EE(AM)/BER-I/eNIT-07/2026-27 GR01

Berhampore-I (Agri-Mech) Division · Lalgola, West Bengal · Civil Works & Infrastructure · open

Key facts

Tender value: ₹5.0L
EMD: ₹10K
Published: 13 Oct 2026
Closing date: 31 Oct 2026
Status: open
Status as of: 21 Oct 2026 00:41 UTC
Department: Water Resources Development Directorate
Office: Berhampore (Agri-Mech) Circle

Description

Repairing and maintenance works on a Twin Hull type steel barge at the Mahammadpur RLI scheme, including shifting and blocking, plate patching/doubling, metalwork, painting, fencing-related works, and transportation.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Percentage
Make in India (MII): No
MSE preference: No

Line items (21)

Shifting of barge to a suitable working site or place from the R.L.I. site and blocking of the barge by area clearance, earth cutting, winching, jacking, planking, block fixing and un-jacking and placing of the R.L.I. site including tools and plants for blocking. (a) Twin Hull Barge (16'6" × 9'0" × 3'0") — Qty: 1 each
Removing the Pump sets installed on the Barge from the foundation including disconnecting. removal of suction and delivery assemblies from the Barge to a secured place and refilling of the same properly after the maintenance of the Barge — Qty: 2 each
Opening, straightening and refitting of plates, angles, purlines, trusses, bollard expanded metal / BRC net, winch etc as required and as per direction of E.I.C. (a) Twin Hull Barge (16'6" × 9'0" × 3'0") — Qty: 1 each
(a) Cost of 5 mm. M.S. plate including wastage due to cutting including labour charges for straightening, fitting, fixing in position. — Qty: 34.765 sqm
(b) Gas cutting to required size of 5 mm. thick M.S. plate, N.S.C Channel etc including labour charges, hire charges for all tools & plants. — Qty: 226.2 mtr
(c) Electric welding charges for 5 mm. thick plate M.S. channels etc and other members of the Barge including labour charges, hire charges for all tools & plants. — Qty: 274.98 mtr
Supplying, fitting and fixing of I.R.C. net (75 mm X 25 mm X 10 SWG) with nuts & bolts of the Barge including gas cutting etc. — Qty: 15.87 sqm
Supplying 1.5 mm (16SWG) MS sheet fitted and fixed on one or both faces of MS bar etc .with point welding not more than 150 mm part complete in all respect and including cost of labour and materials as per direction of EIC. — Qty: 5.15 mtr
Supplying fitting and fixing of MS angle (50x50x6mm) including gs cutting etc. — Qty: 14.04 mtr
Supplying fitting and fixing of 75 mm NB M.S Pipe including gas cutting and welding as fender of Barge. — Qty: 8 mtr
Supplying fitting and fixing of MS flat bar 40mm X 6mm for strenghtening the B.R.C. net including gas cutting etc. — Qty: 15.31 mtr
Supplying fitting and fixing bolt with nuts & washers. (i) 10 to 16 mm dia (a) Length up to 75 mm — Qty: 20 kg
(a) Supplying, fitting and fixing of M.S. channel (Size 75 mm × 40 mm × 6 mm) for base of manhole cover including gas cutting. — Qty: 4.68 mtr
(b) Drilling charges 12 mm dia hole for manhole cover plate and M.S. channel base. — Qty: 20 each
(c) Supplying, fitting and fixing of (1/16)" thickness rubber insertion sheet with 12 nos. drilling hole for watertight arrangement of manhole cover. — Qty: 2 each
Chipping, Scraping, wire brashing and cleaning of the painted surface for keel, hull frame, superstructure deck, fender both inside and outside as per direction of the E.I.C. (a) Twin Hull Barge (Total area 240m² approx) — Qty: 1 each
Cost of Doors (6'0" × 3'0") by point welding with B.R.C. net (75 mm × 25 mm × 10 SWG), 49 mm × 6 mm M.S. flat bar, 6" hings 4 pcs. 10 " hasp bolts - 2 nos. etc. complete as per direction of Engineer-in-Charge — Qty: 1 each
(a) Priming one coat of steel metal surface with synthetic enamel/oil bound primer of approved quality, including smoothening surfaces by sand paper etc. for removal of old painting. — Qty: 148.52 Sqm
(b) Painting with coal tar epoxy paint Two coat of approved make and brand (Minimum dry film thickness DFT 200 micron ) at all location prepared and applied as per manufacturer specifications (on steel surface). — Qty: 148.52 Sqm
Transportation charges for carrying of all materials working devices etc upto the scheme and back. — Qty: 1 each

1 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
imp. Sarvice lane With Nali from Juhi lal colony in Block No 315/4 Block No 317 in ward 84 Zone 3 — Civil Works & Infrastructure · ₹8.3L
GENERAL REPAIR WORK AT JOINT DIRECTOR SECONDARY EDUCATION OFFICE UDAIPUR — Civil Works & Infrastructure · Rajasthan · ₹15.0L
4 NARSAR KARAHIYA SAMPARK MARG SE JUNIOR HIGH SCHOOL TAK PITCH MARG KA LEPAN ANURAKSHAN (SAMANYA MARAMMAT) KARYA.(HOT MIX) — Civil Works & Infrastructure · Uttar Pradesh · ₹15.3L
Laying RMC M40 in various streets of transport nagar ward no. 30 — Civil Works & Infrastructure · Punjab · ₹1.8Cr
Estimate For Laying 315mm Dia UPVC U/G Pipe Line For Outlet RD 13350/R of Shahpurkandi Channel No.3 For Year 2026-27 — Civil Works & Infrastructure · Punjab · ₹51.7L
In Ward-30 Govind Vihar II, work of drain and interlocking tiles from Harendra house to Omendra house and Pravesh house, Sundar house — Civil Works & Infrastructure · ₹19.1L
purani nagar panchayat ke sthan par shoping complex cum office dukan no 05 — Civil Works & Infrastructure · Madhya Pradesh · ₹8.0L