Construction of Mangloor Bakhta road to Mohalla Sai Dev Sthan, Mangloor West
PWD / CE RandB Jammu / SE RandB Kathua Samba / EE RandB Hiranagar · Hiranagar, Jammu and Kashmir · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹77.8L
- EMD: ₹1.6L
- Published: 25 Sep 2026
- Closing date: 12 Oct 2026
- Status: open
- Department: PWD
Description
Construction of road from Mangloor Bakhta to Mohalla Sai Dev Sthan, including earthwork, concrete, reinforcement, paving, and related civil works under road sector (New Works) Capex Budget 2026-27.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage
- Make in India (MII): No
- MSE preference: No
Line items (28)
- Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. — Qty: 984 cum
- Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres. — Qty: 239 cum
- Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m — Qty: 95 cum
- Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) — Qty: 43 cum
- Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) — Qty: 129 cum
- Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). — Qty: 449 cum
- Providing and laying in position specified grade of reinforced cement concrete inclu. curing but excluding the cost of centering, shuttering, finishing & reinforcement. All works upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone agg. 20 mm nominal size) — Qty: 13 cum
- Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. — Qty: 1405 kg
- Centring and shuttering including strutting propping etc and removal of form work — Qty: 525 sqm
- Centring and shuttering including strutting propping etc and removal of form work — Qty: 27 sqm
- Centring and shuttering including strutting propping etc and removal of form work — Qty: 704 sqm
- Edges of slabs and breaks in floors and walls above 20 cm wide — Qty: 5 sqm
- Hand packing stones in wire crates including the cost of stones and cost of crates. — Qty: 77 cum
- Supplying and laying including digging, carrying by lorry, filling River Bed Material including watering & consolidation in layers to specified lines, camber, grades and cross sections. Finished work. — Qty: 450 cum
- providing and fixing 100 mm dia PVC pipe for weep holes — Qty: 100 mtr
- Providing , laying, spreading and compacting crushed stone aggregate of 63 mm to 45 mm sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming of 13.2 mm nominal size (Type - A) screening/binding material as stone dust to fill up interstices of coarse aggregate, watering and compacting to the required density, finished work to be measured including all leads, lifts and carriage of material by MT/ H.L. (conforming to clause 404 of MORT&H specifications). — Qty: 161 cum
- Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. — Qty: 82 cum
- Providing and laying tack coat using hot straight run bitumen of grade – VG-30, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. On W.B.M. @ 0.75 Kg/sqm. — Qty: 1072 sqm
- Providing and applying tack coat using hot straight run bitumen of grade – VG-30, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. On bitumen surface @ 0.50 Kg/sqm. — Qty: 247 sqm
- Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge. 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.5% (percentage by weight of total mix) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity — Qty: 66 cum
1 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- TTPS Operation Circle CAD ACWPH Annual Overhaulinlg DG Set III Attending minor repair works, Dismantling and Cleaning of Heat exchanger, DM water tank and Replacement of Coolant — Civil Works & Infrastructure · Tamil Nadu
- Road renovation work on the Fatehpur Minor from km 2.600 to km 5.400 — Civil Works & Infrastructure · Uttar Pradesh
- Constuction of Community Compost Pit at Purkhu Panchayat Kot Lower A Khass Block Bhalwal — Civil Works & Infrastructure · Jammu and Kashmir · ₹36K
- Facility Management Services - LumpSum Based - Anganwadi Centres — Civil Works & Infrastructure · Jharkhand · ₹25.8Cr
- Upgradation of Arjun Mess consisting of following items along with installation — Civil Works & Infrastructure · Telangana
- Warehousing Service - Per MT - Monthly Basis - Rehiring of Godown under modified PWS scheme at revenue district — Civil Works & Infrastructure · Jharkhand
- Hiring of Third-Party Inspection Agency - Construction / Civil Engineering Works — Civil Works & Infrastructure · Assam