CONSTRUCTION OF ROAD AND PARKING MOTHER AND CHILD CARE CENTRE (BLOCK-K), GMCH SECTOR-32, CHANDIGARH.

Construction Circle - I · Chandigarh, Chandigarh · Civil Works & Infrastructure · open

Key facts

Tender value: ₹53.8L
EMD: ₹1.1L
Published: 02 Nov 2026
Closing date: 09 Nov 2026
Status: open
Status as of: 04 Nov 2026 06:31 UTC
Ministry: Chandigarh Administration
Department: Engineering
Office: CP - I

Description

Construction of road and parking at the Mother and Child Care Centre (Block-K), GMCH Sector-32, Chandigarh. The work includes excavation, subgrade preparation, granular sub-base and wet mix macadam, bituminous surfacing, kerbs and channels, road markings, signage, paver blocks and associated finishing.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Percentage
Make in India (MII): No
MSE preference: No

Line items (16)

Excavation for road work in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m complete in all respects and to the entire satisfaction of Engineer in charge. (NS) — Qty: 761.62 Cum
Preparation and consolidation of sub grade after loosening of the ground upto a level of 500 mm below the sub-grade level, watered, graded and compacted in layers to meet requirement of table 300-2 for sub-grade construction complete in all respect in all respects and to the entire satisfaction of the Engineer in charge. (NS) — Qty: 577.38 Cum
Providing, laying, spreading and compacting 100 to 250mm granular sub base material compacted of natural sand, morrum, gravel crushed stone or combination thereof as per MORT&H specification confirming to clause 401 coarse graded grading – III as per table 400.1 of MORT&H specification, including spreading on the prepared sub grade with the help of tractor with planner of adequate capacity maintaining the requited slope and grade during operation, rolling with road roller 8-10 tone with the grade and cross fall (camber) to be checked and any high spot or depressing which becomes apparent, corrected by removing or adding fresh material, including cost of tools and plants, carriage of material from stacks, templates, barrier, lighting arrangement at night, chowkidar and maintenance of diversion etc. complete in all respect as per MORT&H specifications, density of GSB as laid 2 gms/cc complete in all respect and to the entire satisfaction of Engineer in charge. (NS) — Qty: 311.61 Cum
Construction of compacted 250mm Wet Mix Macadam thick to confirming to clause 406 of MORT&H (Ministry of road transport and highway)specification (5th edition) having as laid, density of 2.2gm/c.c (Two point Two gram per cubic centimeter) by providing laying, spreading and compacting clean, crushed aggregate and granular material(taking 1.8 cum material for 10 sqm (Ten square metre) area conforming to Table 400.12(Physical characteristics) Table 400.11 (grading) of MORT&H (Ministry of road transport and highway)specifications (4th edition). The material shall be premixed with water at OMC in Mixing Plant/Pan type mixer/Pug Mill and mixed material carried to site by tippers and spread uniformly and evenly on the prepared sub base/base by paver finisher of adequate capacity and all high and low spots remedied by removing or adding aggregate, as required and rolled with 8-10 (Eight to ten tones) tones roller to achieved/desired density. It shall included the cost of tools and plants, carr — Qty: 288.69 Cum
Providing and applying primer coat with bitumen emulsion (Rapid Setting, packed) on prepared surface including cleaning of road surface and spraying bitumen at the rate of minimum 6 Kg./10sqm with bitumen pressure sprayer complete in all respects as per clause 502 of MORT&H specification ( 4th edition) complete in all respect in all respects and to the entire satisfaction of the Engineer in charge. (NS) — Qty: 1154.76 Sqm
Providing and fixing factory manufactured precast concrete kerb of size 300mm x 300mm having 150mm thickness duly vibrated, mechanically and compacted made of P.C.C 1:2:4 duly cured and finished. The rate further include filling of joints between kerb with cement mortar 1:2 complete in all respect and to the entire satisfaction of thr Engineer in charge. (NS) — Qty: 337.63 Rmt
providing and fixing factory manufactured precast concrete channels of size 300 x 300mm having 75mm thickness duly vibrated, mechanically and compacted made of P.C.C 1:2:4 duly cured and finished. The rate further include filling of joints between kerb with cement mortar 1:2 complete in all respects and to the entire satisfaction of the Engineer-in-Charge. (NS) — Qty: 168.55 Rmt
Providing and laying Tack Coat with bitumen VG-10 using sprayer @ 3.0kg/10 sqm on prepared bituminous surface, heating bitumen in boiler and spraying the bitumen with spray set fitted on bitumen boiler cleaned with narial broom complete in all respect as per MORT&H (5th revision) specification of clause 503 to the entire satisfaction of engineer in charge. (NS) — Qty: 1154.76 Sqm
