DEPOSIT-Revamping phase III-Supply installation, testing and commissioning of Additional LAN in High Court of Kerala -LAN revamping-General Electronics Work
Public Works Department · Ernakulam, Kerala · Networking & Telecom Equipment · open
Key facts
- Tender value: ₹1.6Cr
- EMD: ₹50K
- Published: 08 Oct 2026
- Closing date: 25 Nov 2026
- Status: open
- Status as of: 27 Oct 2026 03:48 UTC
- Ministry: Government of Kerala
- Department: Public Works Department
- Office: Electronics Division Thrissur
Description
Supply, installation, testing and commissioning of additional LAN infrastructure at the High Court of Kerala, including distribution and access switches, racks, structured cabling, fibre links and network points. The system warranty is 5 years.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
- Documents required: Valid and active Kerala PWD contractor registration or registration with a State or Central Government Engineering Department having similar functionalities, in the required category, Details required for e-payment, including bank account details with core banking facility and bidder email address, Make and model of quoted items, AMC quote proforma
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Item Rate
- Make in India (MII): No
- MSE preference: No
Line items (22)
- OD280318/2024-2025:Supply, Installation, Testing and Commissioning of 24 port Data Center Switch with minimum 24 x 1GE/10GE SFP+ fiber ports and minimum 2 x 40GE/100GE QSFP+/QSFP28 uplink ports, dual hot-swappable redundant AC power supplies, switching capacity 880 Gbps or higher, forwarding rate 1309 Mpps or higher, MAC address table 64K or higher, support for IPv4/IPv6 static routing and dynamic routing protocols such as RIPv1/v2, RIPng, OSPFv2/v3 or equivalent, wherever OEM-supported and licensed, IEEE 802.3ad LACP, MC-LAG / equivalent multi-chassis link aggregation, Layer 3 hardware-based switching/routing, LLDP, LLDP-MED, storm control, loop protection / loop guard / equivalent, traffic mirroring / port monitoring / equivalent troubleshooting feature, and centralized management, configuration, monitoring and reporting through OEM-supported management platform and/or external NMS, compliant with relevant international safety and EMC certifications such as FCC, CE, RCM, VCCI, BSMI, — Qty: 4 each
- OD280320/2024-2025:Support Pack for one datacenter switch for 5 years directly from the OEM which includes 24×7×365 access to OEM Technical Assistance Center (TAC) via phone, email, and web portal, Firmware and software upgrades during the support period, Hardware replacement service with Advanced RMA, Access to OEM support portal, documentation, and technical advisories, Proactive security and product updates as released by OEM — Qty: 2 set
- OD280050/2024-2025:Supply, Installation, Testing and Commissioning of 48-Port Layer 3 Access Switch or higher with following minimum specifications: 48 × GE RJ45 Ports (PoE+); 4 × 10GE SFP+ Uplink Ports; PoE Budget -Minimum 700W; Switching Capacity Minimum 176 Gbps; Forwarding Rate Minimum 130 Mpps; MAC Address Table Minimum 32K; Layer 3 Features IPv4/IPv6 Static Routing; Routing Protocols RIPv1/v2, RIPng, OSPFv2/v3 or equivalent; Link Aggregation IEEE 802.3ad (LACP); LAG Group Size Minimum 8; Stacking / Virtualization Support for switch stacking / virtual chassis / equivalent technology; Key FeaturesLLDP, LLDP-MED, Storm Control, Loop Protection (Loop Guard or equivalent), IP Conflict Detection & Notification or equivalent, Port Mirroring / Traffic Monitoring / Virtual Wire (for troubleshooting), MC-LAG / Multi-chassis Link Aggregation or equivalent, Device Detection Endpoint profiling / device identification (MAC/IP-based), Management Support centralized and/or controller-based manag — Qty: 7 each
