06/EE/EMU/AUD/2026-27

Dr. B.R. Ambedkar University Delhi · Delhi, Delhi · Electrical Equipment & Supplies · open

Key facts

Tender value: ₹1.8L
EMD: ₹4K
Published: 22 Oct 2026
Closing date: 12 Nov 2026
Status: open
Status as of: 09 Nov 2026 05:21 UTC
Department: Engineering & Maintenance Unit
Office: Engineering & Maintenance Unit, Lothian Road, Kashmere Gate, Delhi - 110006

Description

Supplying, installation, testing and commissioning of LED street lights, flood lights and post top lanterns, including laying of cable, at the Karampura campus of Dr. B.R. Ambedkar University Delhi.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No
Certifications: LM79 and LM80 test reports, BIS testing documentation for LED fixtures
Documents required: Enlistment order or valid registration certificate in appropriate category in CPWD, MES, BSNL or another Government Organisation, Work order and completion certificate for similar works, GST registration certificate or applied copy, PAN card, Receipt for deposition of original quotation cost and EMD, as applicable, Work experience completion/performance certificates indicating value of work done, Documents supporting turnover for the last 3 years, Signed price bid undertaking on letterhead as per the format, Demand draft/pay order for quotation cost and EMD

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Item Rate two bid system
Evaluation: Financial bids of qualified and technically acceptable bidders; lowest bid not guaranteed acceptance
Make in India (MII): No
MSE preference: No

Line items (7)

LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt). Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per A — Qty: 6 Each
LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy ≥ 135 lm/Watt). Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg - 120 deg as per the application and the project requirement, suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K /4000°K / 5700°K /6500°K (As per ANSI Bin),SDCM(Standard Deviation Colour M — Qty: 12 Each
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Upto 35 sq. mm — Qty: 120 Meter
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3 X 10 sq. mm (22mm) — Qty: 1 Each
Supply and Installation of LED Post top lantern with die cast aluminium spigot, spun aluminium powder coated top cover and clear acrylic diffuser IP 65 (CAT Ref. HLPT-04-40-CW or equivalent) — Qty: 2 Each
Supplying, Installation, Testing and Commissioning of 40W LED decorative post top lantern with die cast aluminium Housing and OPAL PC difusser, IP 65 ( CAT Ref. HLPT-21-40-CW or equivalent). — Qty: 3 Each
Supply of 1.1 KV grade XLPE armoured aluminium conductor cable of size 3 X 10 sq.mm — Qty: 120 Meter

2 tender document(s) available — sign up to download.

Related tenders

SUPPLY OF V.F TRANSFORMER OF RATIO 470:600 OHMS (CYLINDER TYPE) — Electrical Equipment & Supplies · Madhya Pradesh
Handheld Rechargeable Pocket Torch — Electrical Equipment & Supplies · Madhya Pradesh
Procurement of Digital Dial Indicator and Stainless Steel Flexible Magnetic Base stand — Electrical Equipment & Supplies
Supply and delivery of Enersys make Battery SUPERSAFE Vb 2415, Nominal Voltage: 2V Capacity: 1710Ah @C10 along with Buy back of Old Cell (Batteries) — Electrical Equipment & Supplies · Tamil Nadu
XLPE Cable for Working Voltage up to and Including 1.1 KV Marked To IS 7098 (Part 1) — Electrical Equipment & Supplies · Madhya Pradesh
Decorative Lightning Pole (V2) — Electrical Equipment & Supplies · Gujarat · ₹4.5L
Electric Ceiling Fan (V4) ISI Marked to IS 374 — Electrical Equipment & Supplies · Uttar Pradesh
Procurement of 1 KVA UPS — Electrical Equipment & Supplies · Karnataka