Construction of (G+2) Office Building at Golaghat APDCL Campus (First Phase) on full turnkey mode

Assam Power Distribution Company Ltd (APDCL) · Golaghat, Assam · Civil Works & Infrastructure · open

Key facts

Tender value: ₹1.2Cr
EMD: ₹3.8L
Published: 31 Oct 2026
Closing date: 16 Nov 2026
Status: open
Status as of: 01 Nov 2026 15:11 UTC
Department: Assam Power Distribution Company Limited
Office: Office of the Chief General Manager (PP&D), APDCL, Bijulee Bhawan, Paltan Bazar, Guwahati

Description

Open turnkey works tender for construction of a G+2 office building at the Golaghat APDCL campus. The work is to be completed within 300 days. EMD is Rs. 3,75,000, with 50% relaxation for eligible ST/SC/OBC bidders. Minimum average annual bidder turnover is Rs. 1.75 crore.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No
Certifications: ST/SC/OBC certificate issued by the competent authority for 50% EMD relaxation, where applicable
Documents required: Audited balance sheets for the last three consecutive financial years, Income tax returns for the last three consecutive financial years, Turnover certificate certified by a registered Chartered Accountant with registration number, Work experience certificates, Relevant work orders and completion certificates, GST registration certificate, Employee Provident Fund registration, Valid Labour License, where applicable, PAN card, Registered or notarized joint venture agreement, where applicable, Registered or notarized power of attorney, Formal authority for signing the tender or company board resolution for authorized signatory, Supporting documents for bidding capacity calculation, Statement of existing commitments and ongoing works countersigned by the Engineer-in-Charge

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Two parts as Techno Commercial bid and Price bid
Evaluation: Techno-commercial bid qualification followed by Price Bid opening
Make in India (MII): No
MSE preference: No

Line items (141)

2 — Qty: 4 5
2 — Qty: 4 5
Annexure-1 — Qty: 1 Jobs
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-incharge. All kinds of soil — Qty: 243 cum
Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary.With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading. — Qty: 294.87 cum
Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). i) In prop 1 cement: 3 sand :6 coarse aggregate by volume — Qty: 81.14 cum
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. — Qty: 15786.81 Kg
Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns — Qty: 467.45 Sqm
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) — Qty: 110.99 cum
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) — Qty: 57.49 cum
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). — Qty: 3.38 cum
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand) — Qty: 66.74 cum
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) — Qty: 105.63 Cum
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). 1:6 (1 cement: 6 fine sand) — Qty: 1559.8 Sqm
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Sal wood — Qty: 0.81 Cum
Providing, fitting and fixing full panelled doors/ windows including oxidised M.S butt hinges (100 mm x 75 mm x 3.55 mm) with necessary screws (other fittings to be measured and paid separately )-I) With Teak wood / Sissu wood. (b) 35 mm thick — Qty: 40.32 Sqm
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions,i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing /paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (F — Qty: 700 Kg
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) — Qty: 80.94 Sqm
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement:4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. Thetiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of requiredthickness, leveling system and rubber mallet for placing the tiles gently and easily. 11.41A.1 Double charge vitrified tile polished finish of size — Qty: 432.63 Sqm
Glazed Vitrified tiles Matt/Antiskid finish of size-11.41A.3.1 Size of Tile 600 x 600 mm — Qty: 56.7 Sqm

2 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
Construction of Segregation Shed and Community Compost Pit at K.N.Savulur H/O K.Naduhalli — Civil Works & Infrastructure · Tamil Nadu · ₹4.0L
Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L