Annual Rate contract for the Purchase of Furniture
Dr. Babasaheb Ambedkar Marathwada University · Chhatrapati Sambhajinagar, Maharashtra · Furniture · open
Key facts
- Tender value: ₹2.0Cr
- EMD: ₹5.0L
- Published: 02 Nov 2026
- Closing date: 17 Nov 2026
- Status: open
- Status as of: 11 Nov 2026 03:07 UTC
- Department: Estate Department
- Office: Registrar
Description
Open tender for an annual rate contract to purchase furniture for Dr. Babasaheb Ambedkar Marathwada University for 2026-27 and 2027-28. Estimated tender value is Rs. 2,00,00,000, with an EMD of Rs. 5,00,000 and tender document fee of Rs. 50,000. Bidders must submit eligibility documents and quote rates in the BOQ. Supply, installation and commissioning are required as specified in purchase orders.
Eligibility & requirements
- Experience required: 3 years
- Startup relaxation: No
- MSE relaxation: No
- Certifications: ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, ISO 50001:2018, BIFMA, GRIHA, AIOTA, Indoor Air Quality
- Documents required: Updated business registration or Shop Act License, Udyog Aadhar/Udyam Aadhar/MSME/NSIC certificate with relevant business activity, Income tax returns for the last three financial years, CA audited/certified financial statements with UDIN, PAN Card, GST Registration, Last financial year's GSTR 3B copy, CA-certified last three years turnover certificate with UDIN, Valid authorization letter or manufacturing certificate, Valid solvency certificate of Rs. 25,00,000 from a National or scheduled Bank, Experience letter/order copy with complete report for any government, semi-government or institute office, Affidavit stating bidder is not blacklisted and not bankrupt, Self-attested documents with stamp, BOQ file with quoted rates
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Item Rate
- Make in India (MII): No
- MSE preference: No
Line items (55)
- 3 Seater Visitors Sofa Waiting Area, Overall Dimensions of Chair, Seat Height - 43.5 cm. Height - 78.5cm. Width & Depth of Chair as - Width-164.0cm and Depth-70.0 cm. Specification:- The side frame assembly shall be fitted to the two ends of the connecting beam assembly to form the leg-cum-armrest assembly. It shall be made of 0 3.81 ±0.03cm. x 0.2±0.016cm. thick cmx0.l6cm and black powder coated (DFT 40-60 microns). The ends shall be fitted with ABS moulded end caps. It shall be the connecting beam assy. which holds the two side frames to each other. 2 nos tie members shall be used to connect the side frames. The tie-member shall be of dia 3.81 ±0.03cm x 02±0.016cm. thick cm x 0.16cm and black powder coated (DFT 40-60 microns ). The seat/back assemblies shall be mounted on one of the tie-member which shall has 5.0 ±0.1cm x 5.0 ±0.1 cm x 0.5±0.1cm. thk 5.5 ±0.1cm Long MS. Std. angles welded to mount the seat and back. The seat rest assembly shall be consists of a fabricated inner-frame — Qty: 1 Nos
- 3 Seater Visitors Sofa Waiting Area, Overall Dimensions of Chair, Seat Height - 40.0 cm. Height - 67.5cm. Width & Depth of Chair as - Width-163.0cm and Depth-57.0 cm. Specification: It should be made up of black powder coated rectangular M.S.ERW tube having 8.0 ± 0.03 cm x 4.0 ± 0.03 cm x 0.2 ± 0.014 cm size. It should be chrome plated made of cold rolled steel with 0.12 ± 0.013 cm thinkness. It should be powder-coated perforated shell made from cold rolled M.S. sheet (DIN1623 Partl ST-12 Grade) 0.14 ± 0.013 cm thickness.The Side Bar should be made of Chrome plated solid steel 3.0 ± 0.03 cm x 1.2 ± 0.3 cm with fluting and plastic inserts. The Shell should be assembled on the Cross Beam with help of M8 Bolts (Per Seat - 8 nos. Seat to Bracket and 4nos. Bracket to Cross Beam). — Qty: 1 Nos
- 3 Seater Visitors Sofa Waiting Area Overall Dimensions of Chair Seat Height - 44.1 cm. Height - 78.5cm. Width & Depth of Chair as - Width-169.5cm and Depth-63.8 cm. Specification: The seat shell should be a welded assembly of seat,back and side frame. The seat and back should be made of 0.12±0.013cm thk CR steel sheet with oblong perforations.They should be welded to sideframe of size 3.2±0.05cm x 0.5 ± 0.05 cm thk HR steel.The welded assembly should be powder coated ( DFT 40-60 microns ). The seat has a front water fall edge to provide popliteal clearance for comfortable seating. It also has a buttock support curve that not only provides rear support but also prevents small children from falling through the gap between seat and back. Clean and flat surfaces of seat and back aids in easy maintenance. * SEAT SIZE : 47.8 cm (W) x 44.6 cm (D) * BACK SIZE : 41.6 cm (W) x 23.0 cm (H) Understructure assembly consshould be ts of connecting beam and leg assembly made of M.S. E.R.W. oblong tube — Qty: 1 Nos
