65/HDA/EC-ELECT/2026 2027

Haldia Development Authority · Haldia, West Bengal · HVAC & Cooling · open

Key facts

Tender value: ₹63.4L
EMD: ₹1.3L
Published: 03 Oct 2026
Closing date: 20 Nov 2026
Status: open
Status as of: 14 Nov 2026 06:00 UTC
Office: Haldia Development Authority

Description

Supplying, installation, testing and commissioning of balance work of HVAC System at Trauma Care Centre, Haldia, Purba Medinipur.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Percentage
Make in India (MII): No
MSE preference: No

Line items (33)

Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180- 260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 0C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat ex — Qty: 4 No.
b) First floor 2.0 TR with 5 Star BEE Rating — Qty: 1 No.
c) 1.0 TR with 5 Star BEE Rating — Qty: 1 No.
Supplying, installation , testing and commissioning of Air cooled ductable type Packaged air-conditioning units complete with Hermetically sealed Scroll compressors fitted inside the indoor unit & first charge of refrigerant R410A or equilant permitted green refrigerant & oil ,air cooled condenser, fan section with statically/dynamically balanced centrifugal blower driven by a Totally Enclosed Fan Cooled (TEFC) squirrel cage three speed motor, Multi rows cooling coil of copper with aluminium fins etc. The enclosures shall be fabricated of M.S. The Package unit shall be equipped with synthetic fiber filter, insulated drain pan, controls all encased in a unit. The casing shall be factory powder coated. Electrical panel board for Package units shall comprise of control and power panel with including all associries i/c Voltage scanner, overload, low voltage, high voltage & phase imbalance protection, along with VI Pads complete with all ancillaries including MS painted stand for Outdoor un — Qty: 1 No.
b) 5.0 TR (2.8 EER) for SICU — Qty: 1 No.
c) 5.0 TR (2.8 EER) for Autoclave Room — Qty: 1 No.
Supplying, installing, testing and commissioning of INLINE FANS suitable for installing in any position in vertical or horizontal ducts. The casing shall be double skin, internally acoustically lined and constructed of galvanised steel. The fan shall be DIDW with forward curve impeller fitted withmaintenance free external rotor motor. The motor shall be suitable for 220+10% volt single phase 50 cycles AC supply. All units shall be complete with duct flexible connector and volume control damper and Electrical Stater panel.The fan shall have low sound level exceeding not more than 40 DBA at three metre distance. DESCRIPTION: CFM Esp (in mm wg) a) Toilet Exhaust Fan for Ground Floor 700 5 — Qty: 1 No.
b)Toilet Exhaust Fan for Third Floor 1000 5 — Qty: 1 No.
c)Toilet Exhaust Fan for Third Floor 350 2 — Qty: 1 No.
d)Toilet Exhaust Fan for Terrace Floor 1000 5 — Qty: 1 No.
e) Toilet Exhaust Fan for Terrace Floor 3000 5 — Qty: 1 No.
Supply, installation, testing & commissioning of AXIAL FLOW FAN suitable for installing in any position in Horizontal or vertical DBR for 50 Beded Level-III Trauma Care Unit cum Hospital at multi sheaved pulley mounted on motor and fan shaft, belt guard, motor mount and vibration isolators. The fan shall be selected for low noise level and low RPM (less than 1000 RPM) Fan motor shall be suitable for 415 + 10% volts, 50 cycles, 3 and complete with totally enclosed fan cooled motor belt dri equipped with mounting bracket & outlet core required at discharge, all control wireing and Electrical stater Panel, Fan capacity based on minimum 10mm external static pressure, total static pressure shall be checked by vendor based on the application for the G+4 Hospital Building. DESCRIPTION: CFM Lift Well Pressurization 11000 — Qty: 4 No.
Supplying, installing, testing and commissioning of direct driven PROPELLER FANS for exhaust air as shown in drawings. Each fan shall be complete with permanent split capacitor or shaded pole motor, mounting plate, accessories like wire guard, bird screen and fixed louvers for weather protection as required. Fan selection arrangement and Electrical characteristics shall be as follows: 300mm dia 1000cm 700 RPM fan suitable for 415+10% volts 50 cycles, 3 phase AC supply. Note:- To be located at LT Panel room and PHE Plant room — Qty: 10 No.
200 mm dia 100cfm 700 RPM fan suitable for 415+10% volts 50 cycles, 3 phase AC supply. Note:- To be located at ground floor, first and second floor toilet exhaust — Qty: 24 No.
250 mm dia 300cfm 700 RPM fan suitable for 415+10% volts 50cycles, 3 phase AC supply.Note:- To be located at ground floor shower room exhaust — Qty: 1 No.
Supplying, installing, testing and commissioning of AlR HANDLING UNITS (FAN SECTION ONLY) with double skin construction as per specificatons, each complete with squirrel cage induction motor (mounted internally), centrifugal fan belt drive and vibrations isolators. Motors shall be suitable for 415 + 10% volts, 50 cycles, 3 phase AC supply and static pressure shall be 10mm meeting criterion as per ASHRAE Standered 90.1-2007 and high efficiency. Fan-motor assembly (as whole) shall be statically & dynamically balanced to grade G6.3 as per ISO-1940/AMCA 204-3. All AHUS (Fan sections) shall be suitable for outdoor duty. In additional all supply fans (SF) shall be provided with prefilter. All units shall be complete with duct flexible connector and volume control damper and Electrical Stater panel. DESCRIPTION CFM Esp (in mm wg) STP and PHE Plant room ventilation - 5000 - 10 Note: All fans in item no 6. to be consider for outdoor application. Note: All exposed electrical panel shall be provi — Qty: 2 No.
AIR DISTRIBUTION (FOR DUCTS FABRICATED AT SITE AS PER "IS" CODES) Supply,Fabrication,installation and testing of Sheet metal ducts in accordance with the approved shop drawings and as required by the specifications. A)26 gauge galvanised sheet steel. — Qty: 370 Sq.m
b)22 gauge galvanised sheet steel. — Qty: 50 Sq.m
c) 24 gauge galvanised sheet steel. — Qty: 15 Sq.m
Supply, installation, testing and commissioning of motorised combined smoke & fire damper (UL listed) complete with control panel, inter connecting wiring at locations shown in approved shop drawings and as per specifications. a)Smoke & Fire Dampers — Qty: 15 Sq.m

1 tender document(s) available — sign up to download.

Related tenders

Split Air Conditioner, Wall Mount Type (V3) ISI Marked to IS 1391 (Part 2) — HVAC & Cooling · Gujarat · ₹4.7L
Split Air Conditioner, Wall Mount Type (V3) ISI Marked to IS 1391 (Part 2) — HVAC & Cooling · Jammu and Kashmir
Supply, Installation, Testing and Commissioning of 17 Unitary Air Conditioners (Window AC) — HVAC & Cooling · Punjab · ₹6.7L
Supply of Split Air Conditioners and Servo Motor Operated Automatic Line Voltage Correctors — HVAC & Cooling · Ladakh
Split Air Conditioner, Ceiling Mount Type (Cassette) (V3) ISI Marked to IS 1391 (Part 2) — HVAC & Cooling · Manipur
Air Purifier — HVAC & Cooling · Delhi
Tender for AC works at SBI High Court branch Prayagraj — HVAC & Cooling · Uttar Pradesh · ₹6.0L
Supply, Installation, Testing and Commissioning of Split Air Conditioner, Wall Mount Type (V3) ISI Marked to IS 1391 (Part 2) — HVAC & Cooling · Uttarakhand