EE(AM)/BER-I/eNIT-07/2026-27 GR05
Berhampore-I (A-M) Division · Lalgola, Murshidabad, West Bengal · Repair, Maintenance & AMC Services · open
Key facts
- Tender value: ₹3.3L
- EMD: ₹7K
- Published: 13 Oct 2026
- Closing date: 31 Oct 2026
- Status: open
- Status as of: 21 Oct 2026 00:41 UTC
- Department: Water Resources Development Directorate
- Office: Berhampore (A-M) Circle
Description
Repairing and rewinding 15 induction motors rated 17.5/20 HP for different RLI schemes under Lalgola (Agri-Mech) Sub-Division, Murshidabad. Work includes dismantling, copper-wire rewinding, labour, socketing, testing, shaft repair, painting, varnishing and related services.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage
- Make in India (MII): No
- MSE preference: No
Line items (9)
- (a) Dismantling of different H.P 3 Phase 380-400 Volt 1440 RPM, 4/3 pole 50 cycle for induction motors, removing old burnt out coil from slots carefully, segregating all the parts, washing and cleaning the same thoroughly for verification of serviceable and unserviceable parts as per direction of E.I.C. (i)17.5 H.P/ 20 H.P 3 phase induction motor. — Qty: 15 Each
- Rewinding with approved quality Super Enamel copper winding wire of standard guage as provided by motor manufacturer including slot insulation as per Indian Electrical Rules, shouldering the cable joints properly, taping with 660 V. Grade water proof tape, making new loop terminals heating and vernishing with 'E' class golden vernish (Jhonson & Nicolson make) so as to develop original rated rpm, supplying all necessary materials as mentioned above and reassemblying the motor..(b) 17.5H.P/20H.P 3 phase ,415 volts ,50 Hz ,2/4 pole induction motor. (i) Supply of super enamelled dual coated copper wire conforming IS 13730, 1996, part 13 (18 swg to 22 swg) Required max. weight of super enamelled copper wire is given below: ( 1.) Elech/GEC (New)/crompton/NEC-10.20 Kg,(2) Bicco/AEI-13.1 kg (3) GEC (OLD)-13.5 kgand 16.2 kg(4) kirloskar(new) -9.5 kg and 10.5 kg (5) kirloskar(old)-12 kg,(6)crompton(old)-12.5 kg(6) NGEF-10.5 kg. — Qty: 170.7 Kg
- Labour charge for rewinding , soldering, heat varnishing, bearing changing, reassemling etc. including supply of all materials excluding bearing as mentioned above complete in all respect as per direction of E.I.C — Qty: 15 Each
- Socketing with C.I socket at enlarged bearing housing of any type of 17.5 HP/20 HP motor by oversizing the bearing housing by machine turning & suppling new socket of required size and fitting the same in bearing housing. — Qty: 10 Each
- Testing of repaired motor by contious 8 hrs running at nearest site on load after making necessary connection including fitting fixing and shifting to and form just appeared. — Qty: 15 Each
- Repairing of damage motor shaft by metaling with electric welding and turning properly to house in the bearing space and coupling side teeth and also rectifying the dynamic balance of the rotor to its original alignmrnt to avoide any vibration .All complete as per direction of the EIC. — Qty: 10 Each
- Painting two coats of both inner & outer portion with best quality synthetic enamel paint (to be approved before use) including smoothing surface by sand paper for removing old paint of the motor as per direction of E.I.C. — Qty: 15 Each
- Heat varnishing with best quality (Johnson & Johnson/ Dr. Beck/ Giliander) class 'E' insulating varnish of required quantity for 3 course& uniform heating at 80' Cfor 48 hrs. with all cost of materials, labour asper direction of E.I.C.(c) Insulatingvarnish1 lit for 20 HP induction motor — Qty: 15 Each
- Labour charges for carriage of motor from site /dept store to company workshop and back to site/store after repair including loading unloading and installation the motor on the motor base. This item is only applicable when written permission is available from E.I.C Where is no facility for such work in the sub-division — Qty: 15 Each
1 tender document(s) available — sign up to download.
Related tenders
- Outsourcing of Services for Revitalisation and Surface Refinement of Institutional Furniture — Repair, Maintenance & AMC Services · Maharashtra
- HIRING OF SERVICES FOR WATERPROOFING TREATMENT OF SHED ROOF AT INS HAMLA — Repair, Maintenance & AMC Services · Maharashtra
- Hiring of Services for Crack Cleaning, Polymer Modified Mortar Filling and Epoxy Injection Treatment — Repair, Maintenance & AMC Services · Maharashtra
- Supplying and fixing of 22228K with sleeve and Check Nut HE 328 and V Belt D-358 of MMV installed at OC 1and2 Mine of OSA under Orient Area — Repair, Maintenance & AMC Services · Odisha · ₹2.0L
- Offloading the work of Changing of Clutch Release bearing, Clutch Disc, Fly wheel and Radiator etc. assemblies work of light vehicle truck (UP64H-1338) of Dumper Section, NWS of Khadia Project. — Repair, Maintenance & AMC Services · Uttar Pradesh · ₹1.1L
- Annual Maintenance Service - Desktops, Laptops and Peripherals - DESKTOP/LAPTOP/PRINTERS/SCANNERS; CANON/HP/DELL/ACER/EPSON/BROTHER/TVSE — Repair, Maintenance & AMC Services · Rajasthan · ₹6.0L
- Preventive maintenance of discharge chutes of sink screen, changing of by pass chute of jig bypass conveyor belt along with drive unit of belt at Bhojudih Coal Washery — Repair, Maintenance & AMC Services · West Bengal · ₹5.2L
- Strengthening/ preventive maintenance of V.T. Pumps (Main) of slurry ponds and its structure base and connecting pipelines and pump house at Bhojudih Coal Washery. — Repair, Maintenance & AMC Services · West Bengal · ₹4.9L