ARC for Various fabrication, machining works required during routine/preventive/ breakdown maintenance of various auxiliaries/equipment of TG Area of 210MW, Unit-6, PTPS, Panipat
HPGCL · Panipat, Haryana · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹3.8L
- EMD: ₹8K
- Published: 25 Sep 2026
- Closing date: 21 Oct 2026
- Status: open
- Department: Haryana Board Corporation
- Office: PTPS Panipat
Description
Tender for machining, drilling, cutting, material build-up, run out check, and fabrication works for auxiliaries/equipment maintenance at PTPS Panipat for a period of two years.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Open Tender
- Make in India (MII): No
- MSE preference: No
Line items (41)
- Machining/ size making of OD/ ID of impeller wear ring/ neck ring — Qty: 2 nos
- Machining/ size making of OD/ ID of impeller wear ring/ neck ring — Qty: 2 nos
- Machining/ size making of OD/ ID of impeller wear ring/ neck ring — Qty: 2 nos
- Drilling/ size making of ID (bore size) of coupling hubs (two halves) — Qty: 2 nos
- Drilling/ size making of ID (bore size) of coupling hubs (two halves) — Qty: 2 nos
- Drilling/ size making of ID (bore size) of coupling hubs (two halves) — Qty: 2 nos
- Drilling/ size making of ID (bore size) of coupling hubs (two halves) — Qty: 2 nos
- Drilling/ size making of ID (bore size) of coupling hubs (two halves) — Qty: 1 nos
- Cutting/ machining/ size making of sleeve/ bush etc. OD size — Qty: 2 nos
- Cutting/ machining/ size making of sleeve/ bush etc. OD size — Qty: 2 nos
- Cutting/ machining/ size making of sleeve/ bush etc. OD size — Qty: 2 nos
- Cutting/ machining/ size making of sleeve/ bush etc. OD size — Qty: 2 nos
- Cutting/ machining/ size making of sleeve/ bush etc. OD size — Qty: 2 nos
- Cutting/ machining/ size making of sleeve/ bush etc. OD size — Qty: 2 nos
- Material build up through welding, machining/ size making of shaft, OD size — Qty: 1 nos
- Material build up through welding, machining/ size making of shaft, OD size — Qty: 1 nos
- Material build up through welding, machining/ size making of shaft, OD size — Qty: 1 nos
- Material build up through welding, machining/ size making of shaft, OD size — Qty: 1 nos
- Material build up through welding, machining/ size making of shaft, OD size — Qty: 1 nos
- Material build up through welding, machining/ size making of shaft, OD size — Qty: 1 nos
1 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- TTPS Operation Circle CAD ACWPH Annual Overhaulinlg DG Set III Attending minor repair works, Dismantling and Cleaning of Heat exchanger, DM water tank and Replacement of Coolant — Civil Works & Infrastructure · Tamil Nadu
- Road renovation work on the Fatehpur Minor from km 2.600 to km 5.400 — Civil Works & Infrastructure · Uttar Pradesh
- Constuction of Community Compost Pit at Purkhu Panchayat Kot Lower A Khass Block Bhalwal — Civil Works & Infrastructure · Jammu and Kashmir · ₹36K
- Facility Management Services - LumpSum Based - Anganwadi Centres — Civil Works & Infrastructure · Jharkhand · ₹25.8Cr
- Upgradation of Arjun Mess consisting of following items along with installation — Civil Works & Infrastructure · Telangana
- Warehousing Service - Per MT - Monthly Basis - Rehiring of Godown under modified PWS scheme at revenue district — Civil Works & Infrastructure · Jharkhand
- Hiring of Third-Party Inspection Agency - Construction / Civil Engineering Works — Civil Works & Infrastructure · Assam