Arrangement of 20M span ISMB supported conveyor Belt System for IDOL immersion at Saral Dighi in ward No. 33 of Rajpur Sonarpur Municipality including Civil and Electro Mechanical Work
URBAN LOCAL BODIES · Harinaravi, West Bengal · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹1.1Cr
- EMD: ₹2.1L
- Published: 07 Oct 2026
- Closing date: 28 Oct 2026
- Status: open
- Status as of: 10 Oct 2026 07:24 UTC
- Department: MUNICIPAL AFFAIRS DEPARTMENT
- Office: RAJPUR SONARPUR
Description
Tender for civil and electro-mechanical work to arrange a 20-meter span conveyor belt system for IDOL immersion at Saral Dighi, Rajpur Sonarpur, including excavation, flooring, concrete work, steel reinforcement, structural steel, sheet piles, and E&M works.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage
- Make in India (MII): No
- MSE preference: No
Line items (15)
- Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. — Qty: 138 M3
- Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. — Qty: 21 M3
- Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks. — Qty: 85 Sq m
- 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources. — Qty: 13 Sq m
- Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. — Qty: 152 Sqm
- Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /PortIand Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. a) Concrete of M35 grade with minimum cement content of 370 kg /cum. — Qty: 26 Cu-mtr.
- Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. — Qty: 3062 Kg
- Structural steel work riveted, bolted or welded in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. — Qty: 8.49 MT
- Holding down bolt with nut including 100 x 100 x 6 mm plate washer at bottom fitted complete and packing the hole with cement concrete or cement grout as directed. a) 32 mm dia: i) 750 mm long. — Qty: 88 Each
- Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. A) On steel work. — Qty: 102 Sqm
- Supply for Steel sheet piles for Cold Rolled 690X390X10 "Z" type & 12m L including transportation at site. — Qty: 6.9 MT
- Supply for Steel sheet piles for Cold Rolled 690X390X10 "Z" type & 12m L including transportation at site. — Qty: 6.33 M.T
- Cost of E&M Works for of 20m Truss Supported Conveyor Belt — Qty: 1 Job
- G.S.T & L.W.C. Correction factor @0.973 — Qty: 10060658.27 Nos
- Cost Index @23% — Qty: 12746778.77 Nos
1 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- imp. Sarvice lane With Nali from Juhi lal colony in Block No 315/4 Block No 317 in ward 84 Zone 3 — Civil Works & Infrastructure · ₹8.3L
- GENERAL REPAIR WORK AT JOINT DIRECTOR SECONDARY EDUCATION OFFICE UDAIPUR — Civil Works & Infrastructure · Rajasthan · ₹15.0L
- 4 NARSAR KARAHIYA SAMPARK MARG SE JUNIOR HIGH SCHOOL TAK PITCH MARG KA LEPAN ANURAKSHAN (SAMANYA MARAMMAT) KARYA.(HOT MIX) — Civil Works & Infrastructure · Uttar Pradesh · ₹15.3L
- Laying RMC M40 in various streets of transport nagar ward no. 30 — Civil Works & Infrastructure · Punjab · ₹1.8Cr
- Estimate For Laying 315mm Dia UPVC U/G Pipe Line For Outlet RD 13350/R of Shahpurkandi Channel No.3 For Year 2026-27 — Civil Works & Infrastructure · Punjab · ₹51.7L
- In Ward-30 Govind Vihar II, work of drain and interlocking tiles from Harendra house to Omendra house and Pravesh house, Sundar house — Civil Works & Infrastructure · ₹19.1L
- purani nagar panchayat ke sthan par shoping complex cum office dukan no 05 — Civil Works & Infrastructure · Madhya Pradesh · ₹8.0L