Civil upgradation phase III of RCL Plant and Shed S60 at South Site, BARC, Trombay, Mumbai 400085

Bhabha Atomic Research Centre · Mumbai, Maharashtra · Civil Works & Infrastructure · open

Key facts

Tender value: ₹1.2Cr
EMD: ₹2.8L
Published: 19 Oct 2026
Closing date: 12 Nov 2026
Status: open
Status as of: 27 Oct 2026 01:56 UTC
Ministry: Department of Atomic Energy
Department: Bhabha Atomic Research Centre
Office: Hot Lab Utility and Engineering Services Section

Description

Civil upgradation works at the RCL Plant and Shed S60 at the South Site of BARC, Trombay, Mumbai. The item-rate BOQ includes building cladding, structural steel, concrete and repair works, roofing, flooring, doors and associated civil works.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No
Certifications: PAN, GST, EPF, ESIC
Documents required: Financial turnover certified by CA, Profit and loss statement certified by CA, Latest bank solvency certificate, List of construction plants and machinery, List of technical staff, Registration certificate, if any, Certificates of work experience / performance certificates, PAN registration, GST registration certificate, EPF and ESIC registration certificates, Bid Security Declaration form (Annexure 1), Undertaking that eligible similar works have not been executed through another contractor on back-to-back basis, Tender Acceptance letter (Annexure 2), Local Content undertaking for Class I Local Supplier, GST Declaration, ITR Declaration, Annexure A - Statement of Men and Machinery, Completed Similar Works and Projects under Execution sheets

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Item Rate
Make in India (MII): Yes
MSE preference: No

Line items (95)