- 3 Seater Visitors Sofa Waiting Area, Overall Dimensions of Chair, Seat Height - 44.1 cm. Height - 78.5cm. Width & Depth of Chair as - Width-169.5cm and Depth-63.8 cm. Specification: SEAT/BACK SHELL: It is powder-coated shell made from cold rolled M.S. sheet 0.12 ± 0.013 cm thickness with circular perforations.The Side Bar is made of cold rolled M.S. sheet 0.12 ± 0.013 cm thickness. The Shell is assembled on the Cross Beam with help of M8 Bolts.* SEAT SIZE : 50.0 cm (W) x 45.5 cm (D)* BACK SIZE : 50.0 cm (W) x 56.0 cm (H) 2. CROSS BEAM: It is made up of cold rolled steel with 0.2 ± 0.02 cm thickness. The crossbeam is powder coated. It is covered with plastic end caps. 3. LEG: It is made up of cold rolled steel with 0.12 ± 0.013 cm thickness. It is powdercoated. The legs are fitted with leveller cups covered with SS304 sheet.4. ARMREST: It is made of SS304 round tube of Ø 3.175 ± 0.03cm x 0.12 ± 0.013 cm thickformed to make an oblong shape. Nylon and should be fitted onto the armrest fra — Qty: 1 Nos
- Acrylic visitor Chair with Cushion (Standar packing of chair 12 Nos Order should be multiple 12 Nos) — Qty: 1 Nos
- Capboard Storewel Plain having 4 adjustable Shelves., Size: 1981 H x 916 W x 486 D Specification:- overall size of 916mm(W)x486mm(D)x1980mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available. The manufacturer should compilant and shall have membership /certification from ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, — Qty: 1 Nos
- Office Tabale Office Table, Size:- 1650 Width x 900 Depth x 728 Height mm Specification:- Table with CPU Hanger size shall be 1650 Width x 900 Depth x 728 Height mm. Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be hor — Qty: 1 Nos
- Exeutive Office L Shape Table (without Pedstal / Drawer) Exeutive Office L Shape Table (without Pedstal / Drawer) Size:- 1800 W x 900 D x 750 H ERU - 1550 x 450 x 705 Specifiction:- Table size shall be 1800 Width mm x 900 Depth mm x 740 Height mm .Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .Flat edge Duly sealed with 2 mm thick PVC beading.The modesty shall be 18 mm thick plain particle board PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading. ERU - RHS size shall be 1550 Width x 450 Depth x 705 Height.The top of ERU -5216 LHS shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL). Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides. Edge sea — Qty: 1 Nos
- Executive Office Table Size:- 1800 x 900 x 750 Specification:- Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Softclosing access flap with in-build power box are provided on work surface for wire management. Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal — Qty: 1 Nos
- Executive Table MAIN TABLES with ERU attached Pedestal (L Shape Table) Main Table Size:- 1800 x 900 x 750, ERU / Side Table :- 1200 x 450 x 750, Overall Size:- 1800 x 2100 x 750 Specification:- Desk Main Tables with ERU attached pedestal. Size: 1800 W x2100 D x750 H Primary Work Surface - made of 25 mm thick MDF one side Pre- laminate board confirming to IS-14587 :1998 with 0.4 mm PVC membrane pressed on to top. soft closing access flap with in-build power box are provided on work surface for wire management. Secondary work surface - made of 25 mm thick MDF one side Pre- laminate board confirming to IS-14587 :1998 with 0.4 mm PVC membrane pressed on to top. Modesty Panel - Made of 25 mm thick MDF one side Pre- laminate board confirming to IS-14587 :1998 with 0.4 mm PVC membrane pressed on to top. Under structure - Made of 25 mm thick - laminate twin board of E1 - P2 grade & approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm PVC lipping. Integrated Pedestal - Mad — Qty: 1 Nos