- OD280051/2024-2025:Supply and installation of 24 port Access Switch with minimum 24x GE RJ45 and 4x 10GE SFP+ ports. Switching throughput - 128 Gbps, Forwarding Capacity - 190 Mpps, 16K MAC Address, 1GB DDR4,256MB flash,redundant AC power supply,IPv4 and IPv6 static routing. RIPv1/v2, RIPng, OSPFv2/v3 Should support IEEE 802.3ad Link Aggregation with LACP,Link Aggregation Group Size 8, Should support virtual wire between two ports for troubleshooting,should support Static L3 hardware-based routing ,Switch should support IP conflict detection and notification,should support LLDP, should support Storm Control, LoopGuard,LLDP-MED, MCLAG(Multi-chassis link aggregation.Switch should support Device Detection to understand the type of device operating systems, display the IP address.,Should support centralized security management, configuration and reporting through a single console from existing switch controller or from external NMS RIPv1/v2, RIPng, OSPFv2/v3, Certification FCC, CE, RCM, VC — Qty: 2 each
- OD280053/2024-2025:Supply, Installation, Testing and Commissioning of 24-Port Layer 3 Access Switch or higher with following minimum specifications: 24 × GE RJ45 Ports (PoE+); 4 × 10GE SFP+ Uplink Ports; PoE Budget- Minimum 370W; Switching Capacity Minimum 128 Gbps; Forwarding Rate Minimum 95 Mpps; MAC Address Table Minimum 16K; Layer 3 Features IPv4/IPv6 Static Routing; Routing Protocols RIPv1/v2, RIPng, OSPFv2/v3 or equivalent; Link Aggregation IEEE 802.3ad (LACP); LAG Group Size Minimum 8; Stacking / Virtualization Support for switch stacking / virtual chassis / equivalent technology; Key FeaturesLLDP, LLDP-MED, Storm Control, Loop Protection (Loop Guard or equivalent), IP Conflict Detection & Notification or equivalent, Port Mirroring / Traffic Monitoring / Virtual Wire (for troubleshooting), MC-LAG / Multi-chassis Link Aggregation or equivalent, Device Detection Endpoint profiling / device identification (MAC/IP-based), Management Support centralized and/or controller-based manage — Qty: 5 each
- OD280491/2024-2025: Supply, Installation, Testing and Commissioning of 24 Port fully loaded 1U Rack mountable LIU(Swing Type)with Splice tray ,pigtails and cable management. Approved Make: AFL, Belden, corning, Molex, R and M, Sterlite — Qty: 18 each
- OD280475/2024-2025:Supply and installation of 10 G base single mode Optical Transceiver SFP+ module with minimum reach of 10 KM, same make as switch OEM. — Qty: 34 each
- OD280495/2024-2025: Supply and installation of UL listed ETL 4 channel verified 1U rack mountable 24 port CAT-6 fully loaded patch panel with individually removable RJ45 &RJ11 compatible jacks.contact plating:1.27micrometers Au/Ni rear cable organizer,pannel should be made of cold rolled steel,powder coated ,front labelling facility required .operating life: Min.750 insetion cycles,Durability:Min. 200reterminations,dust covers to protects from dust&contaminants ,Material: Black powder coated CRS.Thickness :Min.1.52mm,front &rear port labelling as well as panel identification label-RoHS compliant including termination charges. Approved Make: Actassi, Belden, Molex, Panduit, R and M, Commscope — Qty: 21 each
- OD280496/2024-2025:Supply ,termination ,testing and commissioning of UL listed ETL 4 channel verified Information Outlet with CAT-6 keystone jack with dust protection,suitable for 22-24AWG bare copper conductor,contact plating: 5micron gold/Nickel as per TIA/EIA 568-B colour code confirming to the standards ANSI/TIA-568.2D,ISO/IEC 11801,IEEE 802.3,ISO/IEC 60332,UL94V-0 rated or equivalent,Min. 500 insertion cycles and 100 reterminations and RoHS compliant. Preferred make: Molex/ AMP/Legrand/Actassi/ Belden /R and M/ Sytimax — Qty: 380 each
- OD280494/2024-2025:Supply ,termination ,testing and commissioning of UL listed ETL 4 channel verified 1 Mtr CAT-6 (LSZH) Giga UTP patch cord having LSZH jacket,24AWG bare copper conductor UTP 4pair both end factory crimped with modular male plugs with min.500 insertion cycles terminated as per TIA/EIA 568-B colour code confirming to the standards ANSI/TIA-568.2,ISO/IEC 11801,IEEE 802.3,ISO/IEC 60332-1 and RoHS compliant. Preferred make: Actassi/ Belden/ Panduit,/ Molex/ R and M/ Commscope. — Qty: 380 each
- OD280493/2024-2025:Supply ,termination ,testing and commissioning of UL listed ETL 4 channel verified 3 Mtr CAT-6 (LSZH) Giga UTP patch cord having LSZH jacket,24AWG bare copper conductor UTP 4pair both end factory crimped with modular male plugs with min.500 insertion cycles terminated as per TIA/EIA 568-B colour code confirming to the standards ANSI/TIA-568.2,ISO/IEC 11801,IEEE 802.3,ISO/IEC 60332-1 and RoHS compliant. Preferred make: Actassi/ Belden/ Panduit,/ Molex/ R and M/ Commscope. — Qty: 380 each
