Construction of Boundry Wall in Vacant Land of Urbanized Village in Rohini Zone
Delhi Development Authority · Rohini, Delhi · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹1.6Cr
- EMD: ₹3.1L
- Published: 03 Nov 2026
- Closing date: 10 Nov 2026
- Status: open
- Status as of: 07 Nov 2026 23:05 UTC
- Department: Delhi Development Authority
- Office: EE(RPD-5)-Deepali Chowk-Sec-3-Rohini
Description
Construction of a boundary wall around vacant gram sabha land of Khasra No. 48//10 and adjacent khasras in Village Shahbad Daulatpur, Rohini Zone. Estimated cost is Rs. 1,56,69,596, with a completion period of 120 days.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage Rate
- Evaluation: Percentage rate
- Make in India (MII): No
- MSE preference: No
Line items (21)
- 2 — Qty: 3 4
- Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 15 cm measured at a height of 1 m above ground level ,if required , Providing and spraying herbicide such as Amonium Sulfamate on vegetation and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared as directed by Engineer-in-Charge. — Qty: 41293 sqm
- Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift upto1.5 m. All kinds of soil. — Qty: 41293 sqm
- Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. — Qty: 325 cum
- Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. — Qty: 177 cum
- Foundations, footings, bases of columns etc. for mass concrete — Qty: 1271 sqm
- Columns, Pillars, Piers, Abutments, Posts and Struts — Qty: 393 sqm
- Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. — Qty: 19454.4 kg
- Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived fromnatural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) — Qty: 80 cum
- Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). — Qty: 130 cum
- Reinforced cement concrete work in walls (any thickness), including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor two level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) — Qty: 75 cum
- Brick work with C&D bricks(M10 Grade) in superstructure above plinth level up to floor 2 level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) — Qty: 543 cum
- 12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand) — Qty: 2565 sqm
- 15 mm cement plaster on rough side of single or half brick wall of mix:(a)1:6 (1 cement: 6 coarse sand) — Qty: 2565 sqm
- Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. — Qty: 6073 kg
- Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture — Qty: 119 sqm
- Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) — Qty: 5387 sqm
- Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T.reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq. mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) — Qty: 1710 metre
- Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost — Qty: 9 sqm
- Lettering with black Japan paint of approved brand and manufacture — Qty: 1782 per letter per cm height
2 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
- Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
- Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
- CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
- Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
- Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
- P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L