Construction of Intake supply channel Sump Pump House delivery tank anchor saddle blocks for rising main including installation testing and commissioning of electro mechanical components LIS Adijin

I and FC Kashmir · Shopian, Jammu and Kashmir · Civil Works & Infrastructure · open

Key facts

Tender value: ₹2.1Cr
EMD: ₹4.1L
Published: 23 Oct 2026
Closing date: 13 Nov 2026
Status: open
Status as of: 04 Nov 2026 05:04 UTC
Department: I and FC
Office: Mechanical Circle Srinagar, Mechanical Division Anantnag

Description

Construction and installation works for the LIS Adijin intake and supply channel, sump and pump house, delivery tank, rising main supports, and associated electro-mechanical equipment. The BOQ includes pumps, steel pipes and fittings, valves, gantries and cranes, control panels, starters, installation, testing and commissioning.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No
Documents required: Third-party inspection certificate from a reputed/registered inspection agency (EIL/CEIL/RITES) for the pumping unit, Third-party inspection certificate from a reputed/registered inspection agency (EIL/CEIL/RITES) for the pipes

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Percentage
Make in India (MII): No
MSE preference: No

Line items (127)

Design, Manufacture, Supply, Installation, Testing & Commissioning of horizontal centrifugal Pumping unit for LIS Adijan. The pumping unit shall have the following specifications:- A. PUMP:- Make = Mather and Platt(M&P)/Kirloskar/Empaneled makes Discharge = 2.5 Cusec Dynamic Head = 57. Mtr. NPSH available = 4.5 Efficiency = ≥75% type of pump = split casing. MATERIAL OF CONSTRUCTION: Impeller = stainless steel ASTMA 351/CF-8M Impeller Nut = Stainless Steel ASTMA 351/CF-8M Casing lines/Wearing Ring= ASTMA 351/CF-8M Impeller Shaft = Stainless Steel AISI 410 Stuffing Box = Cast Iron Gland = Bronze grade V of IS: 318 Fasteners = High tensile Steel Shaft Sleeve = Stainless Steel AISI 410 Pump Casing = Close fine grained Cast Iron conforming to IS:210 grade FG-260 B. MOTOR:- Type = Three phase, squirrel Cage, Electric Induction Motor Make = Kbl/ABB/C.G/Equivalent//Empaneled makes Rating = to be quoted Speed = 1500 (Synchronised). Operating Voltage = 415 + 10 % Volt Frequency = 50 + 3% Hz Clas — Qty: 2 Nos
Providing and fitting of open well submersible pump of 03HP capacity to be used for priming of below mentioned specifications: Motor: 03 HP Outlet: 2” dia. Voltage: 415 Phase: 03 Ph RPM: 2840 The above-mentioned submersible pump shall be fitted on suction side of the pumping unit along with the below mentioned accessories. Providing and fitting of 2” dia. flexible pipe along with 02 no. tightening clamps. - 5 Mtrs. Providing and fitting of 2" dia. GI pipe medium class - 10 Mtrs P/F of 2" Dia GI elbows - 3 No. P/F of 2" Dia GI Tee - 01 No. P/F of 2" dia gate valves, butterfly type. - 4 Nos. P/F of 2" dia MS Flanges - 18 Nos. P/F of 03 HP DOL Starter - 01 No. The job also includes full load testing of the above mentioned equipment. Providing and Testing of priming Sewage submersible pumps (01 No) as standby of 01 HP capacity Kirloskar/ Crompton/ KSB/ Mather Platt/ equivalent make for priming purpose with following specifications: a. Type ------ Sewage submersible b. Head ------ 10 Mtrs. — Qty: 1 Nos
Fabrication, providing, installation and testing of 250mm Nominal Diameter, 6.3mm thick ERW ISI-mark mild steel pipes for suction of 02 nos. pumps as per the following technical specifications: Length of the pipe = Pipe shall be in single random length from 4 to 7 meter as per Clause 12.4 of IS 3589 10804. Type of welding = ERW Quality of MS plate to be used for manufacture = As per IS 2062 Pipe to be manufactured = As per IS 3589 having one longitudinal joint with latest amendments (Grade-Fe410) Hydraulic test pressure = As per 10.1 of IS 3589 End preparation = As per 17.1 of IS 3589 where V-groove is to be made by machine-grinding edges of the pipe Make = Prakash Surya/ Jindal/ SAIL/ Tata/ equivalent. Tolerances = As per clause 12.3 of IS:3589 The pipes shall be fitted with M.S flanges (mentioned below) ,washers, fasteners for end connections and on the foot valve end as per site requirement. The pipes shall be painted with two coats of anticorrosive bitumastic paint. The installatio — Qty: 14 Mtr
Providing and welding of steel plate flanges of 16mm thick on Suction/delivery pipes of 250mm nominal size — Qty: 24 Nos