- Executive Office Table, Size:- 1800 x 900 x 750 Specification:- Work Surface:Made of combination of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top and 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Softclosing access flap with in-build power box are provided on work surface for wire management. Modesty Panel:Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Under- structure:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre- — Qty: 1 Nos
- Executive Table MAIN TABLES with ERU attached Pedestal (L Shape) Main Table Size:- 1800 x 900 x 750, ERU / Side Table :- 1200 x 450 x 750, Overall Size:- 1800 x 2100 x 750 Specification:- Primary Work Surface:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Secondary Work Surface:Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Softclosing access flap with in-build power box are provided on work surface for wire management. Modesty Panel:Made of 25mm thick MDF one side laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Under- structure: Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and ap — Qty: 1 Nos
- High Back Chair (Net Back & Seat Fabric cushion) Specification:- SEAT ASSEMBLY: The seat is made up of 1.5 ± 0.1 cm thick hot - pressed plywood upholstered with fabric and moulded polyurethane foam. SEAT SIZE: 51.8cm (W) x 49.7cm (D)BACK ASSEMBLY: The Back is injection moulded in glass filled Nylon which is upholstered with Mesh fabric.The back consist of adjustable Lumbar support made of injection moulded Poly propylene having an adjustment of 5.0 ±0.1 cm. BACK SIZE: 47.9 cm(W) x 66.9 cm (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m3 and hardness 16 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS (ADJUSTABLE) :The height adjustable armrest is made of Polypropylene and can be adjusted to 6.0±0.1cm height.It also has swivel and To and Fro adjustment with moulded PU armtop. ACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features: 360° revolving type. Front-pivot for tilt w — Qty: 1 Nos
- High Back Chair ( Fabric Chair) Specification:- SEAT/BACK ASSEMBLY: The seat and back should be made up of1.2 ±0.1cm. thick hot pressed plywood and upholstered with fabric and moulded Polyurethane foam with PVC lipping all around. The back foam should be designed with contoured lumbar support for extra comfort. HIGH BACK SIZE 49.0 cm. (W) x 71.0 cm. (H) SEAT SIZE 49.0 cm. (W) x 44.0 cm. (D). HIGH RESILIENCE (HR) POLY URETHANE FOAM: The HR polyurethane foam should be moulded with density = 45 ±2 kg/m3/ and hardness load 16 ± 2 kgf for 25% compression. ARMRESTS :The one-piece armrests made of black integral skin polyurethane with 50-70 Shore ‘A’ Hardness and reinforced with M.S. insert. The armrests should be scratch and weather resistant. The armrests should be fitted to the seat with seat/armrest connecting strip assembly made of 0.5 ± 0.05 cm. thk. HR steel. CENTER TILT mechanism: The mechanism should be designed with the following features: 360° revolving type. 17°±2° maximum tilt on — Qty: 1 Nos
- High Back Chair (Fabric Chair) Specification:- SEAT/BACK ASSEMBLY: The seat and back are made up of 1.2 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. HIGH BACK SIZE 47.5 cm. (W) x 69.5 cm. (H) SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS: The one-piece armrests are injection moulded from black Co-polymer Polypropylene. CENTER TILT SYNCHRO MECHANISM The mechanism is designed with the following features: · 360° revolving type. · 3 position locking · Tilt tension adjustment. TUBULAR FRAME : The powder coated ( DFT 40-60 microns ) tubular frame is cantil — Qty: 1 Nos
- High Back Chair (Leatherette Chair) Specification:- SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done inseat & back for extra fluffiness and comfort in chair. The chair seat & back size are HIGH BACK SIZE 51.5 cm. (W) x 82.0 cm. (H). SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. ARMREST: The 3-way adjustable armrest is is made of die-cast aluminium with buffing finish designed with the following features : Up-Down adjustment–7 steps (7.0 ± 0.5cm rang — Qty: 1 Nos