- OD280606/2024-2025:Supply, drawing. testing and commissioning of UL certified and ETL 4Channel verified 23 AWG bare copper conductor UTP 4 pair Unarmoured U/UTP CAT 6 cable with HDPE Insulation Material and LSZH Outer Jacket, conforming to the standards ANSI/TIA-568.2-D, ISO/IEC 11801,IEEE802.3, ISO/IEC 60332-1, ISO/IEC 61034-2, ISO/IEC 61754-2,Colour Code as per TIA/EIA 568-B, RoHS Compliant, transmission performance tested up to 500 MHz or better and Insertion Loss/Attenuation: 33 dB/100m or better at 250 MHz in the existing conduit as required.Prefered make: Molex,Panduit,Actasi ,Commscope — Qty: 22360 metre
- OD280621/2024-2025:Supply,laying,testing , certification and documentation of 3m LSZH RoHs compliant single mode fibre patch cord.Prefered make: Molex/Belden/Commscope/Legrand — Qty: 40 each
- OD280488/2024-2025:Supply, laying, testing and commissioning of 12 Core Single-Mode OS2 armoured Optical Fibre Cable, , with unitube construction, corrugated steel tape armour (ECCS or equivalent), with peripheral strength members such as two steel wires/ OEM-standard equivalent, waterblocking, UV-resistant LSZH outer sheath, rodent-resistant construction and anti-termite protection , suitable for direct buried / duct / aerial installation as applicable, minimum short-term tensile strength 1500 N, minimum crush resistance 2000 N/10 cm or equivalent, operating temperature range not less than -20°C to +/-70°C, maximum attenuation 0.40 dB/km at 1310 nm and 0.30 dB/km at 1550 nm or better, compliant with IEC 60793-2-50, ITU G.652D and RoHS compliant. Preferred Make : Molex/Commscope/Corning — Qty: 9700 metre
- OD372839/2025-2026:Supply and installation of 40GE QSFP+ optical transceiver module, compliant with 40GBase-LR4, supporting single-mode fiber, minimum 10 km transmission distance, LC connector, and operating temperature 0°C to 70°C, suitable for equipment having QSFP+ / QSFP28 ports with same make as distribution switch OEM — Qty: 8 each
- OD372840/2025-2026:Supply and installation of QSFP+ 40 Gigabit Ethernet optical transceiver module, compliant with 40GBASE-LR4, suitable for single-mode fiber, supporting minimum 10 km transmission distance, Duplex LC connector, and digital optical monitoring, compatible with equipment having QSFP+ ports. for existing Juniper Core switch, Accepted Make : Juniper QSFPP-40G-LR4-C — Qty: 8 each
- OD280489/2024-2025:Supply and fixing of 19 inch 15U (600mmx 650mm) rack with covered wire manager, cooling fan(2Nos), 2XAC distribution box, with side open and all other accessories. Make:- Rittal/Valrack — Qty: 14 each
- OD280490/2024-2025:Supply and fixing of 19 inch 42U (600mmx 1000mm) rack with dual power supply Aluminum extruded Frame structure, covered wire manager, cooling fan(4Nos), AC distribution box, dummy plates and all other accessories. Accepted make:-Netrack — Qty: 2 each
- 1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm — Qty: 2570 metre
- 1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm — Qty: 4000 metre
5 tender document(s) available — sign up to download.
Related tenders
- Providing separate internet connectivity and network infrastructure for centralized CCTV monitoring at the Mine gate, Siding, Workshop, Pit top, Administrative office and winder driver cabin at gumgaon mine — Networking & Telecom Equipment · Maharashtra · ₹1.9L
- Custom Bid for Services - Upgradation of LAN Connectivity — Networking & Telecom Equipment · Uttarakhand · ₹22.5L
- Supply, Installation, Commissioning, Testing and Support of Network Switches at Various Locations/Offices & AMC in Maharashtra Telecom Circle — Networking & Telecom Equipment · Maharashtra · ₹38.3L
- PROCUREMET OF FIBER OPTICS CABLES AT BPCL MR — Networking & Telecom Equipment · Maharashtra
- Supply of Ethernet Cables, Computer Printer and Layer 2 Access Switch — Networking & Telecom Equipment · Jammu and Kashmir · ₹70K
- RF CABLE and LAN CABLE WITH CONNECTOR — Networking & Telecom Equipment · Jammu and Kashmir
- Digital VHF Repeater Set as per MHA QR — Networking & Telecom Equipment · Telangana
- SITC of Navtex at MCC Kandla including all associated accessories — Networking & Telecom Equipment · Gujarat · ₹15.4L