Drilling of tubewell by F.D.R. Machine and Installation of single phase motor pump in various place at ward no. 48
Municipal Corporation Ujjain · Ujjain, Madhya Pradesh · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹6.8L
- EMD: ₹14K
- Published: 17 Oct 2026
- Closing date: 10 Nov 2026
- Status: open
- Status as of: 03 Nov 2026 07:19 UTC
- Department: Urban Administration and Development Department, Government of Madhya Pradesh
- Office: Office of the Executive Engineer, PHE Maint. Division, Nagar Nigam Ujjain
Description
Percentage-rate works tender for drilling three tubewells at various locations in Ward No. 48, Ujjain, and installing single-phase motor pumps. The estimated contract value is Rs. 675,886, the EMD is Rs. 13,520, and the completion period is 3 months.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
- Certifications: GST registration, Valid drilling machine verification certificate
- Documents required: Valid Madhya Pradesh PWD contractor registration in the appropriate class, or proof of application for registration, Bid document fee payment, Earnest Money Deposit payment, Notarized affidavit, GST certificate, PAN card, Checklist, Madhya Pradesh PWD tax clearance certificate, Valid vehicle registration and insurance, Valid drilling machine verification certificate from the Public Health Engineering Department, Proof of ownership of the bidder's drilling machine vehicle or an eligible contract for its use, Documents verifying ISI-marked materials purchased from reputed manufacturers or their authorized representatives
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage
- Evaluation: Lowest evaluated bid
- Make in India (MII): No
- MSE preference: No
Line items (17)
- Carrying out the resistivity survey by VES method using Schlumberger configuration for locating the proper spot for drilling of tube well with in the selected habitation, including Photography, interpretation of resistivity data and submission of report in the desired format along with resistivity necessary graph, photographs and readings. 20.1/254 — Qty: 1 each
- in all types of collapsible strata consisting of soils, clays, sand, moorum, gravel, boulders etc. 20.4.1/P-255 — Qty: 45 met.
- in all types of rocks. 20.4.2/P-255 — Qty: 0.15 met.
- Supply of I.S.I. marked G.I. casing pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per I.S. 1239 (Part-1 & Part-2) 1992 with IVth revision (Up-to-date amendments) 150 mm dia 20.25/P-259 — Qty: 40 met.
- Drilling of perfectly vertical bore hole of 150mm diameter upto desired depth below ground level in all types of rock including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete 20.5/P-255 — Qty: 72 met.
- in all types of collapsible strata consisting of soils, clays, sand, moorum, gravel, boulders etc. 20.2.1/P-254 — Qty: 10 met.
- in all types of rocks. 20.2.2/P-254 — Qty: 0.15 met.
- Supply of I.S.I. marked G.I. casing pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per I.S. 1239 (Part-1 & Part-2) 1992 with IVth revision (Up-to-date amendments) 125 mm dia 20.25/P-259 — Qty: 8 met.
- Drilling of perfectly vertical bore hole of 115 mm diameter up to desired depth below ground level in all types of rocks including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete. 20.3/P-254 — Qty: 8 met.
- Providing and fixing of well cap on top of the tube well for protection m.s. Caps 150 mm dia 20.9/P-256 — Qty: 1 each
- Supplying & Installation of Energy efficiant five star BEE rating ISI Marked required capacity single phase, 50 Hz, 220V, deep well submersible pump Stainless Steel body, suitable for 4"/6" tube well with Contral Panel Starter suitable for Submersible pump with dry run protection, connections, including submersible flat cable ISI marked 3 core copper wire, length equal to head of the pump at duty point + 3mtr. in single or double run (as per requirement of the set/control panel. The size of the cable should be so selected that voltage drop at motor terminal does not exceed the limit of the rated voltage) clamps, bore cap etc. as required as per specifications but excluding pipe, SS/ Nylon wire rope. Make - Kirloskar, falcon, Texmo, Luby & any ISI standard make) 2 HP Head Mt. 163-58 Discharge LPM 10-45 MPPHED SOR Ist Sep. 2023 11.2/P-164 — Qty: 1 each
- Supplying and laying of submersible flat cable ISI marked 3 core copper wire of suitable size with proper clamping of approved make. 2.5 Sq.mm.multi strand 11.5/P-165 — Qty: 150 mtr.
- Supplying and laying of approved Make Nylon rope 12mm thick complete with binding for support of pump and motor 11.6/P-165 — Qty: 130 mtr.
- Labour only for lowering of single phase submersible pumping set of capacity 1 to 3 HP in the tube well with flexible/ rigid pipe line assembly, electrical cable, nylone rope, testing etc. complete including connecting the electrical cable from pump & starter - Depth up to 150 mtr. 26.21/P-330 — Qty: 1 Job
- Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. (50mm & above fusion jointed & below 50mm mechanical jointed) 8 Kg/sq.cm : 32 mm dia UADD SOR VOL. - I 2nd Aug. 2021 7.1.3/P-103 — Qty: 120 R.m
- Providing and fixing gun metal/ brass check (non-return) valves Class-II, female ends, tested to 21.09 kg/sq.cm. Screwed 32mm dia 6.8.4/P-90 — Qty: 1 each
- Providing and fixing G. I. Bend 90 degree in G.I. Pipe line i/c cutting threading testing etc. complete (Old work) 32mm dia 6.27.4/P-95 — Qty: 1 each
4 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
- Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
- CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
- Construction of Segregation Shed and Community Compost Pit at K.N.Savulur H/O K.Naduhalli — Civil Works & Infrastructure · Tamil Nadu · ₹4.0L
- Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
- Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
- P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L