Construction work at Government Industrial Training Institute, Ramnagar (Nainital)
Uttarakhand Agriculture Produce Marketing Board · Ramnagar (Nainital), Uttarakhand · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹2.2Cr
- EMD: ₹4.4L
- Published: 04 Nov 2026
- Closing date: 18 Nov 2026
- Status: open
- Status as of: 05 Nov 2026 08:45 UTC
- Department: Uttarakhand Agriculture Produce Marketing Board
- Office: Office of General Manager (Technical), Mandi Bhawan, Rudrapur
Description
Construction of the Government Industrial Training Institute at Ramnagar, Nainital, Uttarakhand. Estimated cost is Rs. 2,19,60,000 and the completion period is 12 months. Bids are invited through a single-stage, two-envelope e-procurement process.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
- Documents required: Letter of Bid, Bidder details and supporting documents, Qualification criteria forms and supporting documents, Earnest Money Deposit proof or applicable Bid Securing Declaration and exemption proof, Tender document fee payment proof
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage
- Make in India (MII): No
- MSE preference: No
Line items (182)
- Earth work in excavation in trenches for foundation and for pipes cables etc. in ordinary soil including fitup to 1.5m and dressing of sides and ramming bottoms and disposal of surplus excavated earth as directed by the engineer with in a lead of 50m. — Qty: 305.31 cu.m
- Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration — Qty: 239 Sqm
- Filling available excavated earth (excluding rock) in trenches ,plinth,sides of foundation etc . in layers not exceeding 20cm in depth ,consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m . — Qty: 332.54 cu.m
- Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. — Qty: 45.57 cu.m
- Providing and laying in position cement concrete 1:4:8 (1cement :4 coarse sand:08graded brick aggregated 40mm .nominal size.) excluding the cost of centering and shuttering - All work upto plinth level. — Qty: 71.27 cu.m
- Making plinth protection 50mm thick of cement concrete 1:3:6 (1cement :3 coarsesand : 6graded stoneaggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. — Qty: 89.28 sq.m
- Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).All works upto plinth level Concrete of M25 grade with minimum cement content of 330 kg /cu. — Qty: 102.23 cu.m
- Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).All works above plinth level upto floor V level 5.33.2.1 — Qty: 267.05 cu.m
- Centering shuttering including strutting, propping etc. and removal of form work FOUNDATION UP TO PLINTH. — Qty: 301.22 Sqm
- Centering shuttering including strutting, propping etc. and removal of form work COL SUPER STRUCTURE. — Qty: 375.06 Sqm
- Centering shuttering including strutting, propping etc. and removal of form work Roof Beam. — Qty: 709.11 Sqm
- Centering shuttering including strutting, propping etc. and removal of form work Slab. — Qty: 857.85 Sqm
- Centering shuttering including strutting, propping etc. and removal of form work Staircase. — Qty: 90.45 Sqm
- Centering shuttering including strutting, propping etc. and removal of form work Lintel+sunshade. — Qty: 76.73 Sqm
- Reinforcement for R.C.C work including straighting,cutting,bending ,placing in position and bending all complete Thermo-Mechanically Treated bars. — Qty: 43698 Kg
- 230 th Brick work with brick of class designation 75 in foundation & plinth in cement mortar 1:6 . — Qty: 23.41 cu.m
- Half brick masonry with F.P.S bricks of class designation 75 in superstructure above plinth level up to floor five level in cement mortar 1:4 ( 1 cement : 4 coarse sand). — Qty: 58.56 sqm
- Extra for providing and placing in position 2 Nos. 6mm dia. M.S.bars at every third course of half brick masonry (with F.P.S.bricks). — Qty: 58.56 sq.m
- Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws — Qty: 53.24 Sqm
- Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. — Qty: 2451.6 kg
2 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
- Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
- CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
- Construction of Segregation Shed and Community Compost Pit at K.N.Savulur H/O K.Naduhalli — Civil Works & Infrastructure · Tamil Nadu · ₹4.0L
- Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
- Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
- P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L