Drawing UG cable from Chambakkara Canal to St Antonys Road
Kerala State Electricity Board Limited · Vytilla, Ernakulam, Kerala · Electrical Equipment & Supplies · open
Key facts
- Tender value: ₹27.8L
- EMD: ₹50K
- Published: 14 Oct 2026
- Closing date: 16 Nov 2026
- Status: open
- Status as of: 03 Nov 2026 08:10 UTC
- Department: Distribution Central
- Office: Project Management Unit, Electrical Circle, Ernakulam
Description
Kerala State Electricity Board Limited invites percentage-rate bids for drawing underground cable from Chambakkara Canal to St Antony's Road under Electrical Section Vytilla, Electrical Division Thripunithura. The work includes HDD installation and laying of 11 kV underground cable, associated pole and electrical works, and related transport. Probable contract amount is Rs. 27,80,585 excluding GST; completion period is 90 days.
Eligibility & requirements
- Experience required: 3 years
- Startup relaxation: No
- MSE relaxation: No
- Certifications: Valid Electrical contractor license, Valid 'A' class HT contract license
- Documents required: Valid Electrical contractor license issued by Government, Valid 'A' class HT contract license or joint venture agreement, Completion certificates for similar works, including current/completed works within the last 3 years, Scanned copy of bounden agreement on Kerala stamp paper worth Rs. 200, Signed tender documents, Price Bid (BOQ), Declaration that the bidder has no direct or indirect connection with concerned Board employees, GST registration certificate, if registered, Digital Signature Certificate
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage
- Make in India (MII): No
- MSE preference: No
Line items (14)
- Providing one Coil Earth using No.8 GI-earth wire (50mm dia, 115 turns) including digging separate pit (0.45x0.45x1.5m) at standard distance away from the pole/structure in ordinary soil & backfilling. — Qty: 4 No
- Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 numbers of poles excluding loading& unloading charges. — Qty: 1 Trip
- Charge for HDD including survey of the information collection regarding underground utilities, survey of utilities pit making, pilot drilling per-remaining pulling 110 MM dia HDD pipe and uncoiling and laying 11 KV UG cable through installed HDD pipe during work at night hours. — Qty: 1000 m
- Transporting UG Cable — Qty: 1 E
- Laying HT XLPE UG cable of sizes beyond 3x185 sq mm and upto and including 3x300 sqmm including conveying cable from Sub Regional Store/stacking place to work site and laying it carefully using cable rollers, taking through stone ware/G.I.pipes at road crossing/culverts/bridges etc. whereever necessary, providing identification tags at 5m intervals, filling the space around the cable with riddled soil and covering the top with bricks, providing cable route markers at 100m intervals, inclusive of cost of all materials (other than cost of GI/HDPE pipe & UG Cable), labour and transport including crane charges excluding excavation and backfilling. — Qty: 1000 m
- Fitting and providing one HT Stay for 11kV pole, including digging and back filling pit in ordinary soil. — Qty: 2 No
- Fitting one set AB switch on existing DP, giving connection and drawing sufficient length of GI earthing leads to the ground for earthing, excluding provision of earthing. — Qty: 2 No
- Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP including conveyance of materials. — Qty: 14 No
- Drilling hole of various sizes on existing Channel/Cross Arm. — Qty: 18 No
- Labour charges for loading HT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle). — Qty: 4 No
- Fitting and erecting one HT PSC Single Pole in position, including fitting cross arm, digging and back filling pit in ordinary soil (as per standards), drawing sufficient length of GI earthing leads from F clamp through V cross arm to the ground for earthing (excluding provision of earthing). — Qty: 4 No
- Mounting and connecting HT XLPE UG cable ends of all sizes upto and including 3x300 sq mm with special type cable clamps, bolts, nuts, terminal protectors etc.including cost of extra materials if needed and giving necessary jumper connections. — Qty: 8 No
- Doing one cable end termination on HT XLPE UG cables of sizes beyond 3x185 sqmm and upto and including 3x300 sq mm using the cable jointing kit supplied departmentally after making fencing,caution board and all other safety measures including charges for cable jointer etc. complete as per the direction of the departmental officers. — Qty: 8 No
- Providing one Earth using GI earth pipe of size 38.1mm dia, 2.5m length including digging separate pit (0.45x0.45x2.5m) at a minimum distance of 1.5m away from the pole/structure and maintaining standard distance between different earth pipes in ordinary soil & backfilling. — Qty: 7 No
2 tender document(s) available — sign up to download.
Related tenders
- SUPPLY OF V.F TRANSFORMER OF RATIO 470:600 OHMS (CYLINDER TYPE) — Electrical Equipment & Supplies · Madhya Pradesh
- Handheld Rechargeable Pocket Torch — Electrical Equipment & Supplies · Madhya Pradesh
- Providing and Installing a New Electromagnetic Flow Meter with telemetery at Bhatera Pump House under Balaghat Mine Water Supply Scheme. — Electrical Equipment & Supplies · Madhya Pradesh · ₹1.7L
- Standing Fan and Other items — Electrical Equipment & Supplies · Arunachal Pradesh
- Supply of Fan Belt Generator, Multiwire 10mm, Electrical Boards, Electric Lighter, Multimeter and Rechargeable Bulb — Electrical Equipment & Supplies · Arunachal Pradesh · ₹1.4L
- UPGRADATION OF POWER SUPPLY SYSTEM OF RADAR FWCS IN 14 CORPS ZONE — Electrical Equipment & Supplies · Ladakh
- Lead Acid Storage Batteries For Motor Vehicles with Light Weight and High Cranking Performance (V2) Conforming to IS 14257 — Electrical Equipment & Supplies · Jammu and Kashmir · ₹30.1L
- AIR PURIFICATION MACHINE — Electrical Equipment & Supplies · Delhi