Conversion of existing hall at 2nd floor to meeting cum training hall at Sadder Treasury Srinagar
PWD · Srinagar, Jammu and Kashmir · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹74.2L
- EMD: ₹1.5L
- Published: 13 Oct 2026
- Closing date: 11 Nov 2026
- Status: open
- Status as of: 04 Nov 2026 05:27 UTC
- Department: Public Works Department
- Office: Executive Engineer (R&B) Electric Division Kashmir
Description
Works tender for conversion of an existing second-floor hall at Sadder Treasury, Srinagar, into a meeting-cum-training hall. The BOQ includes civil works, interior finishes and furniture-related work, electrical wiring and fittings, lighting, UPS, and associated installation and maintenance.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage
- Make in India (MII): No
- MSE preference: No
Line items (100)
- Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: 1:3:6 or richer mix (i/c equivalent design mix) — Qty: 5.09 Cum
- Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) — Qty: 5.09 Cum
- Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead :Thickness above 25 mm upto 40 mm. — Qty: 68.77 Sqm
- Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, includ — Qty: 104.55 Sqm
- Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shades, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of tile 600x600 mm — Qty: 104.55 Sqm
- Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.40mm thick with 20 mm nominal size stone aggregate incl. cost and carriage of materials involved complete. — Qty: 104.55 Sqm
- Providing and fixing of PVC wall panelling of superior quality of make like wall face or equivalent (0'10" x 10'0") including all necessary fittings and accessories etc complete as per directions of Engineer-in- charge. — Qty: 1400 Sft
- Providing and fixing of oval shaped table with 30 seater minimum capacity of size (17 feet in length, 30 inch in height, 24 inch in top width) with 19mm ply board (ply to ply) including cost of sunmica (8mm thick) of commercial quality, hardware, adhesives with budloo frame of 2"x2" including cost of beading, carriage and placing at site of superior quality as per the directions of Engineer-in-charge at site complete. — Qty: 62.57 Sqm
- Providing and fixing of 0.8 mm thick textured dulmica/ sunmica of superior quality and approved brand manufacture incl. carriage, adhesives, complete job to be fixed on table as per the directions of Engineer-in-charge at site complete. — Qty: 125.13 Sqm
- Providing and fixing of plastic 60mm dia PC Desk Grommet Cable Tidy Wire Hole Cover of superior quality as per the directions of Engineer-in-charge at site complete. — Qty: 18 No.
- Providing and fixing of Ornamental beading ofrequired shape and size of standard quality incl. carriages, adhesive etc. as per the directions of Engineer-in-charge at site complete.(wooden) — Qty: 178.35 Sqm
- Providing and fixing wire gauze shutters using galvanized M.S. wire gauze ofaverage width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge Second class Kail wood 35mm — Qty: 8.92 Sqm
- Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture — Qty: 8.92 Sqm
- Renewing glass panes, with wooden fillets wherever necessary : Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) — Qty: 3.35 Sqm
- Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. — Qty: 117.1 Sqm
- Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) — Qty: 8.92 Sqm
- Tower Bolts 100 mm — Qty: 24 No.
- Handles 125 mm — Qty: 12 No.
- Hinges 75 mm — Qty: 24 No.
- Eye Hook — Qty: 12 No.
1 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
- Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
- CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
- Construction of Segregation Shed and Community Compost Pit at K.N.Savulur H/O K.Naduhalli — Civil Works & Infrastructure · Tamil Nadu · ₹4.0L
- Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
- Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
- P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L