Construction of Boundary Wall at Jhuljhuli Depot land.
Delhi Transport Corporation · Jhuljhuli Depot, Delhi · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹9.0Cr
- EMD: ₹18.0L
- Published: 06 Nov 2026
- Closing date: 20 Nov 2026
- Status: open
- Status as of: 16 Nov 2026 03:16 UTC
- Ministry: Government of NCT of Delhi
- Department: Delhi Transport Corporation
- Office: Headquarters, I.P. Estate, New Delhi
Description
Delhi Transport Corporation invites percentage-rate e-tenders from eligible contractors for construction of a boundary wall at Jhuljhuli Depot land. Estimated cost is Rs. 9,00,14,182, EMD is Rs. 18,00,284, and the completion period is 180 days.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
- Certifications: Valid GST Registration Certificate
- Documents required: Copy of EMD deposited for this work in original in tender cell, DTC, HQ, Self-attested copy of registration certificate as per tender documents, Self-attested copy of valid GST certificate and latest acknowledgement receipt of up-to-date filed return, Self-attested copy of work performance certificate issued by the Executive Engineer/Competent Authority of respective Government department, Copy of Integrity Pact signed by the bidder in the presence of a witness, Self-attested copy of turnover certificate duly certified by Chartered Accountant, Self-attested copy of profit and loss statement duly certified by Chartered Accountant, Self-attested copy of net worth certificate duly certified by Chartered Accountant (Form B-1), Self-attested copy of PAN/TAN Registration Certificate
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage rate e-tender
- Evaluation: Percentage rate
- Make in India (MII): No
- MSE preference: No
Line items (31)
- Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. — Qty: 30400 sq.mtr
- Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. — Qty: 41000 cum
- Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil — Qty: 1750 cum
- Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar — Qty: 500 cum
- Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) — Qty: 10 cum
- Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) cum — Qty: 175 cum
- Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) — Qty: 10 cum
- Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. — Qty: 28200 kg
- Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. — Qty: 18000 kg
- Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plint — Qty: 255 cum
- Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works above plint — Qty: 170 cum
- Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) — Qty: 600 cum
- Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) — Qty: 810 cum
- Foundations, footings, bases of columns, etc. for mass concrete — Qty: 1150 sqm
- Columns, Pillars, Piers, Abutments, Posts and Struts — Qty: 1300 sqm
- Lintels, beams, plinth beams, girders, bressumers and cantilevers — Qty: 1270 sqm
- Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to exposethe stone chippings ,complete as per specification and direction of Engineer-in-charge (payment for providing grooves shall be made separately). — Qty: 7200 sqm
- Extra for using colour in top layer 15 mm cement plaster 1:1/2:2 (1 cement :1/2 coarse sand: 2 stone chipping 10 mm nominal size) in washed stone grit plaster on exterior walls — Qty: 7200 sqm
- Extra for using marble stone chips of required shades instead of stone chips in the top layer in the same proportion in the basic item of washed grit stone plaster as per direction of Engineer-in-charge — Qty: 7200 sqm
- Extra for using white cement in place of ordinary cement in the top layer of the item of washed stone grit plaster. — Qty: 7200 sqm
2 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- Improvement such as widening and strengthening of Lalitgiri Museum to Kalianti Bridge via Haribhaktapur-Jerakanda road from 0/000 km to 7/575 km in the district of Kataka under State Plan — Civil Works & Infrastructure · Odisha · ₹20.6Cr
- Renovation of Dharamshala in New Yadvindra Colony, ward no. 20 at Patiala. — Civil Works & Infrastructure · Punjab · ₹42.2L
- Lining/Relining of water course of Outlet R.D 6000-R of mr. no 4 of Newada Disty Village Talwandi Malik, Khattriwala Distt. Patiala — Civil Works & Infrastructure · Punjab · ₹60.0L
- Outsourcing of Labour Part for Erection, Testing Commissioning of New 11KVLT/HTLines on Rail/PCC Poles, Distribution T/Fs, Augmentation/Sagging of ACSR of HT/LT Lines, Cables laying, Guarding, Stay Setfor Various Works — Civil Works & Infrastructure · Punjab · ₹60.0L
- Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
- Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
- Remodelling and renovation Pond Rara Sahib Chowk Somal kheri Np Maloudh — Civil Works & Infrastructure · Punjab · ₹22.3L