ELIS from Kulshi River at Makeli, Palasbari LAC under RIDF-XXXII (NABARD) for the year 2026-27 under Palasbari- Jalukbari Division (I) (Package No.-3)

Chief Engineer, Minor Irrigation, Assam · Palasbari, Assam · Civil Works & Infrastructure · open

Key facts

Tender value: ₹28.4Cr
EMD: ₹56.9L
Published: 31 Oct 2026
Closing date: 23 Nov 2026
Status: open
Status as of: 01 Nov 2026 15:13 UTC
Ministry: Government of Assam
Department: Irrigation Department
Office: Office of the Chief Engineer, Minor Irrigation, Assam, Block B, 4th Floor, Janata Bhawan, Dispur, Guwahati

Description

Construction of an electrically lifted irrigation scheme from the Kulshi River at Makeli, including a pressurized pipe irrigation network, control room and operational infrastructure, communications and cloud-based automation, RCC chambers and associated structures, operator rest house, boundary wall, approach road, riverbank protection, stabilization and erosion control, and mechanical and electrical works. Estimated cost is Rs. 2843.328235 lakh; completion period is 18 months.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No
Documents required: Power of Attorney (PoP), Original Affidavit, Technical Bid documents required to be submitted online, Financial Bid

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Item Rate
Make in India (MII): No
MSE preference: No

Line items (189)

