CONSTRUCTION OF BOREWLL, INSTALLATION OF SUBMERSIBLE PUMP AND ASSOCIATED WORKS AT 400 KV SUBSTATION, KHANDUKHAL, SRINAGAR (G)
Power Transmission Corporation of Uttarakhand Limited · Khandukhal, Srinagar, Uttarakhand · Civil Works & Infrastructure · open
Key facts
- EMD: ₹43K
- Published: 31 Oct 2026
- Closing date: 01 Dec 2026
- Status: open
- Status as of: 05 Nov 2026 08:26 UTC
- Department: Power Transmission Corporation of Uttarakhand Limited
- Office: EE 400 KV Srinagar
Description
Construction of a borewell, installation of a submersible pump and associated works at the 400 kV substation, Khandukhal, Srinagar (Garhwal). The work includes hydrogeological survey, borewell drilling and development, pump and electrical equipment installation, pipes, valves, earthing and concrete work.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Item Rate
- Make in India (MII): No
- MSE preference: No
Line items (25)
- Cost of Hydrogeological Survey required for submersible boring work inside the premises of 400kV Substation, Khandukhal, Srinagar Grahwal including the cost of required T&P and Engineer charges. — Qty: 1 Work
- Boring, drilling bore well of required dia for casing/strainer pipe by suitable method prescribed in IS:2800 (Part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. Rocky strata including Boulders: 300 mm dia — Qty: 150 Meter
- Development of tube well in accordance with IS:2800 (Part I) and IS : 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully deveoped, measuring yield of well by "V" notch method or any other apporved method, measuring satic level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. — Qty: 100 Hour
- Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing /casing pipe, removable as per requiement, all complete for bore well of: 200 mm dia — Qty: 1 Each
- Providing and fixing M.S. Clamp of required dia to the top of casing /housing pipe of tubewell as per IS :2800 (Part I), including necessary bolts & nuts of required size complete: 200 mm clamp. — Qty: 2 Each
- Supply and installation 3 phase L&T/ havells make panel board containing contact relay, auto start ammeter, voltmeter, volt selector rotary on off switch lane, kit kat, HRC fuse, start/stop button, push button for volt meter, indicator, connector strip housing lock sheet metal housing for 7.5 to 25 HP pump including supply of all materials, labour and T&P including supply of all materials, labour and T&P etc required for proper completion of the work. — Qty: 1 Each
- Providing & fixing of 7.5 HP, 415V AC three phase submersible pump & motor with a discharge of min. 100-150 LPM on a head 150 meter of KSB/kilosker make as approved by engineer-in-charge including all labour & T&P etc required for proper completion of work. — Qty: 1 Each
- Supply and fixing flat submerisble cable of superior quality as directed by Engineer-in-charge (3.5C x 6.0) sq mm approved make including all material and T&P etc. complete. — Qty: 120 Meter
- Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270 of reputed & approved make, including painted with outside surface with two coats anticorrosive paint of apporved brand and manufacture, including required hire & labour charges, fittings & accessories all complete for all depths as per direction of Engineer in-charge 200 mm nominal size dia having minimum wall thickness 5.40 mm — Qty: 90 Metre
- Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270 of reputed & approved make, including painted with outside surface with two coats anticorrosive paint of apporved brand and manufacture, including required hire & labour charges, fittings & accessories all complete for all depths as per direction of Engineer in-charge 150 mm nominal size dia having minimum wall thickness 5.00 mm — Qty: 24 Metre
- Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats anticorrosive paint of apporved brand and manufacture, including required hire & labour charges, fittings & accessories all complete for all depths as per direction of Engineer in-charge 200 mm nominal size dia — Qty: 12 Metre
- Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats anticorrosive paint of apporved brand and manufacture, including required hire & labour charges, fittings & accessories all complete for all depths as per direction of Engineer in-charge 150 mm nominal size dia — Qty: 24 Metre
- Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer In-charge. — Qty: 30 cum
- Providing & fixing safety pilot wire/steel rope (10 mm) with the submersible pump/motor complete in all respect as per the condition of site & as per the instruction of site incharge. — Qty: 115 Metre
- Making the Pulley system arrangement needed for lifting pump with the help of steel rope (whose one end is always tied with submersible pump) during the mantenance & repairing of work. Complete the work in all respect with required civil, welding, cutting etc. work. The cost of required material, labour and T&Ps are in scope of the contractor. — Qty: 1 Job
- Supplying, connecting (with submersible pump), assembling and lowering in vertical position in bore well HDPE flexible pipes (material grade PE100, IS 4984) 63 mm dia, thickness min. 5 mm, round, black colour including all required fittings complete in all respect as per the condition of site & as per the instruction of site incharge. — Qty: 110 Mtr.
- Providing and fixing gun metal non return valve of apporved quality (Screwed end) : 65 mm nominal bore : Vertical — Qty: 2 Each
- Providing and fixing gun metal non return valve of apporved quality (Screwed end) : 40 mm nominal bore : Horizontal — Qty: 2 Each
- Providing and fixing gun metal gate valve with C.I wheel of approved quality (screwed end) : 40 mm nominal bore. — Qty: 5 Each
- Providing and fixing gun metal gate valve with C.I wheel of approved quality (screwed end) : 65 mm nominal bore. — Qty: 2 Each
1 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
- Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
- Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
- CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
- Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
- Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
- P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L