Annual maintenance of Civil Dispensary in Sector 39, Chandigarh (Composite work)

Municipal Corporation, Chandigarh · Chandigarh, Chandigarh · Civil Works & Infrastructure · open

Key facts

Tender value: ₹18.7L
EMD: ₹37K
Published: 31 Oct 2026
Closing date: 09 Nov 2026
Status: open
Status as of: 04 Nov 2026 06:30 UTC
Department: Engineering-MCC
Office: Road Division - II

Description

Composite annual maintenance works at the Civil Dispensary in Sector 39, Chandigarh, including civil repairs, painting, glazing, aluminium work, roofing and public health/plumbing works.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Percentage
Make in India (MII): No
MSE preference: No

Line items (72)

Removing dry or oil bound distemper,water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.DSR 14.46 — Qty: 2288.99 Sqm
Dismantling old plaster or skirting raking out joints. (DSR 15.56) — Qty: 783.44 Sqm
Providing and laying 15mm cement plaster of mix. Complete in all respect to the entire satisfaction of the Engineer-In-Charge. 1:4 (:1 cement : 4 Course Sand) (DSR 13.5.1) — Qty: 299.83 Sqm
Providing and applying JK/Birla putty of 1mm thickness over plastered surface to prepare the surface even and smooth complete. — Qty: 711.85 Sqm
Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer's specification. One or more coats on old work (DSR 13.108.1) — Qty: 1131.08 Sqm
Finishing walls with Acrylic smooth exterior paint : Old work (one or more coats) applied @ 0.90 Ltr./10 Sqm). (DSR 14.66.2) — Qty: 903.86 Sqm
Finishing walls with Acrylic Smooth exterior paint : New work (Two more coat ) complete in all respect and to the entire satisfaction of the Engineer-in-charge. — Qty: 254.05 Sqm
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on New work. (DSR 13.61.1) — Qty: 495.73 Sqm
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. DSR 11.36 — Qty: 483.6 Sqm
Renewing glass panes, with wooden fillets wherever necessary:- Float glass panes of thickness 4.00 mm. (DSR 14.5.1) — Qty: 28.47 Sqm
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.Pre-laminated particle board with decorative lamination on both sides (DSR 21.2.2) — Qty: 17.25 Sqm
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) (DSR 21.3.2) — Qty: 17.25 Sqm
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width (DSR 21.8.1) — Qty: 162.86 Rmt
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) DSR 21.1.1.2 — Qty: 178.94 Kg
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)DSR 21.1.2.2 — Qty: 154.26 Kg
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm DSR 9.96.2 — Qty: 15 Nos.
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : :100x10 mm DSR 9.97.5 — Qty: 26 Nos.
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :100 mm DSR 9.100.2 — Qty: 26 Nos.
Providing & Fixing 0.50mm thick PPGI Sheet roofing including vertical/curved surface fixed with polymer coated with Screws and bitumen & G.I. limpet washers or with G.I. limpet washers on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. — Qty: 37.92 Sqm
Providing and fixing 18mm thick ply board ISI Marked in cabinet including priming coat on unexposed surface, with necessary fixing arrangement and screws, clump etc. satisfaction of Engineer in charge complete — Qty: 70.6 Sqm

1 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
Construction of Segregation Shed and Community Compost Pit at K.N.Savulur H/O K.Naduhalli — Civil Works & Infrastructure · Tamil Nadu · ₹4.0L
Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L