2 — Qty: 3 4
Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Upto 80mm dia — Qty: 7258.2 cum
Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil 80mm dia to 300mm dia — Qty: 18310.73 cum
Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil 300mm dia to 600mm dia — Qty: 3432.53 cum
Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Above 600mm dia — Qty: 2332.49 cum
Providing and Laying of HDPE Pipes conforming to IS 4984:2016 (supply up to 110 mm dia. in coil and above 110 mm dia. in straight lengths), and laying and jointing of HDPE pipes by electrofusion welding using suitable electrofusion couplers, saddles and other necessary electrofusion fittings, including surface preparation, alignment, clamping, scraping, heating, fusion and cooling as per the manufacturer’s recommendations and relevant applicable standards, to the required alignment and gradient, including testing of the pipeline to the required pressure, complete in all respects. HDPE (PE-100) PN-6 PIPELINE 63 mm — Qty: 18810 RM
Providing and Laying of HDPE Pipes conforming to IS 4984:2016 (supply up to 110 mm dia. in coil and above 110 mm dia. in straight lengths), and laying and jointing of HDPE pipes by electrofusion welding using suitable electrofusion couplers, saddles and other necessary electrofusion fittings, including surface preparation, alignment, clamping, scraping, heating, fusion and cooling as per the manufacturer’s recommendations and relevant applicable standards, to the required alignment and gradient, including testing of the pipeline to the required pressure, complete in all respects. HDPE (PE-100) PN-6 PIPELINE 90 mm — Qty: 9000 RM
Providing and Laying of HDPE Pipes conforming to IS 4984:2016 (supply up to 110 mm dia. in coil and above 110 mm dia. in straight lengths), and laying and jointing of HDPE pipes by electrofusion welding using suitable electrofusion couplers, saddles and other necessary electrofusion fittings, including surface preparation, alignment, clamping, scraping, heating, fusion and cooling as per the manufacturer’s recommendations and relevant applicable standards, to the required alignment and gradient, including testing of the pipeline to the required pressure, complete in all respects. HDPE (PE-100) PN-6 PIPELINE 110 mm — Qty: 6200 RM
Providing and Laying of HDPE Pipes conforming to IS 4984:2016 (supply up to 110 mm dia. in coil and above 110 mm dia. in straight lengths), and laying and jointing of HDPE pipes by electrofusion welding using suitable electrofusion couplers, saddles and other necessary electrofusion fittings, including surface preparation, alignment, clamping, scraping, heating, fusion and cooling as per the manufacturer’s recommendations and relevant applicable standards, to the required alignment and gradient, including testing of the pipeline to the required pressure, complete in all respects. HDPE (PE-100) PN-6 PIPELINE 140 mm — Qty: 4400 RM
Providing and Laying of HDPE Pipes conforming to IS 4984:2016 (supply up to 110 mm dia. in coil and above 110 mm dia. in straight lengths), and laying and jointing of HDPE pipes by electrofusion welding using suitable electrofusion couplers, saddles and other necessary electrofusion fittings, including surface preparation, alignment, clamping, scraping, heating, fusion and cooling as per the manufacturer’s recommendations and relevant applicable standards, to the required alignment and gradient, including testing of the pipeline to the required pressure, complete in all respects. HDPE (PE-100) PN-6 PIPELINE 160 mm — Qty: 6600 RM
Providing and Laying of HDPE Pipes conforming to IS 4984:2016 (supply up to 110 mm dia. in coil and above 110 mm dia. in straight lengths), and laying and jointing of HDPE pipes by electrofusion welding using suitable electrofusion couplers, saddles and other necessary electrofusion fittings, including surface preparation, alignment, clamping, scraping, heating, fusion and cooling as per the manufacturer’s recommendations and relevant applicable standards, to the required alignment and gradient, including testing of the pipeline to the required pressure, complete in all respects. HDPE (PE-100) PN-6 PIPELINE 200 mm — Qty: 4800 RM
Providing and Laying of HDPE Pipes conforming to IS 4984:2016 (supply up to 110 mm dia. in coil and above 110 mm dia. in straight lengths), and laying and jointing of HDPE pipes by electrofusion welding using suitable electrofusion couplers, saddles and other necessary electrofusion fittings, including surface preparation, alignment, clamping, scraping, heating, fusion and cooling as per the manufacturer’s recommendations and relevant applicable standards, to the required alignment and gradient, including testing of the pipeline to the required pressure, complete in all respects. HDPE (PE-100) PN-6 PIPELINE 225 mm — Qty: 2000 RM
Providing and Laying of HDPE Pipes conforming to IS 4984:2016 (supply up to 110 mm dia. in coil and above 110 mm dia. in straight lengths), and laying and jointing of HDPE pipes by electrofusion welding using suitable electrofusion couplers, saddles and other necessary electrofusion fittings, including surface preparation, alignment, clamping, scraping, heating, fusion and cooling as per the manufacturer’s recommendations and relevant applicable standards, to the required alignment and gradient, including testing of the pipeline to the required pressure, complete in all respects. HDPE (PE-100) PN-6 PIPELINE 250 mm — Qty: 1600 RM
Providing and Laying of HDPE Pipes conforming to IS 4984:2016 (supply up to 110 mm dia. in coil and above 110 mm dia. in straight lengths), and laying and jointing of HDPE pipes by electrofusion welding using suitable electrofusion couplers, saddles and other necessary electrofusion fittings, including surface preparation, alignment, clamping, scraping, heating, fusion and cooling as per the manufacturer’s recommendations and relevant applicable standards, to the required alignment and gradient, including testing of the pipeline to the required pressure, complete in all respects. HDPE (PE-100) PN-6 PIPELINE 280 mm — Qty: 900 RM
Providing and Laying of HDPE Pipes conforming to IS 4984:2016 (supply up to 110 mm dia. in coil and above 110 mm dia. in straight lengths), and laying and jointing of HDPE pipes by electrofusion welding using suitable electrofusion couplers, saddles and other necessary electrofusion fittings, including surface preparation, alignment, clamping, scraping, heating, fusion and cooling as per the manufacturer’s recommendations and relevant applicable standards, to the required alignment and gradient, including testing of the pipeline to the required pressure, complete in all respects. HDPE (PE-100) PN-8 PIPELINE 355 mm — Qty: 1000 RM
Providing and Laying of HDPE Pipes conforming to IS 4984:2016 (supply up to 110 mm dia. in coil and above 110 mm dia. in straight lengths), and laying and jointing of HDPE pipes by electrofusion welding using suitable electrofusion couplers, saddles and other necessary electrofusion fittings, including surface preparation, alignment, clamping, scraping, heating, fusion and cooling as per the manufacturer’s recommendations and relevant applicable standards, to the required alignment and gradient, including testing of the pipeline to the required pressure, complete in all respects. HDPE (PE-100) PN-8 PIPELINE 400 mm — Qty: 1000 RM
Providing and Laying of HDPE Pipes conforming to IS 4984:2016 (supply up to 110 mm dia. in coil and above 110 mm dia. in straight lengths), and laying and jointing of HDPE pipes by electrofusion welding using suitable electrofusion couplers, saddles and other necessary electrofusion fittings, including surface preparation, alignment, clamping, scraping, heating, fusion and cooling as per the manufacturer’s recommendations and relevant applicable standards, to the required alignment and gradient, including testing of the pipeline to the required pressure, complete in all respects. HDPE (PE-100) PN-8 PIPELINE 500 mm — Qty: 1100 RM
Providing and Laying of HDPE Pipes conforming to IS 4984:2016 (supply up to 110 mm dia. in coil and above 110 mm dia. in straight lengths), and laying and jointing of HDPE pipes by electrofusion welding using suitable electrofusion couplers, saddles and other necessary electrofusion fittings, including surface preparation, alignment, clamping, scraping, heating, fusion and cooling as per the manufacturer’s recommendations and relevant applicable standards, to the required alignment and gradient, including testing of the pipeline to the required pressure, complete in all respects. HDPE (PE-100) PN-8 PIPELINE 630 mm — Qty: 1200 RM
Providing and Laying of HDPE Pipes conforming to IS 4984:2016 (supply up to 110 mm dia. in coil and above 110 mm dia. in straight lengths), and laying and jointing of HDPE pipes by electrofusion welding using suitable electrofusion couplers, saddles and other necessary electrofusion fittings, including surface preparation, alignment, clamping, scraping, heating, fusion and cooling as per the manufacturer’s recommendations and relevant applicable standards, to the required alignment and gradient, including testing of the pipeline to the required pressure, complete in all respects. HDPE (PE-100) PN-10 PIPELINE 400 mm — Qty: 250 RM
Providing and Laying of HDPE Pipes conforming to IS 4984:2016 (supply up to 110 mm dia. in coil and above 110 mm dia. in straight lengths), and laying and jointing of HDPE pipes by electrofusion welding using suitable electrofusion couplers, saddles and other necessary electrofusion fittings, including surface preparation, alignment, clamping, scraping, heating, fusion and cooling as per the manufacturer’s recommendations and relevant applicable standards, to the required alignment and gradient, including testing of the pipeline to the required pressure, complete in all respects. HDPE (PE-100) PN-10 PIPELINE 710 mm — Qty: 350 RM

2 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
Construction of Segregation Shed and Community Compost Pit at K.N.Savulur H/O K.Naduhalli — Civil Works & Infrastructure · Tamil Nadu · ₹4.0L
Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L