Construction of Various Yard Works Under Package-Newai-01/2026-27 KUMS Newai
Rajasthan State Agricultural Marketing Board · Tonk, Rajasthan · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹5.7Cr
- EMD: ₹11.4L
- Published: 29 Oct 2026
- Closing date: 17 Nov 2026
- Status: open
- Status as of: 03 Nov 2026 06:15 UTC
- Department: Rajasthan State Agricultural Marketing Board
- Office: Executive Engineer, RSAMB Division Kota
Description
Construction of two yard works at KUMS Newai, Tonk district: a self-supported covered auction area in front of C Block and a self-supported roof over the open auction area in the F & V Yard. Estimated cost is Rs. 571.75 lakh and completion period is 12 months.
Eligibility & requirements
- Past performance: 33.33%
- Startup relaxation: No
- MSE relaxation: No
- Certifications: GST certificate
- Documents required: Valid contractor registration/enlistment certificate, Valid GST certificate, Signed Annexures A, B, C and D, Potential assessment bid and completed assessment schedules, Certificates from the concerned Engineer-in-Charge verifying completed works, Information regarding financial resources and capability in Schedule I, Information regarding works executed in the last five years in Schedule II, Information regarding personnel required for deployment in Schedule III(c), Information regarding maximum value of civil engineering works executed and similar completed works in Schedule IV(A) and IV(B), Information regarding existing commitments and ongoing works in Schedule V(A) and V(B), Litigation or arbitration details in Schedule VI, Affidavit of correctness on Rs. 1,000 non-judicial stamp paper, Proof of deposit of EMD, RISL processing fee and tender fee
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage
- Evaluation: Percentage rate; financial bids opened only for bidders meeting potential assessment criteria
- Make in India (MII): No
- MSE preference: No
Line items (36)
- Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils — Qty: 974 P.Cum
- Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. "1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). — Qty: 11 P.Cum
- Supplying and Filling in plinth with blown sand under floors including watering ramming consolidating and dressing complete including cost of sand. — Qty: 81 P.Cum
- Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. — Qty: 392 P.Sqm
- Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix — Qty: 263 P.Cum
- Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : Columns, pillars, posts and struts etc. — Qty: 375 P.Sqm
- Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M20 grade Nominal Mix / Design Mix — Qty: 58 P.Cum
- Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) Thermo-mechanically Treated bars (Conforming of relevent IS code) — Qty: 38520 P.kg
- Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. "M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)." — Qty: 162 P.Cum
- Structural steel work in single section fixed with or without connecting plate including cutting, hoisting ( height upto 10 m), fixing in position and applying a priming coat of approved steel primer all complete. — Qty: 38627 P.kg
- Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: — Qty: 138744 P.kg
- Providing flashing of 40 cm over all width in plain, G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts, G.I. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 (1cement : 3 coarse sand) 1.00mm thick sheet — Qty: 70 P.Mtr
- Providing valleys of 90cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8mm dia. G.I. limpet and bitumen washers complete : 1.60mm thick with zinc coating not less than 350gm/m² — Qty: 400 P.Sqm
- Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required. 0.63 mm thick with zinc coating not less than 275 gm/m2 — Qty: 3940 P.Sqm
- Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work — Qty: 4867 P.Sqm
- Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :20mm thick. — Qty: 375 P.Sqm
- Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm — Qty: 375 P.Sqm
- Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. 1: 3: 6 or richer mix. — Qty: 163 P.Sqm
- Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils — Qty: 236 P.Cum
- Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. "1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). — Qty: 11 P.Cum
3 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
- Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
- Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
- CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
- Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
- Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
- P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L