CIVIL and ALLIED WORK FOR PRECAST COMPOUND WALL AT MRC (MOBILITY RESEARCH CENTRE) TAKWE BK PUNE-412106 (MAHARASHTRA)
Automotive Research Association of India · Pune, Maharashtra · Civil Works & Infrastructure · open
Key facts
- EMD: ₹18.7L
- Published: 12 Oct 2026
- Closing date: 17 Nov 2026
- Status: open
- Status as of: 08 Nov 2026 22:46 UTC
- Ministry: Ministry of Heavy Industries
- Office: ARAI MRC, Takwe BK
Description
Open item-rate works tender for construction of a precast compound wall and associated civil works at ARAI's Mobility Research Centre in Takwe BK, Pune. Scope includes removal of existing fencing, excavation, concrete and plum wall construction, precast boundary wall installation, barbed wire and concertina fencing, and related structural design, testing and site works. Completion period is 12 calendar months.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
- Documents required: Earnest Money Deposit, Pre-qualification documents, Power of Attorney to sign all documents, Signed and sealed tender acceptance letter, GST registration details, Technical bid and completed tender forms, Financial bid / Bill of Quantities
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Item rate
- Make in India (MII): No
- MSE preference: No
Line items (32)
- Removal of Barbed wire Fencing with RCC pole - Removal of existing barbed wire fencing along with vertical RCC Pole & its inclined support by manual or mechanical means which was fixed in concrete below ground of approx. size 450X450X600mm, including removing all existing barbed wires , shifting loading, unloading and stacking of RCC posts and removed barbed wire in bundle within a premises up to 1500 mt, or any location as instructed by engineer in charge in the premises, item also inclusive of cleaning the site for next item as required. Approximate 7 rows are to be removed with corss wire. ( Mode of measurements- Plan area of existing compound fencing) — Qty: 3500 Rmt
- Excavation in All kinds of Soil, soft & hard murum & Ordinary rock up to 1.5 mt in depth from ground for foundations and trenches with Pits for plum wall, RCC wall, raft, vertical post etc. by any mechanical/ manual means (Hydraulic excavator) over areas along the boundary wall line, including dewatering, levelling the base of foundation, getting out the excavated soil, and then inclusive of refilling the excavated approved soil/ murum as required in layers not exceeding 20 cm in depth including consolidating, watering each deposited layer by ramming, to achieve with 95% proctor density with 10 T roller, etc. and disposing of surplus excavated soil as directed, lead up to 1000 m within the plot. etc. complete. — Qty: 2100 Cum
- Excavation in All kinds of Soil, soft & hard murum & Ordinary rock from 1.5-3 mt in depth from ground for foundations and trenches with Pits for plum wall, RCC wall, raft, vertical post etc. by any mechanical/ manual means (Hydraulic excavator) over areas along the boundary wall line, including dewatering, levelling the base of foundation, getting out the excavated soil, and then inclusive of refilling the excavated approved soil/ murum as required in layers not exceeding 20 cm in depth including consolidating, watering each deposited layer by ramming, to achieve with 95% proctor density with 10 T roller, etc. and disposing of surplus excavated soil as directed, lead up to 1000 m within the plot. etc. complete. — Qty: 930 Cum
- Excavation in hard rock without blasting up to 0 to 1.5 mt in depth from ground for foundations and trenches with Pits for plum wall, RCC wall, raft, vertical post etc. by any mechanical/ manual means (Hydraulic excavator) over areas along the boundary wall line, including dewatering levelling the base of foundation, getting out the excavated rock/soil, and then inclusive of refilling the excavated approved soil/ murum/ rock as required in layers not exceeding 20 cm in depth including consolidating, watering each deposited layer by ramming, to achieve with 95% proctor density with 10 T roller, etc. and disposing of surplus excavated soil as directed, lead up to 1000 m within the plot. etc. complete. — Qty: 2000 Cum
- Providing and laying in position Cement Concrete of specified grade including the cost of centering and shuttering, propping etc. and removal of formwork for : - All work up to ground level in 1:2:4-M 15 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) below raft foundation, footing, plum wall, RCC wall, incasing for pipe, mass concrete, etc. with curing etc complete as directed by EIC. — Qty: 645 Cum
