cu.m.
112 mm thick 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (a). In cement mortar in proportion 1:4.(1 cement:4 sand) (a) In cement morter in proportion 1:4(1 cement :4 sand) — Qty: 340.8 Sq.m
Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. — Qty: 40.4 Sq.m
Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete (upto 1st floor level). From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL/ Star Durgapur (i) TMT Corrosion resistant steel (CRS) reiforcement bar — Qty: 25.36 Qtl
Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and proping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0 m and removal of the same for in-situ reinforced concrete and plain concrete work. Foundation,footings,bases of columns,pile cap, raft and mass concrete work etc. Using 25 mm think plank — Qty: 26.87 Sq.m
Sides of tie beams, grade beams etc. at or below ground level. Using 25mm thick plank — Qty: 52.56 Sq.m
Columns, Pillars, Posts & Strut Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face Using 25mm thick plank — Qty: 31.77 Sq.m
Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties For depth not exceeding 1.0M. Using 25 mm think plank — Qty: 72.68 Sq.m
Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like Floors etc. upto 200mm in thickness Using 25 mm think plank — Qty: 14.77 Sq.m
Providing and laying plain/reinforced cement concrete works cement with coarse sand &20 mm down graded stone aggregate including dewatering if necessary and curing complete but excluding cost form work and reinforcement RCC work (Form work reifocement will be measured and paid separately) Using mixer machine In sub - structure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. M 20 or Prop. 1:1.5:3 — Qty: 39 Cu.m.
In super structure from plinth level up to 1st floor level.Coloumns, pillars,posts,struts,suspended floor,roof,landing,shelf and support,balcony,lintel,sill band,beam,girder,bressumer,cantilever,staircase(except spiral staircase and landing) including preparing the top surface and finishing the nosing.. M 20 or Prop. 1:1.5:3 — Qty: 27 Cu.m.
Providing, fitting and fixing anodised aluminium windows and ventilators of standard sections without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC bl.side hung and top hung ventilators .5mm clear glass — Qty: 4.5 sqm
Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rub (b) 3 Track sliding window (ii)5 mm frosted glass — Qty: 21.9 Sq.m
Providing, fitting and fixing coloured anodised aluminium framed double leaf glazed doors with anodised aluminium frame made of 100mm x 45mm x 2mm sections with door styles of size 81mm x 45mm x 2mm, top rails 50mm x 45mm x 2mm, lock rails 81 mm x 45mm x 2mm,bottom rails 100mm x 45mm x 2mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the Department at all levels. (ii)5 mm frosted glass — Qty: 8.85 Sq.m

3 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
Construction of Segregation Shed and Community Compost Pit at K.N.Savulur H/O K.Naduhalli — Civil Works & Infrastructure · Tamil Nadu · ₹4.0L
Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L