Endolba_I TW
Orissa Lift Irrigation Corporation · Jajpur Road, Odisha · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹27.2L
- EMD: ₹27K
- Published: 03 Nov 2026
- Closing date: 11 Nov 2026
- Status: open
- Status as of: 05 Nov 2026 07:51 UTC
- Ministry: Government of Odisha
- Department: Odisha Lift Irrigation Corporation Limited
- Office: Office of the Executive Engineer, Lift Irrigation Division, Jajpur Road
Description
Percentage-rate turnkey work for drilling, installation and energisation of the Endolaba-I tube well lift irrigation project under Dharmasala Block in Jajpur District. The work includes tube-well drilling, civil works, HDPE/GI pipeline, pump-set installation and electrical energisation. Estimated value is Rs. 2,724,467 and completion period is 90 days.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
- Certifications: Valid PWD contractor license, Registered HT License issued by ELBO, GST Registration
- Documents required: Valid Civil (PWD) and Electrical (HT) licenses, Rig documents, including rig owner's experience certificate, RC Book, fitness, permit, insurance and pollution certificates, Experience certificate issued by a competent authority, GST Registration certificate, PAN card, Registration certificate as proof of contractor class/grade, EMD and tender paper cost payment proof, Joint venture agreement executed before a First Class Magistrate or Executive Magistrate, where applicable, Any other documentation required under the DTCN
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage Rate
- Evaluation: Percentage-rate bidding as per BOQ
- Make in India (MII): No
- MSE preference: No
Line items (60)
- Earthwork in excavation of foundation in hard soil for stiff clay , stiff black cotton, hard red earth, shales, moorum ordinary gravels, including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the Engineer-incharge. (Mechanical 60% & Manual 40%) — Qty: 474.27 CUM
- Filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the Engineer-incharge. — Qty: 4.99 CUM
- Cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc. complete as per the direction of the Engineer-incharge. — Qty: 2.82 CUM
- Brick work with Fly ash Brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the Engineer-incharge. — Qty: 5.39 CUM
- Brick work with Fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in superstructure per cum etc. complete as per the Engineer-incharge. — Qty: 7.06 cum
- 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. — Qty: 68.75 sqm
- R.C.C. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. Size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. — Qty: 3.94 CUM
- 2.5 cm A.S. Flooring with C.C. (1:2:4) using 12mm size black hard granite crusher broken chips of approve quality for approve quorry including water and curring with cost taxes royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. — Qty: 6.25 sqm
- Rigid smooths centering and shuttering for RCC works including false work and dismentgalling then after casting including cot os materials complete. (a) RCC walls and fins including attached pillasters — Qty: 31.11 cum
- b) Chajja/Roof slab — Qty: 10.34 Sqm
- c) Lintel — Qty: 0.68 Sqm
- Labour charge for M.S. reinforcement for R.C.C. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per Qntl. Including cost of HYSD Still Bar (FE 415/ FE 500) — Qty: 1.7 Qtl.
- Filling the foundation and plinth with the excavated material as directed by the Engineer-incharge. — Qty: 473.61 CUM
- Distempering two coats to walls with Distemper of approved shade on new work to give an even shade exculding cost of Distemper. Per 1 Sqm. complete as per the direction of Engineer – in Charge — Qty: 31.99 sqm
- Finishing wall with water proofing cement paint of approved shade two coats to NEW work to give an even shade including cost of cement paints. etc. complete as per the direction of Engineer – in Charge. — Qty: 41.45 sqm
- Writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the Engineer-incharge. — Qty: 1 No
- MS Pannel Door double leafed with MS frame overall size including frame of height 1.2mt x 1.98mt. width for door and shutter of 20 gauge CR sheet pannel as per approved size & specification etc. complete including cost of all materials fitting and fixing the door etc. complete as per the direction of the Engineer-incharge. — Qty: 1 No
- Cost, Supplying of ISI marked 200 mm dia High Density Polythelene (HDPE) Pipes PE 80-PN 4 for water supply as per IS 4984/2016 in the following Nominal diameter, Grades of materials, Pressure rating including the rates of ex-factory, transportation, pre & post inspection, Cess etc complete but excluding the cost of GST etc. complete as per the direction of the Engineer-incharge. — Qty: 120 Mtr
- Fitting and Fixing 200mm dia High Density Polythelene (HDPE) Pipes PE 80-PN 4 Pipe including jointing the pipe including fitting and fixing of required no. of Riser Tee for outlet and Shaddle and nipple for fitting air valve, equal Tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the Engineer-incharge. — Qty: 120 Mtr
- Cost, Supplying of ISI marked 160 mm dia High Density Polythelene (HDPE) Pipes PE 80-PN 4 for water supply as per IS 4984/2016 in the following Nominal diameter, Grades of materials, Pressure rating including the rates of ex-factory, transportation, pre & post inspection, Cess etc complete but excluding the cost of GST etc. complete as per the direction of the Engineer-incharge. — Qty: 646 Mtr
2 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
- Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
- CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
- Construction of Segregation Shed and Community Compost Pit at K.N.Savulur H/O K.Naduhalli — Civil Works & Infrastructure · Tamil Nadu · ₹4.0L
- Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
- Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
- P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L