2 — Qty: 4 5
Aluminium Composite Metal Panel Designing, providing and fixing of 4 mm thick approved make and shade Aluminium Composite Metal Panel of approved make cladding at different locations including soffits of over-hangs but excluding aluminium frame work with grids filled in with weather silicon sealant as per the drawings. The ACM panel composition shall be of 0.5 mm thick PVDF coated aluminium sheet + 3 mm thick low density polyethelene virgin resin core + 0.5 mm thick polyester (PVDF) coated Aluminium sheet all complete as per approved shop drawings and specification (Aluminium frame work will be paid under reelevant item) — Qty: 800 SqM
Aluminium work Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately) Anodi — Qty: 2500 Kg
Extra for colour anodizing — Qty: 2500 Kg
MS hollow tubular sections Providing, supplying, cutting, welding, fabricating, hoisting and fixing in position structural steel members like trusses, purlins, posts etc. using MS hollow / circular / square / rectangular tubular sections including appling a coat of Zinc chromate primer of approved make all as per specifications, drawings and as directed by the Engineer in charge — Qty: 2 MT
Structural Steel Providing Structural steel work using angles, channels, joists, MS plates and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge Up to and including 300 mm Joists, 350 mm channels, MS plates and below sections using materials produced by SAIL / RINL (Vizag Steel) / TATA. All test reports to be provided along with the supply of the materials — Qty: 2.5 MT
M.S Plain Plates and chequrred Plates Providing Structural steel work in M.S Plain Plates and chequrred Plates for Embedded Parts, Trench Covers, Connection plates etc.including cutting, hoisting, fixing in position and applying a priming coat of approved zinc chromate steel primer etc.including cost of structural steel Plates, welding all labour charges etc. complete as per drawings and specifications. Using materials produced by the own plants of SAIL , RINL (Vizag Steel) and TATA only using virgin materials. All test reports to be provided along with the supply of the materials — Qty: 2 MT
Reinforcement Steel Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. Steel supplied by the contractor Using TMT bars of specified grades of all sizes. TMT bars to be supplied by the contractor from the own plants of SAIL, RINL or TATA make only using virgin materials — Qty: 0.5 MT
Shuttering Form work Providing , centering ,shuttering Form work using PVC Film faced plywood to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings and specifications at all levels. For Super structure. — Qty: 30 SqM
Reinforced Cement Concrete (RCC) M-30 Providing and laying in position Reinforced Cement Concrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications up to Plinth Level. — Qty: 10 CuM
PCC 1:1.5:3 Providing and laying in position cement concrete of 1:1.5:3 at all levels (1 cement, 1.5 crushed sand, 3 graded stone aggregate of nominal size 20 mm) including consolidation, finishing, curing etc.. complete as per specifications and drawings but excluding the cost of shuttering, centering and steel reinforcement. — Qty: 5 CuM
Extra for RCC& PCC Using Ready Mix Concrete from outside project area including transporting and pumping from approved batching plants . — Qty: 15 CuM
50 mm thick cement concrete flooring Providing and laying 50 mm thick cement concrete flooring with concrete hardner topping under layer 38 mm thick cement concrete 1:2:4 and top layer 12 mm thick wearing surface with metallic floor hardner, cement being mixed with metallic floor hardner of approved quality and make in the ratio of 4:1 (4 cement and 1 metallic floor hardner) by weight and this cement hardner compound mixed with 6 mm down graded stone aggregate in the ratio of 1:2 by volume including providing and fixing 25 X 3 mm aluminium strip,This includes cost of cement slurry, finishing to the required finishing and cleaning neatly while handing over the areas etc. complete as per specifications and drawings. — Qty: 250 SqM
Brick work Providing and constructing Brickwork in cement mortar 1:4 using crushed sand with Flyash/ Flyash Lime bricks with minimum 70 kg/ sq.cm strength of approved make and size in super structure up to and including Floor II Level including, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings." — Qty: 2 CuM
15 mm thick internal plastering Providing 15 mm thick plastering using Ready mix internal plastering compound of approved make for internal faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site by the Engineer-in-charge — Qty: 300 SqM
Micro concrete Providing SFMC Micro concrete for strengthening of structural members including mixing, pouring, curing as per manufacturer specifications and as directed by the Engineer-in-charge UsingSFMCwith50%Quartz aggregate by weight (Only SFMC consumed alone will be measured for payment — Qty: 5500 Kg
Providing and fixing shear connectors for structural repairing of beam/ Column using following methods; 1.Cleaning the worn out portions of the RCC member with wire brush. 2.Cleaning the reinforcements properly with wire brush and applying a coat of Nitozinc Primer or equivalent to protect the reinforcements. 3.Drilling holes of 12mm dia for fixing shear connectors of 8mm or 10mm dia with Hilti Chemical anchors at a spacing of 150mm c/c includes Cleaning the holes and fixing 8mm or 10mm dia shear connectors make using Epoxy chemical mortar of HILTI HIT RE500/HY200 make or equivalent make to be approved by EIC as required at site and as per instructions of EIC including all machineries, labour, consumables, tools and tackles etc with safety precautions etc. complete. — Qty: 200 Nos
Structural repairs Providing structural repairs in old damaged concrete structures / surfaces with approved Polymer with following operations 1) Removal of loose/Spalled or damaged concrete by chipping and cleaning the concrete surface and reinforcement steel with wire brush and with water 2) Cleaning the re bars with Acetone for complete rust removal and washing with water to make the surface clean. 3) Applying protective coat / bond coat using polymer and cement in the proportion of 1; 1.5 (1 part of polymer and 1.5 parts of cement in synthetic enamal paint like consistancy with brush 4) Reinstate the area with polymer modified mortar in layers of maximum 20 mm with the proportion of Cement 50 Kg : washed and dried river sand 87.50 kg ; silica sand 37.50 Kg. mixed with 10 litres of Polymer (or 1 Kg cement : 1.75 kg washed and dried river sand ; 0.75 Kg silica sand : 200 ml polymer)5) If thickness of repair exceeds 20mm , after every 20 mm thick repair, bond coat as per 2 above to be — Qty: 200 Litre
G.I. chicken mesh Providing and fixing G.I. chicken mesh in the junctions of concrete & brick work / masonry or as directed by the Engineer in charge including cutting, fixing with nails in position before plastering complete all as directed by the Engineer-in-charge. (only area of the chicken mesh used alone will be measured) — Qty: 30 SqM
Pressure Cementitious Grouting Pressure Grouting to existing brick/siporex bat coba waterproofing treatment over RCC slab with fine POLYMER MIXED cementitious grouting materials of approved make with approved method including making holes by drilling, fixing grouting nozzles or grouting port nozzles or grouting packer sizes given below about @ 600 mm c/c in zigzag or approved pattern by using 12 mm Φ x 100 mm long nozzles with drilling upto 25 mm depth in RCC slab; removing the nozzles after completing of grouting job, filling/repairing the holes with polymer modified mortar; curing, arrangement of suitable pumps/tool & tackles, drilling machine ; etc complete as per clause of specifications and as directed by E-I-C. Note: 1). Payment for nozzles will be made in relevent item. 2) Scaffolding will be paid separately under relevant item — Qty: 200 kg

2 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L