Fabrication, providing, installation and testing of 200mm Nominal Diameter, 6.3mm thick ERW ISI-mark mild steel pipes for delivery pipes of 02 nos. pumps as per the following technical specifications: Length of the pipe = Pipe shall be in single random length from 4 to 7 meter as per Clause 12.4 of IS 3589 10804 Type of welding = ERW Quality of MS plate to be used for manufacture = As per IS 2062 Pipe to be manufactured = As per IS 3589 having one longitudinal joint with latest amendments (Grade-Fe410) Hydraulic test pressure = As per 10.1 of IS 3589 End preparation = As per 17.1 of IS 3589 where V-groove is to be made by machine-grinding edges of the pipe Make = Prakash Surya/ Jindal/ SAIL/ Tata/ equivalent. Tolerances = As per clause 12.3 of IS:3589 The pipes shall be fitted with welding and flanges for end connections as per the instructions of engineer in charge. The pipes shall be painted with two coats of anticorrosive bitumastic paint. The installation shall be carried out in ac — Qty: 30 Mtr
Fabrication, providing & installation of 250mm dia. Mild steel Flanged bend (as per site requirement) for suction side duly fitted with M.S flanges at both the ends having flange thickness 20mm. The bend shall be fabricated out of 6mm thick M.S plate. The job includes fitting material like nuts/bolts & RI Cloth washer etc & painting in one coat of steel primer and two coats of synthetic enamel of approved shade. — Qty: 2 Jobs
Manufacture, providing, fitting and installation of 250mm dia. Mild steel foot valve. The foot valve shall have to be fabricated out of 6mm thick Mild steel plate. The flanges fitted with the foot valve shall be of 20mm thickness. The thickness of weight plate shall be 12mm and shall be fitted with heavy duty hinge having sufficient foot valve seat dully turned on lathe and fitted with leather washer. The job also includes fabrication, providing and fitting of M.S strainer made out of 12mm sq. bars. The height of the strainer shall be 300mm other specifications of the foot valve are given hereunder:- Material =Mild steel plate Thickness of body = 6mm Thickness of weight plate = 12mm i. Thickness of the flange ... 20mm ii. Inner dia. of the flange... 250mm The foot valve shall be painted with one coat of steel primer The job includes providing and fitting of nuts and bolts and RI cloth washers. — Qty: 2 Jobs
Manufacturing, providing and installation of 250mm dia xmm dia (P.I)and 600mm long eccentric reducer fabricated out of 6.mm thick Mild steel plate duly flanged on both sides. The increaser is to be fitted on the suction side of pumping equipment. The specifications of M.S flange on Reduced and enlarged side of increaser shall be as under: - a). Reduced side flange: - i. Material = Mild steel ii. Nominal dia. = 200 mm iv. Thickness = 20 mm b). Enlarged side flange: - i. Material = Mild steel ii. Nominal dia. = 150mm iv, Thickness = 20 mm The job includes providing and fitting of nuts-and-bolts washers etc. and painting in one coat of steel primer followed by 02 coats of bituminous paint. the dimensions of the reducer depends upon the suction outlet of pump. — Qty: 2 Jobs
Fabrication, providing and installation of slip-on joints 200mm dia. fabricated out of M.S plate 10mm thick duly flanged at both the ends with 24 mm thick M.S flanges. The thickness of the central flanges shall be 28 mm. Packing material involved shall be Jute/ EPDM Rubber. The slip-on joints shall be finished with precision and properly sealed. The job includes fitting and painting of the joint in one coat of steel primer followed by 02 coats of bituminous paint. — Qty: 2 Nos
Supply installation, testing and commissioning of DN 200, PN 1.6 sluice valves generally conforming to IS 14846 with latest amendments or equivalent international standard to following specification: - Material of construction: - a) Body, Bonnet : Ductile iron b) Wedge : Ductile iron c) Spindle/Stem : St Steel as per IS 6603 or ASTMA 276 or IS 1570 d) Stem nut : LTB2 high tensile Brass e) Bonnet Gasket : Neoprene rubber f) Flange drilling : IS 1538 Table 4/ 5. The job also includes providing and fitting of 200 mm dia and nuts and bolts. The job includes testing of same at full load. Make: VAG/ IVC/ KIRLOSKAR/ Talis/ AVK/ equivalent make as approved by the Department Providing/Fitting of Mating flange: The flanges required for fitting of above valve to 200 mm dia delivery pipe shall be inconformity with the flanges of the valve and shall be as per IS 6392 with latest amendments. — Qty: 2 Nos
