Development of VVIP suit at Circuit House, Tezpur, with all necessary facilities at Tezpur, Sonitpur, Assam (Right Wing and Left Wing)
Public Works Building and NH Department · Tezpur, Assam · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹48.3L
- EMD: ₹97K
- Published: 26 Oct 2026
- Closing date: 16 Nov 2026
- Status: open
- Status as of: 01 Nov 2026 15:02 UTC
- Ministry: Government of Assam
- Department: Public Works Department (Building)
- Office: Sonitpur District Territorial Building Division, P.W.D., Tezpur
Description
Open competitive works tender for development of the VVIP suite at Circuit House, Tezpur, including necessary facilities in the right and left wings. Estimated work value is Rs. 48,31,140, completion period is 4 months, and bid security is 2% for general category or 1% for reserved category.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
- Documents required: Technical bid documents, Government document proving the bid signatory's identity/signature (such as PAN card or driving licence), Self-undertaking regarding payment of statutory taxes, Original hardcopy of the technical bid documents
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Item Rate
- Make in India (MII): No
- MSE preference: No
Line items (114)
- Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. — Qty: 24.64 cum
- Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead. Of area 3 sq. metres and below. — Qty: 2 each
- Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead. Of area beyond 3 sq. metres. — Qty: 5 each
- Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. — Qty: 342.87 sqm
- Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement : 4 coarse sand). — Qty: 18.16 sqm
- Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. — Qty: 18.16 sqm
- Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. — Qty: 30 kg
- 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. — Qty: 156.75 sqm
- 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement : 4 fine sand). — Qty: 35 sqm
- Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). — Qty: 0.5 cum
- Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. — Qty: 152.1 sqm
- Providing and fixing factory made laminated veneer lumber glazed shutter conforming to IS: 14616 and TADS 15:2001 (Part B), using 4 mm thick float glass panes for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, all as per directions of Engineer-in-charge (Note: Butt hinges and necessary screws shall be paid separately). 30 mm thick shutters — Qty: 18.48 sqm
- Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. 200x10 mm — Qty: 8 each
- Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. — Qty: 8 each
- Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. — Qty: 8 each
- Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work. — Qty: 280 sqm
- Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. — Qty: 280 sqm
- Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. — Qty: 280 sqm
- Applying priming coat with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood). — Qty: 5 sqm
- With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works — Qty: 35 sqm
4 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
- Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
- CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
- Construction of Segregation Shed and Community Compost Pit at K.N.Savulur H/O K.Naduhalli — Civil Works & Infrastructure · Tamil Nadu · ₹4.0L
- Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
- Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
- P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L