Annual maintenance of Submersible pumps and centrifugal pumps for domestic water supply in Bhatadi Colony under BSA of Chandrapur area for 02 years
Western Coalfields Limited · Chandrapur, Maharashtra · Repair, Maintenance & AMC Services · open
Key facts
- Tender value: ₹6.3L
- EMD: ₹8K
- Published: 06 Nov 2026
- Closing date: 17 Nov 2026
- Status: open
- Status as of: 07 Nov 2026 02:53 UTC
- Department: Civil
- Office: Chandrapur Area
Description
Annual maintenance of submersible and centrifugal pumps for domestic water supply in Bhatadi Colony, Chandrapur Area, for 02 years. The work includes pump lowering and lifting, motor rewinding and repairs, pipe and cable supply and installation, and related maintenance. Estimated value is Rs. 628,266; EMD is Rs. 7,900.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage
- Make in India (MII): No
- MSE preference: No
Line items (12)
- 2 — Qty: 3 4
- Lowering and lifting of submersible pump into/from the borewell/sump using suitable chain pulley/block and tackle arrangement, including providing necessary manpower, rigging, handling, disconnecting/reconnecting of delivery pipe/cable where required, alignment, testing, and all incidental works complete as directed by the Engineer-In-Charge. (Note:- The Rate includes Both Lowering and lifting of submersible pump) — Qty: 960 mtrs
- Rewinding of submersible pump motor in borewell of all types and makes up to and including 5 HP with coated copper wire conforming to IS 13730 : 2012, overhauling with minor repairs, lubricating of ball bearings & bush bearing, replacing screws etc. testing for the original speed, H.P. and no load consumption & guarantee for one year. — Qty: 12 nos
- Rewinding of submersible pump motor in borewell of all types and makes above 5 HP up to 25 HP with coated copper wire conforming to IS 13730: 2012, overhauling with minor repairs, lubricating of ball bearings & bush bearing, replacing screws etc. testing for the original speed, H.P. and no load consumption & guarantee for one year. — Qty: 20 nos
- Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984/14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i.e.thread/ insert joint/ quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. PE-100,8Kg/Sq.cm: 63mm — Qty: 240 mtrs
- Lowering, Laying and Jointing H.D.P.E./ M.D.P.E. pipes in properposition including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II 63mm — Qty: 240 mtrs
- Supplying, erecting, testing and commissioning of flat flexible 3 core 6 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. — Qty: 300 mtrs
- Supplying, erecting, testing and commissioning of D.O.L starter suitable for 400 V, 3 phase 50 Hz with no volt coil and overload element with necessary materials and connected to supply above 3 HP to 7.5 HP. — Qty: 6 nos
- Rewinding of electric motor above 15 HP upto 20 HP three phase upto 1400 RPM of all types and makes with copper wire confirming to IS 13730 : 2012, overhauling with minor repairs, lubricating of ball bearings & bush bearing, replacing screws etc. testing for the original speed and no load consumption with guarantee for one year. — Qty: 12 nos
- Replacing the existing non driving end bearing of original make for electric motor AC single phase / three phase 12.5 HP to 20 HP of all types with required alignment of the shaft and testing the same. — Qty: 8 each
- Rewinding of electric motor above 10 HP upto 12.5 HP three phase upto 1400 RPM of all types and makes with copper wire confirming to IS 13730 : 2012, overhauling with minor repairs, lubricating of ball bearings & bush bearing, replacing screws etc. testing for the original speed and no load consumption with guarantee for one year. — Qty: 4 each
- Providing and fixing 10 mm diameter nylon/PP rope for lowering and holding a submersible pump in a borewell, including cutting, tying, fastening, labour and all incidental charges, complete. — Qty: 270 mtrs
1 tender document(s) available — sign up to download.
Related tenders
- KANDRI/ENGG/PUR/2026-27/ 1909 — Repair, Maintenance & AMC Services · Maharashtra · ₹1.4L
- AMC of Cooling Equipments of NPM — Repair, Maintenance & AMC Services · Odisha · ₹6.5L
- Repair and Maintenance Jobs in Unloading and Screening Area of RMHP — Repair, Maintenance & AMC Services · Odisha · ₹53.2L
- Service Engineering Visit for Maintenance of Van Mounted Cable Fault Locator — Repair, Maintenance & AMC Services · Odisha · ₹2.7L
- Emergency Visit for ABB Drives and Automation System — Repair, Maintenance & AMC Services · Odisha · ₹58.4L
- Cylinder Maintenance and Handling Service — Repair, Maintenance & AMC Services · Gujarat · ₹3.1Cr
- THREE YEAR ARC FOR SUPERVISION OF OVERHAULING/SERVICING OF M/S INSTRUMENTATION LIMITED (IL) VALVES AT BPCL KOCHI REFINERY — Repair, Maintenance & AMC Services · Kerala
- THREE YEAR ARC FOR SUPERVISION OF OVERHAULING/SERVICING OF M/S SAMSON VALVES & POSITIONERS, BPCL KOCHI REFINERY — Repair, Maintenance & AMC Services · Kerala