- Providing and laying in position , Plum Concrete wall with contrctors plum / Stone as plinth wall or retaining wall, along plot boundary, 450mm above and avg 1350 mm below ground for precast compound base wall as per drawing, depending upon local ground conditions up an downs, including fixing and removing of formwork, including required staging, using approximately 60% stones and 40% Concrete, including layer wise placing of approved hard stones as rubble of max 200 mm size and placing of Concrete of grade M15, over and in between the stones , by manual ways or through concrete mechanical pump/ booms to cover all stone faces, including vibrating etc. to achieve compacted homogeneous mass without any pockets or honey combs, including placing horizontal header stones of required length to cover 90% of wall width at every 2.5m cross centres and vertical keys of stones of minimum 300mm length, at every 900 c/c , including placing of pvc pipes as weep holes as required by design ( cost of — Qty: 1525 Cu.m
- Plum Concrete wall with all specifications same as Item no. 6 above but using stones available at site, including sorting of available boulders of different sizes and types as required for plum wall construction, breaking of oversized boulders into smaller pieces to required dimensions by manual means or mechanical methods, loading, unloading, and internal transportation of boulders and broken stones, stacking, placing, and arranging the boulders neatly at the specified location for plum wall work, all leads, lifts, handling, incidental charges, labour, tools and tackles required to complete the work, work to be carried out complete in all respects as per site conditions, specifications, drawings (if any), and directions of the Engineer‑in‑Charge, nothing extra shall be paid for any difficulty due to site conditions, hardness of boulders, multiple handling, or restricted working area. — Qty: 2290 Cu.m
- Providing and fixing A) RCC Precast Boundary Wall & concrete post (The Precast RCC poles shall be grouted in rich concrete not lesser that min M25 grade and 900mm inside the plum wall) including virgin reinforcement as per reccomaded brands of High tensile struds, High tensile wires as per design requirment with total height of 1.8 m from plinth level and 75 mm thick, with ARAI name embossing on panel from one side as shown in drawing. Contractor need to consider additional post at every expansion joint & at every corner, at every level difference need to check the actual dimension for panel and cast accordingly as per site requirment. (Precast panels, concrete postof M25 Grade Min, inserts etc. ),This item includes B) Providing & fixing Y shape 50X50X6mm angle with welding & making provision of hole for fixing wire on Precast wall coloum, with one coat of primer and two coat PU paint, fixing the 12 swg. 2 ply 4 forks hot dipped G.I.Barbed wire with necessary G.I. U Nails with zinc coa — Qty: 3150 Rmt
- Providing and fixing RCC Precast Boundary Wall & concrete post with all specification same as above with total height of 1.8 m and 100 mm thick -QRO — Qty: 10 Rmt
- Providing and fixing A) RCC Decorative Precast Boundary Wall & concrete post including virgin reinforcement as per reccomaded brands of High tensile struds, High tensile wires as per design requirment with total height of 1.8 m from plinth level and 75 mm thick, with ARAI name embossing on panel from one side as shown in drawing. Contractor need to consider double post at every expansion joint & at every corner need to check the actual dimension for panel and cast accordingly as per site requirment. (Precast panels, concrete postof M25 Grade Min, inserts etc. ),This item includes B) Providing & fixing Y shape 50X50X6mm angle with welding & making provision of hole for fixing wire on Precast wall coloum, with one coat of primer and two coat PU paint, fixing the 12 swg. 2 ply 4 forks hot dipped G.I.Barbed wire with necessary G.I. U Nails with zinc coating 30 to 40 gr./Sq.m, weighing 9.38 kg per 100 m (minimum). C)Providing & fixing 600 mm dia. concertina coil with stainless steel clippin — Qty: 165 Rmt
- Providing and laying in position Concrete for Reinforced Concrete work , manufactured by machine batched, machine mixed and machine vibrated at site and /or Ready mixed concrete manufactured in fully automatic batching plant having continuous agitated mixer, and transported to site of work , in transit mixer, including pumping of concrete to desired location, design mix cement concrete of specified grade, using natural sand and /or crushed sand of approved quality ,including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability, including use of reactive fly ash / cementitious materials, of approved grade as per the provisions of relevant I.S. Codes and as approved by the Engineer- in- Charge ,including the cost of water tight cantering, shuttering propping , staging etc., finishing at all levels including grinding of joints to achieve level surfaces . M-25grade reinforced — Qty: 315 Cu.m
- Providing and laying in position M 20 concrete Concrete for Reinforced Concrete work with all specification same as above. — Qty: 45 Cu.m
- Providing placing and tying in position, TMT virgin Reinforcement for R.C.C. work of various dia. including straightening, cutting, bending, binding wire , placing in position and binding, Third party Testing costs , Wastage costs ,etc. All complete, up to ground level and above ground level at all heights. Reinforcement used in structure shall be free of rust. Thermo-Mechanically Treated bars of FE 500 grade . — Qty: 33 MT