Supply installation testing and commissioning of Reflux valve 200mm dia ISI marked PN 1.6 generally conforming to manufacturing as per IS-5312 Part-1 of 2004 with latest amendments and flange connections as per IS 1538/BIS 4504. Body: Ductile Iron Bonnet: Ductile Iron Disc: Ductile Iron Plug: Brass Surface Protection: Electro static epoxy powder coating. The job includes fabrication of By-pass arrangement for 200 mm dia NRV as under: - i) Creating holes of 25 mm using gas cutter. ii) Providing and fitting of 25 mm dia steel pipe heavy class of required length along with 02 nos. of elbows iii) Providing and fitting of 01 no. SS ball valve 25 mm of reputed make Make: VAG/ IVC/ KIRLOSKAR/ Talis/ AVK/ equivalent make as approved by the Department Providing/Fitting of Mating flange: The flanges required for fitting of above valve to 200 mm dia delivery pipe shall be inconformity with the flanges of the valve and shall be as per IS 6392 with latest amendments. — Qty: 2 Nos
Fabrication, providing, installation and testing of 250mm Nominal Diameter 6.3 mm thick ERW ISI-mark mild steel pipes for delivery side of 02 nos. pumps as per the following technical specifications: S.No Details Requirement 1 Nominal Diameter = 250 mm 2 Thickness = 6.3 mm 3 Length of the pipe = Pipe shall be in single random length from 4 to 7 meter as per Clause 12.4 of IS 3589 4 Type of welding = ERW 5 Quality of MS plate to be used for manufacture = As per IS 2062 6 Pipe to be manufactured = As per IS 3589 having one longitudinal joint with latest amendments (Grade-Fe410) 7 Hydraulic test pressure = As per 10.1 of IS 3589 8 End preparation = As per 17.1 of IS 3589 where V-groove is to be made by machine-grinding edges of the pipe 9 Make = Prakash Surya/ Jindal/ SAIL/ Tata/ equivalent 10Type of welding to be used for joining pipes = DC arc welding 11 Tolerances = As per clause 12.3 of IS:3589 The pipes shall be fitted with welding and flanges for end connections as per the instructi — Qty: 900 Mtr
Supply installation testing and commissioning of Reflux valve 250mm dia ISI marked PN 1.6 generally conforming to manufacturing as per IS-5312 Part-1 of 2004 with latest amendments and flange connections as per IS 1538/BIS 4504. Body: Ductile Iron Bonnet: Ductile Iron Disc: Ductile Iron Plug: Brass Surface Protection: Electro static epoxy powder coating. Make: VAG/ IVC/ KIRLOSKAR/ Talis/ AVK/ equivalent make as approved by the Department Providing/Fitting of Mating flange: The flanges required for fitting of above valve to 250 mm dia Rising main shall be inconformity with the flanges of the valve and shall be as per IS 6392 with latest amendments. The job includes fabrication of By-pass arrangement as under:- Providing and fitting of 50 mm dia GI/ steelpipe of required length along with 02 No. of elbows of reputed make Providing and fitting of 01 no. steel/brass ball valve 50 mm of reputed make. The by-pass arrangement is to be joined by continuous butt welding in at least 2 runs on ou — Qty: 5 Nos
Fabrication, providing and fitting of 250mm ND mild steel dismantling joint Suitable for working pressure of PN 1.6with longitudinal elongation up to 50mm (having a minimal axialadjustment of 50mm)and nominal length of 260mm fabricated out of MS plate 10mm duly rolled in perfect circular shape and turned to proper size. The specifications are as under: - No.1- Pipe piece: - The number 1 pipe piece with flange on one side and welded in two layers. The welding joint should be smooth, flawless and continuous. No.2-Body piece: - The number 2 body piece 200 mm long shall be flanged on one side and turned on lathe machine to the size of outer dia of pipe piece. NO.3- Retainer flange: - One number retainer flange shall be finished on both sides to accommodate EPDM seal/ RI cloth with body piece making the joint leak proof. The dismantling joint is to be fitted to NRVon one side and to the rising main (by mating flange) on other side. The dismantling joint shall be painted with two coats of Re — Qty: 5 Nos
