CONSTRUCTION OF 06 NO 2-BHK RESIDENTIAL QUARTERS, FOR DOCTORS AT SDH SOGAM, KUPWARA
Chief Engineer North Kashmir · Lolab, Jammu and Kashmir · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹4.8Cr
- EMD: ₹9.7L
- Published: 29 Sep 2026
- Closing date: 19 Oct 2026
- Status: open
- Department: PWD
- Office: Kupwara Circle
Description
Construction of six 2-bedroom residential quarters for doctors at SDH Sogam, Kupwara, including civil works, masonry, flooring, roofing, plumbing, and electrical installations as detailed in the tender documents.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Open Tender
- Evaluation: Item Rate
- Make in India (MII): No
- MSE preference: No
Line items (69)
- Dewatering with pumps of adequate HP including Suction Delivery Pipe & DG Sets, Diesel, manpower etc. — Qty: 386.4 Cum
- Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. — Qty: 966 Cum
- Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. — Qty: 386.4 Cum
- Providing and laying hand packed stone soling in foundation ,under floors etc. — Qty: 40.25 Cum
- Providing and laying in position cement concrete of specified grade M-10 including curing but excluding the cost of centering and shuttering - All work upto plinth level with 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) — Qty: 144.07 Cum
- Supply and filling G.S.B. under floors including watering, ramming and consolidating with hand rammer with aggregate size not exceeding 90 mm including cost and carriage of all materials involved upto site of work complete. — Qty: 128.8 Cum
- Filling in with nallah boulders (75mm to 150mm thick) under floor handpacked & rammed including cost and carriage of all materials involved upto site of work complete. — Qty: 431.3 Cum
- Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of work, excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer- in - charge. Note: - Cement content considered in this item is @ 330 kg/ cum. Excess/ less cement used as per design mix is payable/ recoverable separately.upto plinth level. — Qty: 200.75 Cum
- Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer- in - charge. Note: - Cement content considered in this item is @ 330 kg/ cum. Excess/ less cement used as per design mix is payable/ recoverable separately.above plinth level. — Qty: 297.25 Cum
- Reiforcement for R.C.C work including straightening, cutting, bending, placing in position & binding with binding wire all complete, Thermo Mechanically Treated Bars (500 D) (All work at all levels complete). — Qty: 1110.69 qtl
- Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc for mass concrete. — Qty: 387.06 Sqm
- Centering and shuttering including strutting, propping etc. and removal of form for:Lintels, beams, plinth beams, griders, bressumers and cantilevers — Qty: 1009.28 Sqm
- Centering and shuttering including strutting, propping etc. and removal of form for:Columns, pillars piers, abutments, posts and struts — Qty: 817.26 sqm
- Centering and shuttering including strutting, propping etc. and removal of form for:Stairs, (excluding landings) except spiral staircases : — Qty: 57.95 sqm
- Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform — Qty: 729 Sqm
- Providing and laying autoclaved aerated cement blocks masonry with150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. BirlaNu Aerocon AAC Blocks, Magicrete AAC Blocks, Siporex India AAC Blocks or equivalent. — Qty: 241.13 Cum
- providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60±0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Including Single / double glass panes and silicon sealant). Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.50 sqm). Fenesta, Prominance, VEKA, Deceuninck or equivalent. — Qty: 104.07 sqm
- Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealant shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be madeThree track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto1.75 sqm). — Qty: 106.95 Sqm
- 15mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement : 4 fine sand) — Qty: 988.95 Sqm
- 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) in fine sand — Qty: 1805.88 Sqm
1 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- TTPS Operation Circle CAD ACWPH Annual Overhaulinlg DG Set III Attending minor repair works, Dismantling and Cleaning of Heat exchanger, DM water tank and Replacement of Coolant — Civil Works & Infrastructure · Tamil Nadu
- Road renovation work on the Fatehpur Minor from km 2.600 to km 5.400 — Civil Works & Infrastructure · Uttar Pradesh
- Constuction of Community Compost Pit at Purkhu Panchayat Kot Lower A Khass Block Bhalwal — Civil Works & Infrastructure · Jammu and Kashmir · ₹36K
- Facility Management Services - LumpSum Based - Anganwadi Centres — Civil Works & Infrastructure · Jharkhand · ₹25.8Cr
- Upgradation of Arjun Mess consisting of following items along with installation — Civil Works & Infrastructure · Telangana
- Warehousing Service - Per MT - Monthly Basis - Rehiring of Godown under modified PWS scheme at revenue district — Civil Works & Infrastructure · Jharkhand
- Hiring of Third-Party Inspection Agency - Construction / Civil Engineering Works — Civil Works & Infrastructure · Assam