Providing and laying Dense Graded Bituminous Macadam 50mm thick in layers with mechanical paver after mixing aggregates and bitumen as per design mix in Hot Mix Plant using minimum @ 4.5% (by wt of total mix) bitumen VG -30 of total mix with aggregate conforming to relevant specification laid in MORT&H with grading conforming to Table 500-10 grading II of MORT&H specifications (5th revision) and rolling with smooth wheeled, vibratory and tandem rollers as per clause 501.6 and 501.7 to achieve the desire density of dense graded bitumen macadam as laid 2.3 gm/cc & to the entire satisfaction of Engineer-in-Charge. (NS) — Qty: 57.74 Cum
Providing and laying tack coat with bitumen VG-10 @ 2.50 kg/10 sqm using sprayer pump on prepared surface heating bitumen in boiler and spraying bitumen with spray set fitted on bitumen boiler including cleaning of road surface with complete in all respect as per MORT&H (5th revision) specification clause 503 and to the entire satisfaction of the Engineer-in-charge. (NS) — Qty: 4483.6 Sqm
Providing and laying 30mm bituminous concrete as per clause 507 of MORT&H specification with mechanical paver after mixing aggregate and bitumen as per design mix in Hot mix plant using minimum 5.4% bitumen of grade VG- 30 and using both coarse and fine aggregate filler stone dust @2% by weight of aggregate confirming to relevant specification laid in MORT&H specification clause 507.2.2 and 507.2.3 with grading confirming to table 500.17 gradation –II of MORT&H specification and density of bituminous concrete as laid 2.35 gm/cc complete in all respect as per MORT&H specification and to entire satisfaction of Engineer-in-charge. (NS) — Qty: 134.51 Cum
Providing and applying of hot thermoplastic compound 2.5mm thick for edge lines, centre lines, stop lines, zebra crossings, letters, numerals, diagonals and chembrons etc. including reflectorising glass beads @250gms. Per Sqm. Area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to level, uniform and free from streks and holes. The thermoplastic compound shall be screeded/extruded on the surface in moltan state by suitable machine capable of controlled preparation and laying of surface application of glass beads at a specific rate. The marking should be capable of resisting deformation by traffic, it should not be slippery when wet and marking shall not deteriorate by contact with sodium chloride, Calcium chloride or oil dropping from traffic. The material shall be free from all skin, dirt and foreign objects and shall comply as per table 800-9 and 800-10 complete in all respect as per Clause 803.4.1 of MORT&H specification (5th revis — Qty: 151.06 Sqm
Manufacturing ,supplying and fixing retro reflective Mandatory / Regulatory signs sign boards consisting of 600 mm Dia sign boards and definition plate of Size 600x230mm made up of 3mm thick ACP sheet,rivted with 25x25x3mm angle iron frame, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other color combination including subject matter, message ,symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and welding the same with 3660mm high vertical post of M.S. angles of size 50x50x5 mm welded with hold fast of same size 225 mm long at the bottom end to be embedded in ground with cement concrete 1:2:4 block of size 300 x 300 x 450mm. The plate is to be processed by stove enamel paint of approved brand and painting white and black color — Qty: 4 Nos.
Providing and applying white washing (One or more coats) on the cement concrete surface of alternate kerbs after cleaning the surface with painting brush and arrangement of traffic control by providing three legged jhandies and cautionary boards etc. complete in all respect and to the entire satisfaction of Engineer -In-Charge. (NS) — Qty: 111.52 Sqm
Providing and applying bitumastic paint one coat of approved quality duly ISI marked on the cement concrete surface of alternate kerbs after cleaning the surface with painting brush and arrangement of traffic control by providing three legged jhandies and cautionary boards etc. complete in all respect and to the entire satisfaction of Engineer -In-Charge. (NS) — Qty: 111.52 Sqm
Providing and fixing 60 mm thick ISI approved high density rubber moulded precast cement concrete paver blocks grey / coloured designer, polished, manufactured by vibro hydraulic pressure process having wearing layer of 6mm to 8mm thick with Cement and fine aggregate mix ratio 3:1 (three cement and one fine aggregate) and under layer consisting of design mix of cement, sand and fine aggregate having designation M-35 including best quality of colour and hardening agent. The pavers should be complied with tensile strength and breaking load as per BIS 6717-1993 and shall be tested against resistance to wear as per IS:1237-1980. The paver should be laid over a layer of 25 mm thick screened coarse sand to the required slope and filling the joints with fine sand etc. complete in all respect and to the entire satisfaction of Engineer-in-charge. (NS) — Qty: 229.22 Sqm

1 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
Construction of Segregation Shed and Community Compost Pit at K.N.Savulur H/O K.Naduhalli — Civil Works & Infrastructure · Tamil Nadu · ₹4.0L
Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L