14/Fire/2026-27
New Delhi Municipal Council · New Delhi, Delhi · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹9.1L
- EMD: ₹18K
- Published: 05 Nov 2026
- Closing date: 19 Nov 2026
- Status: open
- Status as of: 16 Nov 2026 03:11 UTC
- Department: Fire
Description
Fire fighting arrangements in various NDMC buildings during 2026-27. This work involves providing and fixing a fire-fighting system as per the Delhi Fire Service audit report at 36, Mahadev Road, New Delhi.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage
- Make in India (MII): No
- MSE preference: No
Line items (29)
- 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) — Qty: 0.85 Cum
- Steel Work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat cost of approved steel primer using structural steel etc. as reqd. In stringers, treads, landing etc of stair cases, including use of chequered plate wherever required, all complete — Qty: 85 Kg.
- Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. — Qty: 10 Sqm
- Providing and Fixing hard drawn steel wire fabric of size 75 x 25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of "L" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approbed by Engineer-In-Charge. — Qty: 14 Sqm
- Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank — Qty: 5000 Litre
- 25 mm dia — Qty: 30 Metre
- 80 mm dia — Qty: 5 Metre
- 100 mm dia — Qty: 15 Metre
- Supplying and fixing Single Headed Internal / External Hydrant Valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with 80 mm dia flanged inlet, cast iron wheel ISI marked conforming to IS 5290 (Type-A) with blank Gunmetal/Stainless Steel cap, chain and all accessories as required etc. complete to the entire satisfaction of Fire Officer. Single Headed Stainless Steel — Qty: 1 Nos.
- 80 mm dia — Qty: 2 Nos.
- 100 mm dia — Qty: 2 Nos.
- 80 mm dia — Qty: 2 Nos.
- Supplying and fixing First-Aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS:12585. 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30 M Long — Qty: 1 Nos.
- Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. — Qty: 1 No.
- Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required — Qty: 1 No.
- Supplying and fixing of Reinforced Rubber Lined (RRL) Fire Hose Type 3, ISI Marked conforming to IS:636, 15 mtr long with ISl marked Stainless Steel coupling dia 63 mm with GI Binding etc. complete to the entire satisfaction of Fire Officer. — Qty: 2 Nos.
- (a) Providing, Fixing, Testing and Commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, completein all respects, as required : (Terrace Pump) (b) Centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal as required. (c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply. (d) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts ete.as required. (e) Suitable cement concrete foundation duly plastered and with anti vibration pads 450 LPM at 40 m Head — Qty: 1 Nos. Set
- Supplying, installing, testing and commissioning of Diesel Engine Driven Terrace Fire Pump (Booster Pump) suitable for automatic operation, consisting of the following, complete in all respects as required : (a) Centrifugal pump of cast iron body, bronze/gun metal impeller with stainless steel shaft, and mechanical seal, designed to deliver a specified flow rate at a rated head. (b) Suitable BHP,4-stroke, multi-cylinder diesel engine equipped with an automated/manual dual-starting mechanism (battery start), standard instrumentation, residential-type silencer, and fuel tank. (c) M.S. fabricated common base plate, flexible coupling, coupling guard, and foundation bolts. (d) Equipment support foundation consisting of a cement concrete block duly plastered, fitted with anti-vibration pads. 450 LPM at 40 m head — Qty: 1 Nos. Set
- P/F/T/C of custom designed Electrical panel made out of 16 gauge MS sheet, for manual operation of existing two terrace pump panles, with suitable operating push switces, and indication lamps etc. complete as required — Qty: 1 No.
- Providing and fixing of G.I.Tank connection including nipple, washer, socket, check nut outside and inside and making necessary connection etc. complete as per the direction of Fire Officer (80 MM Dia). — Qty: 1 No.
1 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- Improvement such as widening and strengthening of Lalitgiri Museum to Kalianti Bridge via Haribhaktapur-Jerakanda road from 0/000 km to 7/575 km in the district of Kataka under State Plan — Civil Works & Infrastructure · Odisha · ₹20.6Cr
- Renovation of Dharamshala in New Yadvindra Colony, ward no. 20 at Patiala. — Civil Works & Infrastructure · Punjab · ₹42.2L
- Lining/Relining of water course of Outlet R.D 6000-R of mr. no 4 of Newada Disty Village Talwandi Malik, Khattriwala Distt. Patiala — Civil Works & Infrastructure · Punjab · ₹60.0L
- Outsourcing of Labour Part for Erection, Testing Commissioning of New 11KVLT/HTLines on Rail/PCC Poles, Distribution T/Fs, Augmentation/Sagging of ACSR of HT/LT Lines, Cables laying, Guarding, Stay Setfor Various Works — Civil Works & Infrastructure · Punjab · ₹60.0L
- Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
- Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
- Remodelling and renovation Pond Rara Sahib Chowk Somal kheri Np Maloudh — Civil Works & Infrastructure · Punjab · ₹22.3L