ADDITIONAL WORK FOR WATERPROOFING OF POST OFFICE BUILDING AND FRONT OFFICE BUILDING AND ALUMINIUM WORK IN STATIONARY BRANCH IN PUNJAB AND HARYANA HIGH COURT, SECTOR 1, CHANDIGARH. CH TO SR TO MULTIUTILITY BUILDING AND MULTI-LEVEL PARKING IN PUNJAB AND HARYANA HIGH COURT
Construction Circle - II · Chandigarh, Chandigarh · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹12.7L
- EMD: ₹25K
- Published: 02 Nov 2026
- Closing date: 10 Nov 2026
- Status: open
- Status as of: 04 Nov 2026 06:33 UTC
- Ministry: Chandigarh Administration
- Department: Engineering
- Office: Capital Project Division No. 6
Description
Additional civil works including waterproofing, repairs, flooring, painting and aluminium work at the Post Office Building, Front Office Building and Stationary Branch, and multiutility building and multi-level parking in Punjab and Haryana High Court, Sector 1, Chandigarh.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage
- Make in India (MII): No
- MSE preference: No
Line items (22)
- Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) — Qty: 15 cum
- Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design In 75x75 mm deep chase — Qty: 300 metre
- 15 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) — Qty: 280 sqm
- Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge 75 mm average thickness — Qty: 65 sqm
- Dashing Cement concrete 1:1½ :3 in R.C.C. beams, stairs, slabs, facias etc of average thickness 1” excluding steel reinforcement, centering and shuttering but including curing of the concrete complete in all respects and to the entire satisfaction of the Engineer in charge. — Qty: 65 sqm
- Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge Bars upto 12 mm diameter — Qty: 30 mtr
- Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer- In-charge complete in all respect. SBR Polymer (@10% of cement weight) modified ementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer — Qty: 65 sqm
- Providing and Fixing chicken mesh on RCC beams, facias etc. wherever required with wooden gutties, nails and screws including drilling holes etc complete as per directions of the Engineer-in-charge. — Qty: 65 sqm
- Providing and applying two or more coat of water repellent on the existing surface for providing effective water repellence. The material shall be ready to use like FOSROC Nitocote SN 522 or equivalent. The product shall be colourless and under no circumstance shall change the colour of the surface, as such product shall be applied after conducting trials on different surfaces. The product shall be silicon based water repellent and shall comply to BS 6744-92 class A. The surface shall be cleaned with broghs before application of water repellent for optinal bonding and the material should be apply @ 1 ltr/7 sqm per litre with paint brush only including charges of ladders or scaffolding or crane upto 25 meter height complete in all respects and to the entire satisfaction of the Engineer in charge. NS. — Qty: 280 Sqm
- Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm. — Qty: 35 sqm
- Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick — Qty: 45 Sqm
- Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, includingnecessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) — Qty: 460 kg
- Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fitti — Qty: 100 kg
- Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side — Qty: 35 sqm
- Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not lessthan 10kg/sqm) — Qty: 45 sqm
- Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. — Qty: 30 each
- Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 125 mm — Qty: 30 each
- Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) — Qty: 10 cum
- Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete — Qty: 360 sqm
- Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. — Qty: 360 sqm
1 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
- Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
- CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
- Construction of Segregation Shed and Community Compost Pit at K.N.Savulur H/O K.Naduhalli — Civil Works & Infrastructure · Tamil Nadu · ₹4.0L
- Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
- Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
- P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L