AR AND SR TO RB TYPE-4J, UNDER MTC. BOOTH SECTOR-5, CHANDIGARH (H.NO.51, 55 AND OTHERS)
Chandigarh Administration · Chandigarh, Chandigarh · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹15.1L
- EMD: ₹30K
- Published: 18 Sep 2026
- Closing date: 25 Sep 2026
- Status: open
- Department: Engineering
- Office: Construction Circle - II
Description
Tender for civil works including dismantling, tiling, brick work, painting, polishing, carpentry, disposal of debris, and related civil construction activities in Sector 5, Chandigarh.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage
- Make in India (MII): No
- MSE preference: No
Line items (18)
- Dismantling of ceramic tiles or vitrified and plaster to making the surface clean for refixing the glazed tiles including removing of malba complete in all respect — Qty: 135.38 Sqm
- Providing and laying Vitrified tiles in floor in different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. — Qty: 96.78 Sqm
- Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement :4 coarse sand) — Qty: 2.57 Cum
- Providing and laying antiskid ceramic floor tiles of specified size of 1st quality with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc. — Qty: 13.94 sqm
- Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622, of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. — Qty: 37.8 sqm
- Distempering with 1st quality acrylic distemper, having VOC content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat — Qty: 469.75 sqm
- Wall painting with premium acrylic emulsion paint of interior grade, having VOC content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. One coats — Qty: 2630.84 Sqm
- Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work — Qty: 1006.74 sqm
- Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. Old work (one or more coats applied @ 0.83 ltr/10 sqm). — Qty: 2901.86 sqm
- Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. — Qty: 720.58 sqm
- Providing and applying filling with cement based putty (Birla, Jk or equivalent) to the required finish complete in all respect and to the entire satisfaction of Engineer-in-charge. — Qty: 720.58 sqm
- French spirit polishing : One or more coats on old work — Qty: 1006.74 sqm
- Providing and fixing 2'-0” deep cupboard /cabinet consisting of 19mm thick commercial board and 6mm thick ply on back side, 4mm thick teak ply pasted on the exposed surface and making shelves in cabinet 0.8mm mica inside canbinet . The rate further includes the cost of lipping, piano hinges, cupboard lock, screws, nails, 2 nos. fancy s.s. handles, 2 nos. magnetic catchers, fevicol and painting two coats over one priming coat and preparation of surface on board and ply surface and spirit polishing on teak ply complete in position as per entire satisfaction of Engineer-in-charge. — Qty: 32.7 sqm
- Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved — Qty: 6.56 cum
- 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) — Qty: 32.7 sqm
- Providing and fixing 2nd class teak wood (kiln seasoned) chowkhat 4 1/2" x 2 1/4"including cost of corner straps, iron hold fasts, hinges, screws,nails, fevicol etc. and spirit polish of chowkhats. Rate includes the cost of dismantling of all damaged chowkhats and making good the damage to walls plaster and floors as required including, disposal of rubbish to the dumping ground the rate further includes the cost of two coats Spirit polish complete in all respect and to the entire satisfaction of Engineer-in-Charge — Qty: 25.15 Rmt
- Providing and Fixing 35mm thick 2nd class teak wood (kiln seasoned) panel door shutter consisting of 100mm x 35 mm style and top rail 150 mm x 35 mm lock rail 200mm x 35 mm bottom rail, teak wood (kiln seasoned) beading, with necessary 3 Nos. of hinges, S.S. Tower bolts, S.S. Handles 5”, sliding bolt and complete fixed in position including melamine polish complete in all respect to the entire satisfaction of Engineer-in-Charge — Qty: 11.02 Sqm
- Providing and Fixing 35mm thick 2nd class teak wood (kiln seasoned) wire gauge door shutter consisting of 100mm x 35 mm style and top rail 150 mm x 35 mm lock rail 200mm x 35 mm bottom rail wire mesh 22 x 12 mm gauge fixed with 1/2” x 3/4” teak wood (kiln seasoned) beading, incluuding Stainless Steel fittings and french spirit polish, complete fixed in position and in all respect to the entire satisfaction of Engineer-in-Charge. — Qty: 3.68 Sqm
1 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- NAGAR PANCHAYAT NYOTANI UNNAO KE WARD JAVAHAR NAGAR ME SHAUKAT ALI KI DUKAN SE MUNNA KE DUKAN TAK CC ROAD VA NALI NIRMAN KARYA — Civil Works & Infrastructure · Uttar Pradesh
- Proposed compound wall construction at Ganapathy colony Main road NNMP shed in div 122, unit 26, zone-9 — Civil Works & Infrastructure · Tamil Nadu · ₹2.7L
- Repair Works to Radha Krishna HOR at NITW — Civil Works & Infrastructure · Telangana · ₹9.1L
- Prabhag Kr. 24 D , Magalwar, Kasaba Peth Madhe Vividh Thikani Drainage Lines Chambers Durusti Karane — Civil Works & Infrastructure · Maharashtra · ₹8.4L
- Operation and maintenance of Borewell 21 Nos for 12 Months in Ward No 46 Central Zone — Civil Works & Infrastructure · Tamil Nadu · ₹12.6L
- IMPROVEMENT TO NH 753 BIRSI TO SUKDI KHADIPAR GOREGAON TO NH 753 ROAD SH 714 KM 12/00 TO 18/00 TAH. TIRORA DIST GONDIA — Civil Works & Infrastructure · Maharashtra · ₹2.5Cr
- Project for the construction work of 6 units of Type-3 G Plus 2 residential quarters for Junior Engineers of the Irrigation Workshop Division in Jhansi District — Civil Works & Infrastructure · Uttar Pradesh · ₹3.4Cr