Construction of Public Distribution Shop at Ward No 5 Near Muthalamman Kovil Temple Kondamanayakanpatti in Aundipatti Town Panchayat

Theni Zone · Aundipatti, Tamil Nadu · Civil Works & Infrastructure · open

Key facts

Tender value: ₹15.0L
EMD: ₹15K
Published: 29 Sep 2026
Closing date: 15 Oct 2026
Status: open
Department: Directorate of Town Panchayats
Office: Aundipatti Town Panchayat

Description

Construction of a public distribution shop in Aundipatti Town Panchayat including earthwork, concrete, brickwork, flooring, roofing, doors, windows, electrical, and plumbing works with an estimated value of 15 lakh INR.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Open Tender
Make in India (MII): No
MSE preference: No

Line items (28)

Earthwork excavation and depositing on bank with an initial lift of 2M in light black cotton soil. Hard stiff day. Stiff black cotton. Hard red earth, shales, muram, gravel stoney earth etc. as per SS 20B ( TNBP SS No.23 & 24) — Qty: 33 m3
Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers -Mixing by mechanical means — Qty: 8 m3
Supply and filling in basement with Well Gravel well rammed watered and consolidated complying with standard specification. — Qty: 34 m3
Supplying and erecting for sides and soffits including supports and strutting up to 3.29m height for plan surface in all floors with all cross bracing using mild steel sheets of size 90cm and 10 gauge stiffened. Welded with mild steel angels of size 25mm x25mm x3mm for boarding laid over silver oak (country wood) joist of size 10cm centre and supported by casuarinas props of 10cm to 13 cm Dias paced at 74cm center to center etc. complete complying with standard Specification and as directed for the following items. Square column — Qty: 45 m2
Grade Beam — Qty: 33 m2
Plain surface — Qty: 97 m2
Supplying and Fabrication and placing in position mild steel or ribbed or steel for all reinforced cement concrete works as per the design given including cost of Steel and binding wire in all floors etc. complete complying with standard Specification (Ms RTS bars will be supplied departmentally at section stores and cost will be recovered at issue rate) the binding wire shall be supplied by the contractor. — Qty: 2300 kg
Providing and laying in position, standardised concrete Mix M-20 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials) — Qty: 23 m3
Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT — Qty: 27 m3
Finishing the top roof with one course machine pressed tiles of size 20cm x 20cm x 2cm of approved quality laid in cement mortar 1:3 (one cement and three sand) 12mm thick mixed with water proofing compound confirming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar. — Qty: 57 m2
Supply & Fixing of steel door window & other items including cost of material and other labour charges but excluding conveyance from go down and fixing charges as per standard specification. — Qty: 650 Kg
Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc — Qty: 11 m2
celling plastering in cm 1:3 10mm thick including cost and conveyance of all materials to site and all other labour charges including curing etc. as per standard specification. — Qty: 62 m2
Plastering with Cement Mortar 1;5 mix to 12mm thick in all floors including curing etc. complete complying with standard Specification and as directed. — Qty: 283 m2
Providing Granothatic floor finish of the 25mm thick including cost and conveyance of all materials to site and all labour charges and all other incidental charges etc., complete as per standard specification. — Qty: 45 m2
Emulsion Painting two coats with approved colour including cost and conveyance of all materials to site and all labour charges etc, complete — Qty: 340 m2
Painting in two coats of new iron work over Priming coat including cost and conveyance of all materials and all labour charges etc. (Complete (for structural steel work)) — Qty: 20 m2
Dadooing the walls with glazed tiles of 30 c.m x 20 c.m 6mm size laid in cement mortor 1:2 mix 10mm thick and pointing with 0.40 kg white cement per m2 etc. — Qty: 7 m2
Supplying and fixing over the floors best quality of scratch ceramic tiles of 30 c.m x 30c.m x 6mm size of approved colour laying with cement mortor 1:3 mix pointing the joints with colour pigments etc. Complete. — Qty: 3 m2
Supplying and fixing in Position of Indian Oriya pan type water closet with “P’’ or “S’’ trap to set in brick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. complete — Qty: 1 No

1 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
TTPS Operation Circle CAD ACWPH Annual Overhaulinlg DG Set III Attending minor repair works, Dismantling and Cleaning of Heat exchanger, DM water tank and Replacement of Coolant — Civil Works & Infrastructure · Tamil Nadu
Road renovation work on the Fatehpur Minor from km 2.600 to km 5.400 — Civil Works & Infrastructure · Uttar Pradesh
Constuction of Community Compost Pit at Purkhu Panchayat Kot Lower A Khass Block Bhalwal — Civil Works & Infrastructure · Jammu and Kashmir · ₹36K
Facility Management Services - LumpSum Based - Anganwadi Centres — Civil Works & Infrastructure · Jharkhand · ₹25.8Cr
Upgradation of Arjun Mess consisting of following items along with installation — Civil Works & Infrastructure · Telangana
Warehousing Service - Per MT - Monthly Basis - Rehiring of Godown under modified PWS scheme at revenue district — Civil Works & Infrastructure · Jharkhand
Hiring of Third-Party Inspection Agency - Construction / Civil Engineering Works — Civil Works & Infrastructure · Assam