Construction of 02 (Two) nos Small Bore Deep Tube Well with other allied works within the jurisdiction of DWS Sub-Division Kalyanpur under DWS Division Kalyanpur(Gr-II).
Chief Engineer, PWD (DWS) · Kalyanpur, Tripura · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹9.8L
- EMD: ₹20K
- Published: 05 Nov 2026
- Closing date: 11 Nov 2026
- Status: open
- Status as of: 08 Nov 2026 02:36 UTC
- Ministry: Public Works Department
- Department: Drinking Water and Sanitation
- Office: Executive Engineer, DWS Division, Kalyanpur
Description
Construction of two small bore deep tube wells and allied works under the Running Maintenance of RWS scheme during 2026-27, within DWS Sub-Division Kalyanpur under DWS Division Kalyanpur.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
- Documents required: Scanned copy of the Bank Guarantee, if submitted as e-BG or offline BG, Original physical Bank Guarantee, if submitted as offline BG
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage
- Make in India (MII): No
- MSE preference: No
Line items (56)
- Drilling and boring pilot hole in any soil strata by manual means, collection of soil samples of different strata met with during drilling at various suitable levels, preservation of samples in polythene bags/sample boxes and disposal of excess soil or mud, including the cost of for bentonite, water etc, as required to maintain the pilot hole properly as per specification (IS: 2800 (part-I) and direction of the Engineer-in-charge. a) 100 mm dia — Qty: 180 Mtr
- Reaming of pilot hole to an enlarged bore hole in any soil strata by manual means, disposal of excess soil or mud, including the cost of bentonite, water etc, as required to maintain the bore hole properly as per specification and direction of the Engineer-in-charge. i) From 100 mm dia pilot hole to 250 mm bore hole — Qty: 180 Mtr
- Washing and development of tubewell by using hand pump or by any suitable method and testing of the well as per specification and direction of the Engineer-in-charge. — Qty: 145 Mtr
- i) 125 mm dia — Qty: 60 Mtr
- ii) 100 mm dia — Qty: 60 Mtr
- B) 'RS' pipe, i) 100 mm dia, — Qty: 60 Mtr
- Providing and fixing of UPVC reducer suitable for UPVC 'CM' sasing or 'CS' casing or 'RS' pipes as per specification and direction of the Engineer-in-charge. (i) 125x100 mm dia — Qty: 2 Nos
- Providing and fixing of UPVC end cap suitable for UPVC 'CM' casing or 'CS' casing or 'RS' pipes as per specification and direction of the Engineer-in-charge (i) 100 mm dia — Qty: 2 Nos
- (i) Per gravels obtained from Durgapur, West Bengal — Qty: 6.9 Cum
- iii) 125 mm dia — Qty: 2 Nos
- Supplying and fitting fixing of single phase motor set 2HP, head (as per requirement),160 to 220 V, 50hz At Various location in/c. trail run as per specification and direction of the Engineer-in-charge. — Qty: 2 Nos
- Providing and fixing to filter and lowering to proper levels 40 mm G.I. pipe for tube well including cleaning and priming the tube well as per CPWD specification and direction of the Engineer - in - charge. — Qty: 62 Mtr
- Providing and fixing C.I. non-return valve of approved quality as per of CPWD specification and direction of the Engineer - in - charge. i) 50mm dia — Qty: 2 No.
- Labour cost of lowering of 2HP/3HP submersible pump with motor in/c column pipe assembly & transportation charges from workshop/office to site in/c testing — Qty: 2 job
- Supplying and fitting fixing of panel box of MS sheet with locking arrangement suitable for arrangement of all electrical accessories inside the box including service connection within 50.00 mtr length from I.T line with roof for rain water protection and 4 (four) Nos. stant by R.C.C work in all respect as per direction of the Engineer-in-charge. — Qty: 2 Nos
- Supplying and fitting fixing of single phase motor starter panel unit 3.0 HP / 2.0 HP capacity comprise with 2 pole unit conductor, over load rely, capacitors, volt meter, amp meter of BCH/L&T make with necessary copper wire etc. complete as per direction of the Engineer-in-charge — Qty: 2 Job
- Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havells / BCH make etc. complete as per specification and direction of the Engineer-in-charge. 32 Amps. — Qty: 2 Job
- Providing and fitting fixing with PVC insulated 3 core flat Copper cable conforming to relevant IS code for submerssible motor with all necessary equipments and fittings as required as per specification and direction of the Engineer-in-charge. i) 2.5 sq mm — Qty: 96 Mtr
- i) For pipes not exceeding 90 mm dia. — Qty: 525 Mtr
- i) 15 mm dia. nominal bore — Qty: 20 Mtr
2 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
- Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
- Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
- CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
- Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
- Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
- P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L