Construction of Community hall at Doon Vihar Jakhan Baapu Naarag Dehradun
Vice Chairman Mussoorie Dehradun Development Authority Dehradun · Dehradun, Uttarakhand · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹16.4L
- EMD: ₹49K
- Published: 18 Sep 2026
- Closing date: 23 Sep 2026
- Status: open
Description
Construction of a community hall at Doon Vihar Jakhan Baapu Naarag Dehradun including earthwork, concrete, brickwork, roofing, electrical, and finishing works as detailed in the tender document.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Open Tender
- Evaluation: Percentage
- Make in India (MII): No
- MSE preference: No
Line items (65)
- Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 Sqm on plan) including getting out and disposal o All Kinds of soil — Qty: 25.65 Cum
- Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. — Qty: 8 Cum
- Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. — Qty: 20.4 Cum
- Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. — Qty: 40 Cum
- Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level. 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) — Qty: 12.54 Cum
- Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All work upto plinth level — Qty: 10.5 Cum
- All work from plinth level upto floor V level. — Qty: 5.5 Cum
- Thermo-Mechanically Treated bars of grade Fe-500D or more. — Qty: 1400 Kg
- Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns etc. for mass concrete. — Qty: 20 Sqm
- Suspended floors, roofs, landings, balconies and access platform. — Qty: 25 Sqm
- Lintels, beams, plinth beams, girders, bressumers and cantilevers — Qty: 120 Sqm
- Columns, Pillars, Piers, Abutments, Posts and Struts — Qty: 20 Sqm
- Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) — Qty: 10.55 Cum
- Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894, in super structure above plinth and upto floor V leve Cement mortar 1 : 4 (1 cement : 4 coarse sand) — Qty: 8.5 Sqm
- Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : — Qty: 9.5 Cum
- 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws — Qty: 6.6 Sqm
- Kiln seasoned and chemically treated hollock wood-30 mm thick shutters — Qty: 3.24 Sqm
- Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm — Qty: 9 Each
- Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300 mm x 10 mm — Qty: 4 Each
- Twin rubber stopper — Qty: 6 Each
1 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- Road renovation work on the Fatehpur Minor from km 2.600 to km 5.400 — Civil Works & Infrastructure · Uttar Pradesh
- Constuction of Community Compost Pit at Purkhu Panchayat Kot Lower A Khass Block Bhalwal — Civil Works & Infrastructure · Jammu and Kashmir · ₹36K
- NAGAR PANCHAYAT NYOTANI UNNAO KE WARD JAVAHAR NAGAR ME SHAUKAT ALI KI DUKAN SE MUNNA KE DUKAN TAK CC ROAD VA NALI NIRMAN KARYA — Civil Works & Infrastructure · Uttar Pradesh
- Proposed compound wall construction at Ganapathy colony Main road NNMP shed in div 122, unit 26, zone-9 — Civil Works & Infrastructure · Tamil Nadu · ₹2.7L
- Repair Works to Radha Krishna HOR at NITW — Civil Works & Infrastructure · Telangana · ₹9.1L
- Prabhag Kr. 24 D , Magalwar, Kasaba Peth Madhe Vividh Thikani Drainage Lines Chambers Durusti Karane — Civil Works & Infrastructure · Maharashtra · ₹8.4L
- Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - GRAM PANCHAYAT DAM — Civil Works & Infrastructure · Bihar · ₹2.0L