- High Back Chair (Knitted Fabric Quilted Upholstery for Back) Specifiation:- BACK ASSEMBLY: The seat is made up of 1.2 + 0.1cm US. hot pressed ¿Iyv«ood measured as per QA metlsoJ described in OCP-QLTA-PL14-18.The Back is made up of injection moulded glass filled nylon & upholstered using Quilted Knitted fabric. SEAT SIZE(Standard Seat Depth) 47.0 cm. (W) x 49.5 cm. (D). BANK SIZE : 45 .0 cm. (W) x 65.3 cm. (H) HIGH RESILIENCE (HRj POLYURETHANE FOAM: The HR polyurethane foam is moulded with density 45+/-2 kg/m’ and hardness IN + 2 kgf as per IS: 7888 for 25% compression. ARMRESTS : The adjustable armrest is designed with the following features : Up-Down adjustment— 8 steps (8. 0+0 Scm range). Height adjustable armrest structure which is chrome plated & fitted with an armrest top. Fixed Armrest Top is PU moulded over metal insert LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad with moulded polyurethane foam & covered with polyester fabric The Height of Lumbar pad — Qty: 1 Nos
- High Back Chair (Net Back & Seat Fabric Cushion) Specification:- SEAT/BACK A SSEMBLY: The seat is made up of 1.2 + 0.1cm thk. hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18.The Back is made up of injection mou1ded glass filled nylon & upholstered using Mesh fabric with high tenacity yarn. SEAT SIZE (Standard Seat Depth) 47.0 cm. (W) x 49.5 cm. BACK SIZE : 45.0 cm. (\/V) x 65.3 cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m° and hardness 16 + 2 kgf as per IS:7888 for 25% compression. ARMRESTS : The adjustable armrest is designed with the following features : Up-Down adjustment— 8 steps (8 0+0.Scm range). Height adjustable armrest structure which is Powder Coated & fitted with an armrest top. Fixed Armrest Top is PU moulded over metal insert. LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. The Height of L — Qty: 1 Nos
- High Back Chair (Net Back & Seat Fabric Cushion) Specification:- SEAT/BACK ASSEMBLY: The seat is made up of 1.5 ±0.1cm. thick hot-pressedplywood and upholstered with fabric upholstery covers and moulded Polyurethane foam. The seat has extra thick foam on front edge to give comfort to popliteal area. The Back is injection moulded in glass filled Polypropylene which is upholstered with Mesh fabric.The back consist of adjustable lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 ±0.1 cm. The chair seat & back size are SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D). MESH BACK SIZE 51.0 cm. (W) x 70.0 cm. (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression. ARMRESTS :The adjustable armrest is designed with the following features : Up-Down adjustment– 6 steps (7.2 ± 0.5cm range) Armrest top is mounted on Armrest structure made of glass filled Nylon Armrest — Qty: 1 Nos
- Visitor Chair (Net Back & Seat Fabric Cushion) Specification:- SEAT / BACK ASSEMBLY : The Seat is injection moulded in glass filled Polypropylene compound which is upholstered with fabric upholstery covers and moulded Polyurethane foam. The Back is injection moulded in glass filled Polypropylene compound which is upholstered with Mesh fabric SEAT SIZE : 50.0cm. (W) x 48.0 cm. (D) & BACK SIZE : 53.0 cm. (W) x 39.0cm. (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression. M.S. POWDER COATED FRAMES FOR 4 LEG CHAIRS :The powder coated ( DFT 50±10 microns) welded tubular main frame is made from Ø 2.54 ± 0.03 cm x 0.2 ± 0.016 cm and Ø1.6±0.3mm x 0.16 ± 0.0128cm M.S. E.R.W tube. The Ø1.9 ±0.3mm x 0.12 ±0.0096 cm M.S.E.R.W. tube used as connecting member between LH & RH frames. SHOE : The shoes are made of glass filled Polypropylene compound with and pressed fitted with tubular fram — Qty: 1 Nos
2 tender document(s) available — sign up to download.
Related tenders
- OFFICE FURNITURE AND ASSOCIATED ITEMS — Furniture · Bihar
- Supply of Computer Tables and Chairs for General Purpose — Furniture · Bihar · ₹7.0L
- MISC ITEMS — Furniture · Andaman and Nicobar Islands
- Supply of Commercial Gas Chapati Tawa Bhatti with Puffer Plate, Steel Dining Table, Sony HT 540R Music System, Table Tennis Set, Wall Painting, Dining Chair and Wooden Table — Furniture · Arunachal Pradesh · ₹2.1L
- Procurement of Single Bed Mattresses (Thickness 70 mm) — Furniture · Rajasthan
- Procurement of Single Bed Mattresses (Thickness 60 mm) — Furniture · Rajasthan
- Office furniture and assorted equipment — Furniture · Uttarakhand · ₹1.5L
- Supply of godrej standing storage unit — Furniture · Odisha · ₹80K