Construction of various infrastructures at Dung, Teh-Munsiyari, distt- Pithoragarh UKD

Indo-Tibetan Border Police Force · Dung, Munsiyari, Pithoragarh, Uttarakhand · Civil Works & Infrastructure · open

Key facts

Tender value: ₹8.9Cr
EMD: ₹17.8L
Published: 02 Nov 2026
Closing date: 23 Nov 2026
Status: open
Status as of: 07 Nov 2026 02:47 UTC
Ministry: Ministry of Home Affairs
Department: Indo-Tibetan Border Police Force
Office: SHQ (ALM), Kosi Almora

Description

Construction of various infrastructures at Dung, Tehsil-Munsiyari, District Pithoragarh, Uttarakhand. Estimated cost is Rs. 8,92,17,367, with completion within 36 months (3 working seasons).

Eligibility & requirements

Past performance: 80%
Startup relaxation: No
MSE relaxation: No
Certifications: GST registration, EPF registration, ESIC registration
Documents required: Certificates of satisfactory completion for qualifying similar works, Contractor enlistment order in appropriate class and building construction category, GST registration, PAN Card / TAN No, Signed tender form, EPF and ESIC registration, exemption notice, or affidavit/proof of application, Scanned self-attested copy of EMD, Solvency Certificate for minimum 40% of estimated cost, Audited CA certificate of financial turnover in Form A, CA certificate confirming profit after tax criteria in Form A, Declaration of non-blacklisting/debarment in Form B, Abstract of cost of work supporting similar-work calculations, MoU for joint venture work, where applicable

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Percentage rate
Evaluation: Percentage rate
Make in India (MII): No
MSE preference: No

Line items (75)

Earth work in surface excavation by manual mean over area exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth upto 50 m and lift upto 1.5 m, disposed soil to be levelled and neatly dressed : All kinds of soil — Qty: 180 Nos
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil — Qty: 819.03 Nos
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. Below flooring — Qty: 371.28 Nos
Providing and laying Cement conrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm River single/ hand brocken ) excluding the cost of centering and shuttering upto plinth level : Cement Ordinary porland 43 grade conforming to IS No: 8112-1989 brand like CCI, ACC, Ultratech, Vinay, Star, Ambuja, Binani only, 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm River single/ hand broken) — Qty: 168.55 Nos
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand). — Qty: 361.81 Nos
Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete :1:3:6 (1 Cement: 3 coarse sand(zone-III) : 6 graded stone aggregate 20 mm nominal size) — Qty: 448.65 Nos
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete. — Qty: 327.24 Nos
Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers — Qty: 868.98 Nos
Centering and shuttering including strutting, propping etc. and removal of form for : Shelves (Cast in situ) — Qty: 118.86 Nos
Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts — Qty: 415.5 Nos
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources) — Qty: 89.53 Nos
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centring, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) — Qty: 46.13 Nos
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). — Qty: 23.39 Nos
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. — Qty: 10542.19 Nos
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. — Qty: 8185.97 Nos
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). ( Local cheer/ Surahi) wood — Qty: 8.909 Nos
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked black enameled M.S. butt hinges with necessary screws ( screws should be of stainless steel and brand Magnum/ Nettle fold/ Amul) excluding, panelling which will be paid for separately, ( thickness of shutters should be 35 mm)- first class local wood ( Tita champa/ pine confirming IS- 399:1963 ( Weight of should be 545 kg/ M3) Note- The shutters should be confirming IS 1003 (part-2): 1994 35 mm thick first class local wood (deodar/ shisham). — Qty: 108.4 Nos
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to40 mm thick : first class local wood: (i) Local wood panells should be fixed only with grooves but additional beading should be provided on both sides, stiles, rails and panels in door shutters shall be of the same species of timber. (ii) Lock rail of door shutters shall be so placed that its certerline is at aheight of 850 +55mm from the bottom of shutters, each door shutters shall be fixed to the frame with three hinges one at the center and other two at 200 mm from top and the bottom of the shutters. (iii) All door shutters shall be finished smooth with well planed faces and panels of shutters shall be flat and well sanded to a smooth and level surface. (Iv) In case of double leaved shut — Qty: 56.32 Nos
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes pans of brand Modi float, Atul, Saint Gobain, Golden only. Weight of glass pan should be 10.00 kg/sqm. Including black enamelled ISI mark Butt hinges with nessessury screws. (screws should be of stainless steel and brand Magum/ Nettle fold/ Amul) First class local wood (deodar/shushm)- 35 mm thick. — Qty: 62.34 Nos
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes pans of brand Modi float, Atul, Saint Gobain, Golden only. Weight of glass pan should be 10.00 kg/sqm. Including black enamelled ISI mark Butt hinges with nessessury screws. (screws should be of stainless steel and brand Magum/ Nettle fold/ Amul) First class local wood (deodar/shushm)- 35 mm thick. — Qty: 55.84 Nos

2 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L