Comprehensive Maintenance of various roads under Sub-Div-21/South West Road Division-2 PWD, New Delhi during 2026-27. (SH- (a). Raising the height of existing boundary wall along with providing and fixing mesh railing, anticarbonation paint and other
PWD, South West Road Division-2 · New Delhi, Delhi · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹2.5Cr
- EMD: ₹4.9L
- Published: 06 Nov 2026
- Closing date: 17 Nov 2026
- Status: open
- Status as of: 16 Nov 2026 03:17 UTC
- Ministry: Government of NCT of Delhi
- Department: Public Works Department
- Office: Executive Engineer, South West Road-II, PWD (GNCTD)
Description
Road maintenance and associated civil works in New Delhi, including raising a boundary wall and installing mesh railing and anti-carbonation paint near Sagarpur flyovers and the division office on Pankha Road, and securing horticulture work and preventing encroachment with an iron grill along the Pankha Road footpath. Completion period is four months.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
- Certifications: CA certificate with Unique Document Identification Number (UDIN) for average annual financial turnover, Audited and CA-certified balance sheets for the last five years
- Documents required: Receipt for deposition of original EMD and scanned copy of original EMD, Valid contractor registration/enlistment order (for enlisted CPWD contractors), Work experience certificate issued by an officer not below the rank of Executive Engineer or equivalent (Form C and D, for Non-CPWD contractors), Bidding Capacity forms C-1, C-2 and C-3, Affidavits on non-judicial stamp paper of Rs. 100 for Formats F, G, H and I, Undertaking for Site Inspection as per Form K, GST Registration Certificate for the state where the work is to be undertaken, or undertaking to obtain registration, PAN Card, NIT in PDF as uploaded by the Executive Engineer, Bidder details on letterhead, duly signed, Letter of Transmittal as per Form J (where applicable), Certificate of Financial Turnover from CA, Form A (where applicable), Banker's Certificate, Form B, or Net Worth Certificate, Form B-1 (where applicable)
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage Rate
- Evaluation: Percentage rate
- Make in India (MII): No
- MSE preference: No
Line items (21)
- Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. All kinds of soil. — Qty: 1111 each
- Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size). — Qty: 71 Cum
- Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard and M.S. Pipes 40 mm dia and 450mm long with 150x150x6 mm M.S. plate welded at bottom and embedded 150 mm in cement concrete 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6graded stone aggregate 20 mm nominal size), including necessary excavation of size 250x250x450mm deep for the same in bitumen/ concrete pavement at specified spacing. — Qty: 20 each
- Concrete of M10 grade with minimum cement content of 220 kg /cum — Qty: 180 cum
- Concrete of M25 grade with minimum cement content of 300 kg /cum — Qty: 150 cum
- Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.1) Thermo-Mechanically Treated bars of grade Fe-500D or more. — Qty: 700 KG
- Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. 6.1) All works upto plinth — Qty: 10 cum
- Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 7.1) Cement mortar 1:6 (1 cement : 6 coarse sand) — Qty: 127 cum
- Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. — Qty: 5962.5 kg
- Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works — Qty: 45962 Kg
- Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : 10.1) Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. — Qty: 96 Sqm
- Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture — Qty: 3000 Sqm
- Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in-charge (payment for providing grooves shall be made separately). — Qty: 950 sqm
- Forming groove of uniform size from 12x12 mm and upto 25x15 mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. — Qty: 3800 Mtr
- Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 14.1) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) — Qty: 50 cum
- Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar — Qty: 71 cum
- Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. — Qty: 500 cum
- Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 17.1) 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern. — Qty: 1600 sqm
- Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of "L" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge. — Qty: 250 Sqm
- Finishing walls/ concrete surface with anticarbonation coating paint (water based) of required shade and as per manufacturers specification where ever required after cleaninig the surface of dirt, dust, oil, grease , efflorescence including all scaffolding, tools, lifts, machinary etc. and up to all heights complete as per direction of Engineer-in-charge . (a) New work (Two or more coats @ 3.34 litre/ 10 sqm applied to achived Dry Film Thickness (DFT) 200 micron over and including priming coat/ anticarbonation sealer water based applied @ 1.20 litre /10 sqm — Qty: 31640 Sqm
2 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- Improvement such as widening and strengthening of Lalitgiri Museum to Kalianti Bridge via Haribhaktapur-Jerakanda road from 0/000 km to 7/575 km in the district of Kataka under State Plan — Civil Works & Infrastructure · Odisha · ₹20.6Cr
- Renovation of Dharamshala in New Yadvindra Colony, ward no. 20 at Patiala. — Civil Works & Infrastructure · Punjab · ₹42.2L
- Lining/Relining of water course of Outlet R.D 6000-R of mr. no 4 of Newada Disty Village Talwandi Malik, Khattriwala Distt. Patiala — Civil Works & Infrastructure · Punjab · ₹60.0L
- Outsourcing of Labour Part for Erection, Testing Commissioning of New 11KVLT/HTLines on Rail/PCC Poles, Distribution T/Fs, Augmentation/Sagging of ACSR of HT/LT Lines, Cables laying, Guarding, Stay Setfor Various Works — Civil Works & Infrastructure · Punjab · ₹60.0L
- Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
- Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
- Remodelling and renovation Pond Rara Sahib Chowk Somal kheri Np Maloudh — Civil Works & Infrastructure · Punjab · ₹22.3L