ARMO Electrical works at FSD Egmore for FY2026-27 - Wiring for UPS connection to computers in Depot office, replacing the existing old/damaged UG cables with new UG cables, replacement of non functional light fittings with LED light fittings

Food Corporation of India · Egmore, Chennai, Tamil Nadu · Electrical Equipment & Supplies · open

Key facts

Tender value: ₹6.8L
EMD: ₹14K
Published: 28 Oct 2026
Closing date: 09 Nov 2026
Status: open
Status as of: 03 Nov 2026 04:43 UTC
Ministry: Ministry of Consumer Affairs, Food and Public Distribution
Department: Food Corporation of India, Tamil Nadu Region
Office: Regional Office, Chennai, EM Engineering Division

Description

Annual repair and maintenance electrical works at FSD Egmore, including UPS wiring for depot office computers, replacement of damaged underground cables and non-functional light fittings, and allied works. Completion period is 45 days.

Eligibility & requirements

Past performance: 40%
Startup relaxation: No
MSE relaxation: No
Certifications: Valid Electrical Contractor license issued by the State Licensing Board
Documents required: Original payment instrument for tender document cost and Earnest Money Deposit, Valid registration certificate of appropriate value from an eligible organization, Partnership registration certificate, company incorporation certificate, or proprietary firm affidavit, as applicable, with power of attorney and other required documents, Experience/work completion certificates meeting the tender notice requirements, Signed Tender Acceptance Letter on firm/company letterhead, PAN Card, Goods and Service Tax registration certificate, Financial turnover certificate for the previous three years issued by a Chartered Accountant, Valid Electrical Contractor license issued by the State Licensing Board

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Percentage rate
Evaluation: Percentage rate
Make in India (MII): No
MSE preference: No

Line items (41)

2 — Qty: 3 4
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group B — Qty: 3 Point
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire — Qty: 25 Mtr
2 X 4 sq. mm + 1 X 4 sq. mm earth wire — Qty: 35 Mtr
Supplying and fixing 9 module PVC modular box on wall surface along with suitable modular base & cover plate including fixing 3 Nos. 5/6 A modular switches and 3 Nos. 5/6 A modular socket outlets and including connections etc. as required. — Qty: 2 Each
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. — Qty: 1 Each
Brush Less Direct Current (BLDC) Fan without Remote Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) — Qty: 7 Each
Supplying, fixing, testing and commissioning of 1200 mm 20W LED T8 tube with extruded Al body, PC diffuser and inbuilt driver with efficacy of 100 lumens/W by replacing damaged spares of the existing fitting etc . as required (ISI certified) — Qty: 10 Each
Supplying, installation, Testing and commissioning of 70watt LED type Well Glass Light in pressure die-cast Aluminium housing and fixing on truss with suitable clamps, nut and bolts including connection, testing etc., as required. (ISI certified)..(Rating IP66, Luminar efficacy>120Lm/W, CRI>75) — Qty: 6 Each
Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMIEMC As per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),SDCM (Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixtur — Qty: 19 Each
Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR -15, lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shal — Qty: 1 Each
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator) 8 way, Double door — Qty: 1 Each
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 4 way (4 + 12), Double door — Qty: 1 Each
Supplying and fixing DP sheet steel enclosure on surface/ recess suitable for DP MCB complete etc. as required. — Qty: 1 Each
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A — Qty: 1 Each
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole — Qty: 2 Each
Double pole — Qty: 6 Each
Triple pole — Qty: 1 Each
Supplying of PVC insulated, PVC sheathed / XLPE aluminium conductor armoured under ground power cable of 1.1 KV grade conforming to IS 1554 part-I/7098(part-I) 1998 with up to date amendments of the following sizes. 3 x 6 sq mm — Qty: 70 Mtr
3 x 10 sq mm — Qty: 80 Mtr

3 tender document(s) available — sign up to download.

Related tenders

SUPPLY OF V.F TRANSFORMER OF RATIO 470:600 OHMS (CYLINDER TYPE) — Electrical Equipment & Supplies · Madhya Pradesh
Handheld Rechargeable Pocket Torch — Electrical Equipment & Supplies · Madhya Pradesh
Procurement of Digital Dial Indicator and Stainless Steel Flexible Magnetic Base stand — Electrical Equipment & Supplies
Erection of lighting line for mine lighting purpose at R-VI seam and various places coal depot, DDU, Agent office at Khottadih OCP — Electrical Equipment & Supplies · West Bengal · ₹9.9L
Procurement of Electrical instruments/Equipments and machinery for Electrical, Repairing, Fabrication and other electrical works at Gumgaon Mine — Electrical Equipment & Supplies · Maharashtra · ₹1.9L
Work of re-organisation of generator line in different rooms of Bankola Area offiece. — Electrical Equipment & Supplies · West Bengal · ₹1.5L
Diversion of 6.6KV O/H Line at Jharna Face due to increase in water level and widening of Haul Road for feeding power to 4000GPM Motor Pump in SOCP Muraidih AMP Colliery. — Electrical Equipment & Supplies · Jharkhand · ₹1.2L
Installation of earth pits at different substations of Jambad Colliery — Electrical Equipment & Supplies · West Bengal · ₹5.1L