- Providing & fixing in position holding down bolts / Foundation bolts (GRADE EN 8) in concrete of various diameters ranging from 12mm. to 25 mm. including nuts, washers, sleeves, approx. length upto 0.8 mtr. etc. as per drawings including supply and fixing templates, supports, setting out etc. complete as specified and directed (templates and supports will not be measured and paid separately. Only one sample of template will be provided by ARAI). — Qty: 1200 KG
- Supply of ISI-marked Full Round HDPE PN6 pipe of 63 mm diameter as per approved make , including transportation from store/site depot to the work location, loading, unloading, handling. — Qty: 200 Rmt
- Providing, fabricating, erecting, aligning, in required position, miscellaneous items of virgin structural steel using mild steel , such as angles, channels with hold fasts, various sizes Insert plates with Hold fasts, ISMC section for MS gate support, square & rectangular tubes, round pipes, sq. Bar, anchor fastener, m.s. hinges, m.s. aldrop, wheels, lock patti etc, as directed by the engineer. including cutting, grinding, welding, painting with zinc primer and two coats synthetic enamel paint of approved colour, cleaning etc. complete, including any shop drawing if so required. — Qty: 12.5 MT
- Providing and fixing Pre coated Galvalume Cladding Sheet : Providing and fixing precoated galvalume profile sheets (size, shape and pitch of corrugation as approved by EIC). 0.50mm +/- 5% total coated thickness (TCT). Zinc coating 120gsm as per IS 277 in 240mpa steel grade, 5-7 micron epoxy primer on both sides of the sheets and polyster top coat 15-18 micron of approved shade. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length of 3 mtr or as desired by EIC. The sheets shall be fixed using self drilling of self tapping screws of size 5.5 X 55 mm with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm dia. with bitumen and GI limpet washers or with GI limpet washer filled with white lead complete including cutting to size and shape wherever required including overlaps at all locations as required as per IS specification including any scaffolding, loading and unloading, leakproofing — Qty: 1200 Sq.m
- Rock anchoring - Making Drilling 65 mm dia holes in any type of hard rock /strata 500mm to 900mm deep with inserting 20mm dia reinforcement bar as per drawing (reinforcement bar will be paid separately in item no 10) including providing & laying Non-Shrink Grout ( Sika /approved Make) at all depths for rock anchor bars, etc. including cleaning/removing all dust from drilled hole before placing bar, laying, finishing the surfaces smooth, curing, including all material, labour cost and machinery charges, etc. complete as specified and directed. Including Pull test as per requirement by RCC Consultant. — Qty: 100 Each
- Chain-link Fencing Work of 2m height - Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm made of G.I. wire of dia 4 mm complete .Scope includes supply, align, fabricate, erect, paint to structural steel frames of single section , plates, insert plate, , angles etc at designated heights shown in the drawings including cutting, bending, drilling holes, etc. complete, fixing 6 mm bar to vertical and horizontal member, drilling holes in angle for fixing chainlink fencing, applying one coat of zinc primer & two coats of approved shade of PU paint, scaffoldings, tools and tackles, loading & unloading of material, wastage, cranes etc, completed as directed by engineer In charge. Welding electrodes, consumables will not be paid separately. Rates inclusive of necessary tests of material, welds, fasteners etc. as per relevant Indian standards. Work at height up to & above 2 meters complete as per the direction of Engineer-in-charge. and as per drawing. — Qty: 1685 Rmt
- 600 mm dia — Qty: 3 Rmt
3 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- Improvement such as widening and strengthening of Lalitgiri Museum to Kalianti Bridge via Haribhaktapur-Jerakanda road from 0/000 km to 7/575 km in the district of Kataka under State Plan — Civil Works & Infrastructure · Odisha · ₹20.6Cr
- Renovation of Dharamshala in New Yadvindra Colony, ward no. 20 at Patiala. — Civil Works & Infrastructure · Punjab · ₹42.2L
- Lining/Relining of water course of Outlet R.D 6000-R of mr. no 4 of Newada Disty Village Talwandi Malik, Khattriwala Distt. Patiala — Civil Works & Infrastructure · Punjab · ₹60.0L
- Outsourcing of Labour Part for Erection, Testing Commissioning of New 11KVLT/HTLines on Rail/PCC Poles, Distribution T/Fs, Augmentation/Sagging of ACSR of HT/LT Lines, Cables laying, Guarding, Stay Setfor Various Works — Civil Works & Infrastructure · Punjab · ₹60.0L
- Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
- Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
- Remodelling and renovation Pond Rara Sahib Chowk Somal kheri Np Maloudh — Civil Works & Infrastructure · Punjab · ₹22.3L