Manufacturing, providing and installation of 200mm dia x150mm dia(P.O) and 600mm long concentric increaser fabricated out of 6.3mm thick Mild steel plate duly flanged on both sides. The increaser is to be fitted on the suction side of pumping equipment. The specifications of M.S flange on Reduced and enlarged side of increaser shall be as under: - a). Reduced side flange: - i. Material = Mild steel ii. Nominal dia. = 150 mm iv. Thickness = 20 mm b). Enlarged side flange: - i. Material = Mild steel ii. Nominal dia. = 200mm iv, Thickness = 20 mm The job includes providing and fitting of nuts-and-bolts washers etc. and painting in one coat of steel primer followed by 02 coats of bituminous paint. — Qty: 2 Nos
Providing, manufacturing,supplying,testing and fitting 250 mm ND Mild steel pipe expansion joint with longitudinal elongation upto 100mm and nominal length of approximate 1000 mm fabricated out of 10 mm M.S plate duly rolled in perfect circular shape and turned to proper size suitable for PN1.6MPa working pressure,comprising male and female MS sleeves, gland, suitable rubber sealing ring, flanged ends.The job includes providing and fitting of matching MS flanges of nominal dia 250 mm as per IS 6392 (table 17) to the rising main on both ends of joint. The flanged joints shall be made leak proof by way of insertion of rubber insertion cloth of superior quality and of suitable thickness — Qty: 2 Nos
Providing, installation, testing and commissioning of ISI mark PN 1.6 rating 50mm DI double acting air release valve with in-built isolating valve (Type: DS1) conforming to IS 14845 Material Specifications: Body, cover, valve, valve holder, cowl, gland, cap, joint support ring ----- Ductile iron Stem ------- High tensile brass Or Stainless steel Floats ------ Timber core with coating Nuts & Bolts ------ Carbon steel (Preferred make: Sigmaflow/ IVC/ Kirloskar/VAG/ Talis/ equivalent approved by department) Installation: These air release valves are to be fitted to 250mm dia MS rising main by way of flanged end connections and pipe pieces. — Qty: 2 Nos
Fabrication, providing & installation of Delivery manifold (Y-junction) fabricated out of M.S pipe 250x200 mm dia, 6.3 mm thick. The Y-junction shall be of specification as 3000x3000mmx1000mm The job is to be carried as per drawing to be furnished by the department. The job includes providing of the fitting material such as nuts bolts and other consumables required for the job & includes painting with one coat of steel primer and two coats of enamel paint. The job includesTesting on load — Qty: 1 Jobs
Manufacturing, providing and installing of 1 Ton capacity Sump Gantry. The job comprises of the following specifications, process of fabrication and involvement of the material. Vertical supports:-Fabrication, providing, fitting and installation of Gantry Vertical Supports (Two Numbers) to be fabricated out of Mild steel 200 mm dia 6.mm thick pipe having length 4metres The vertical posts shall be provided and welded with Mild Steel plates having 10mm thickness welded at the top. The bottom portion of vertical support shall be welded to working platform. The posts are erected at the two sides of the Sump gantry B) Gantry Beam:- Providing and fitting of Main I beam (Horizontal) of size ISMB-200 having total Span of 4.5 Meters apprx. The beam is fitted with Mild Steel plate of the vertical posts The job includes other consumables required for fixing of plates of the horizontal beam and vertical post plates. Providing and fitting 1 Ton capacity Monorail and 1 Ton Chain pulley block having — Qty: 1 Jobs
abrication, providing and fitting of working platform out of ISMB 200 to be embedded in the foundation block forming a rigid frame structure 4.5m x 1.25 m. ISMB 200: - (4.5x2+1.25x2 m) ISMC 150: - (3x1.25 m) The ISMC-150 shall be welded together through the bracings/stiffeners of ISLC 75x40mm at specific spots The job includes Providing and fitting of M.S. chequered plate 6mm thick to the rectangular ISMB frame of size 4.5mx1.25m with necessary bracings out of ISA 50x50x6. The job also includes the formation of suitable opening at the requisite spots for installation of suction pipes. The job is to carried out as per the instructions of engineer in-charge. The steel work shall be applied with a coat of approved steel primer. The job includes loading/unloading, carriage etc — Qty: 720 Kg

1 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
Construction of Segregation Shed and Community Compost Pit at K.N.Savulur H/O K.Naduhalli — Civil Works & Infrastructure · Tamil Nadu · ₹4.0L
Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L