Construction of ECO Cooling Centre at Old Municipal Council Bundi

Municipal Council Bundi · Bundi, Rajasthan · Civil Works & Infrastructure · open

Key facts

Tender value: ₹13.5L
EMD: ₹27K
Published: 13 Oct 2026
Closing date: 28 Oct 2026
Status: open
Status as of: 22 Oct 2026 03:55 UTC
Department: Department of Local Self Government
Office: Office of the Municipal Council, Bundi

Description

Construction of an ECO Cooling Centre at the Old Municipal Council in Bundi, including civil, electrical, solar, cooling, plumbing, furnishing and related works. Estimated cost is Rs. 13.52 lakh. The tender requires an EMD of Rs. 27,040 and tender and processing fees of Rs. 500 each. Bids are submitted online in two envelopes.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No
Documents required: Proof of technical qualification as per the eligibility criteria, Aadhaar card, PAN card, Self-declaration that the agency is not debarred by any department, Self-attested copy of firm/company registration, Demand draft for tender fee, Cash or demand draft for processing fee, Demand draft for earnest money deposit

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Percentage
Make in India (MII): No
MSE preference: No

Line items (45)

Earth work in excavation/ by mechanical means (Hydraulic Excavator) / Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sum on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed: Foundation Excavation — Qty: 43 cum
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:4:8 (1 Cement : 4 fine/ coarse sand : 8 graded stone aggregate 40 mm nominal size). PCC — Qty: 4.5 cum
Centring and shuttering with plywood or steel sheet upto two stories ( each story of height upto 3.5 metre from floor level) including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete. Column Footing Rectangular Portion (Bootom) Rectangular Portion (Pedestal) — Qty: 5 SQM
Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars in footing Thermo-Mechanically Treated bars in Column — Qty: 200 kg
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level : 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) Column Footing Rectangular Portion (Bootom) Trapazoidal Portion Rectangular Portion (Pedestal) — Qty: 3 cum
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). (Below Interlocking pavers) — Qty: 10 cum
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: (Total M.S Work ) — Qty: 2221 Kg
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (S.S Banch) — Qty: 400 kg
25mm wooden planking, tongued and grooved in flooring including fixing with iron screws complete with Second class deodar wood — Qty: 20.35 SQM
Providing and fixing of 60mm thick precast cement concrete interlocking paver block casted with rubber moulds in approved reflective colour and design having minimum compressive strength of 300 kg/ sq cm. The CC paving blocks be laid on average 50mm thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer in-charge. The rates to be inclusive of all lead & Lifts etc. complete as per specifications. Front Back Both Sides — Qty: 45 SQM
Providing and fixing precast cement concrete M-20 grade (Using mechanical Concrete Mixer) kerb stone top and bottom width 115 and 165 mm respectively, 250 mm high on 150 mm thick PCC M-10 grade foundation as per design, including fixing at site as per clause 408 of MoRT&H Specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. — Qty: 30 Mtr
A. 0.5 HP to 1.5 HP (DOL starter) — Qty: 2 Each
B. 0.75 HP Asynchronous motor for Water Sprinkling — Qty: 1 Each
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (2 Tank of 1000 litre Each) — Qty: 2000 Litre
Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 25 mm thick — Qty: 5.2 SQM
Providing and fixing expanded grill made of aluminium as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminium window/vent with required screws, Y and H aluminium sec (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in-charge. Polyester Powder coating aluminium ( minimum thickness of powder coating 50 micron) Front Sides — Qty: 23 SQM
Pure Khas root cooling Panels on Aluminium Grill Front Sides — Qty: 23 SQM
Heat Resisting Wall/roof Panel- Supplying and fixing Complete work (40mm thick) WALL Back Front Sides ROOF STORE — Qty: 82 SQM
Supply, Installation and commissioning of 3kW solar system (complete off-grid solar COMBO) with solar inverter, solar batteries, other solar accessories including all of approved make by MNRE/RRECL — Qty: 1 Each
Hot, Cold and Normal Water Dispenser with Refrigerator 14 litre - Body made of ABS plastic and tank made of Food grade stainless steel. Heavy duty bottle piercer with bottle holder - 15000 — Qty: 1 Each

2 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
imp. Sarvice lane With Nali from Juhi lal colony in Block No 315/4 Block No 317 in ward 84 Zone 3 — Civil Works & Infrastructure · ₹8.3L
GENERAL REPAIR WORK AT JOINT DIRECTOR SECONDARY EDUCATION OFFICE UDAIPUR — Civil Works & Infrastructure · Rajasthan · ₹15.0L
4 NARSAR KARAHIYA SAMPARK MARG SE JUNIOR HIGH SCHOOL TAK PITCH MARG KA LEPAN ANURAKSHAN (SAMANYA MARAMMAT) KARYA.(HOT MIX) — Civil Works & Infrastructure · Uttar Pradesh · ₹15.3L
Laying RMC M40 in various streets of transport nagar ward no. 30 — Civil Works & Infrastructure · Punjab · ₹1.8Cr
Estimate For Laying 315mm Dia UPVC U/G Pipe Line For Outlet RD 13350/R of Shahpurkandi Channel No.3 For Year 2026-27 — Civil Works & Infrastructure · Punjab · ₹51.7L
In Ward-30 Govind Vihar II, work of drain and interlocking tiles from Harendra house to Omendra house and Pravesh house, Sundar house — Civil Works & Infrastructure · ₹19.1L
purani nagar panchayat ke sthan par shoping complex cum office dukan no 05 — Civil Works & Infrastructure · Madhya Pradesh · ₹8.0L